All commands (14,187)

  • will show: installed linux headers, image, or modules: /^ii/!d avoiding current kernel: /'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d only application names: s/^[^ ]* [^ ]* \([^ ]*\).*/\1/ avoiding stuff without a version number: /[0-9]/!d Show Sample Output


    4
    dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d'
    plasticdoc · 2009-06-19 10:23:38 8
  • will purge: only installed apps: /^ii/!d avoiding current kernel stuff: /'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d using app names: s/^[^ ]* [^ ]* \([^ ]*\).*/\1/ avoiding stuff without a version number: /[0-9]/!d


    7
    dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' | xargs sudo apt-get -y purge
    plasticdoc · 2009-06-19 10:11:00 9
  • This commands will make it easier to select only common items between two files being compared. If your lines start with things other than lowercase a-z, adjust this Regex appropriately. Number of lines in the output has been set to no more than 10000, and should be adjusted as needed.


    -1
    gdiff --unified=10000 input.file1 inpute.file2 | egrep -v "(^\+[a-z]|^\-[a-z])"| sort > outputfile.sorted
    slashdot · 2009-06-18 20:35:00 8
  • Stuck behind a restrictive firewall at work, but really jonesing to putty home to your linux box for some colossal cave? Goodness knows I was...but the firewall at work blocked all outbound connections except for ports 80 and 443. (Those were wide open for outbound connections.) So now I putty over port 443 and have my linux box redirect it to port 22 (the SSH port) before it routes it internally. So, my specific command would be: iptables -t nat -A PREROUTING -p tcp --dport 443 -j REDIRECT --to-ports 22 Note that I use -A to append this command to the end of the chain. You could replace that with -I to insert it at the beginning (or at a specific rulenum). My linux box is running slackware, with a kernel from circa 2001. Hopefully the mechanics of iptables haven't changed since then. The command is untested under any other distros or less outdated kernels. Of course, the command should be easy enough to adapt to whatever service on your linux box you're trying to reach by changing the numbers (and possibly changing tcp to udp, or whatever). Between putty and psftp, however, I'm good to go for hours of time-killing.


    10
    iptables -t nat -A PREROUTING -p tcp --dport [port of your choosing] -j REDIRECT --to-ports 22
    brizznown · 2009-06-18 17:38:59 11
  • additionally use "find /etc/cron*" for cronscripts Show Sample Output


    1
    cut -d: -f1 /etc/passwd | grep -vE "#" | xargs -i{} crontab -u {} -l
    hoberion · 2009-06-18 16:49:52 9
  • Sometimes you're trying to read through an xml file to determine whats wrong with it and a tool had removed all the linebreaks. xmllint will go ahead and make it pretty for you.


    4
    xmllint --format <filename> > <output file>
    topperge · 2009-06-18 15:00:30 6

  • 0
    shred -vzu /tmp/junk-file-to-be-shredded
    mpb · 2009-06-18 12:00:19 11
  • imports a public key from the web. I know this by head.. but useful nevertheless Show Sample Output


    2
    curl -s http://defekt.nl/~jelle/pubkey.asc | gpg --import
    wires · 2009-06-18 11:26:03 9
  • Appended to grub boot parameters ... gives shell ... password recovery


    2
    init=/bin/bash; mount -o remount,rw /
    m03hr3 · 2009-06-18 08:51:24 6
  • I had some trouble removing empty lines from a file (perhaps due to utf-8, as it's the source of all evil), \W did the trick eventually.


    0
    grep -v "^\W$" <filename>
    nikc · 2009-06-18 08:17:22 17

  • 2
    find directory -size +nnn
    miccaman · 2009-06-18 06:55:00 6

  • 1
    ls -s | sort -nr | more
    miccaman · 2009-06-18 06:44:01 29
  • Starts midnightcommander and allows you to detach the console; use ctrl-\ to detach Then at a later time you can reconnect using dtach -a /tmp/wires-mc In my experience dtach works much better for programs like irssi, mutt, mc, aptitude than screen does.


    5
    dtach -c /tmp/wires-mc mc
    wires · 2009-06-17 22:18:25 12
  • search the newest *.jpg in the directory an make a copy to newest.jpg. Just change the extension to search other files. This is usefull eg. if your webcam saves all pictures in a folder and you like the put the last one on your homepage. This works even in a directory with 10000 pictures.


    1
    cp `ls -x1tr *.jpg | tail -n 1` newest.jpg
    Psychodad · 2009-06-17 20:32:04 9
  • Using the grep command, retrieve all lines from any log files in /var/log/ that have one of the problem states


    6
    grep -2 -iIr "err\|warn\|fail\|crit" /var/log/*
    miketheman · 2009-06-17 19:41:04 10
  • This will create a 10 MB file named testfile.txt. Change the count parameter to change the size of the file. As one commenter pointed out, yes /dev/random can be used, but the content doesn't matter if you just need a file of a specific size for testing purposes, which is why I used /dev/zero. The file size is what matters, not the content. It's 10 MB either way. "Random" just referred to "any file - content not specific" Show Sample Output


    1
    dd if=/dev/zero of=testfile.txt bs=1M count=10
    mstoecker · 2009-06-17 17:06:16 14

  • 2
    qlook() { qlmanage -p "$@" >& /dev/null & }
    mikedamage · 2009-06-17 16:02:34 5

  • 7
    pbpaste > newfile.txt
    mikedamage · 2009-06-17 15:14:22 8
  • Makes any files in the current directory (and any sub-directories) group-readable. Using the "! -perm /g=r" limits the number of files to only those that do not already have this property Using "+" on the end of the -exec body tells find to build the entire command by appending all matching files before execution, so invokes chmod once only, not once per file.


    3
    find . -type f ! -perm /g=r -exec chmod g+r {} +
    sanmiguel · 2009-06-17 13:39:59 5
  • Makes it easy to add keys to new ppa sources entries in apt sources.list Now to add the key for the chromium-daily ppa: launchpadkey 4E5E17B5 Show Sample Output


    9
    alias launchpadkey="sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys"
    azeey · 2009-06-17 12:02:27 10
  • Useful if you have to put together multiple files into one and they are scattered across subdirectories. For example: You need to combine all .sql files into one .sql file that would be sent to DBAs as a batch script. You do get a warning if you create a file by the same extension as the ones your searching for. find . -type f -name *.sql -exec cat {} > BatchFile.txt \;


    4
    find . -type f -name *.ext -exec cat {} > file.txt \;
    realgt · 2009-06-17 11:33:14 15
  • There are two ways to use "here documents" with bash to fill stdin: The following example shows use with the "bc" command. a) Using a delimiter at the end of data: less-than less-than eeooff bc > k=1024 > m=k*k > g=k*m > g > eeooff 1073741824 b) using the "inline" verion with three less-than symbols: less-than less-than less-than "k=1024; m=k*k; g=k*m; g" bc 1073741824 One nice advantage of using the triple less-than version is that the command can easily be recalled from command line history and re-executed. PS: in this "description", I had to use the name "less-than" to represent the less-than symbol because the commandlinefu input text box seems to eat up the real less-than symbols. Odd. Show Sample Output


    9
    <<<"k=1024; m=k*k; g=k*m; g" bc
    mpb · 2009-06-17 10:35:10 12
  • You need sysstat and gawk for this to work. Show Sample Output


    0
    for x in `seq -w 1 30`; do sar -b -f /var/log/sa/sa$x | gawk '/Average/ {print $2}'; done
    unixmonkey4319 · 2009-06-17 02:46:52 4
  • This set of commands was very convenient for me when I was preparing some xml files for typesetting a book. I wanted to check what styles I had to prepare but coudn't remember all tags that I used. This one saved me from error-prone browsing of all my files. It should be also useful if one tries to process xml files with xsl, when using own xml application.


    2
    grep -h -o '<[^/!?][^ >]*' * | sort -u | cut -c2-
    thebodzio · 2009-06-17 00:22:18 10
  • In the above example all files have 4 lines. In "file1" consecutive lines are: "num, 1, 2, 3", in "file2": "name, Jack, Jim, Frank" and in "file3": "scores, 1300, 1100, 980". This one liner can save considerate ammount of time when you're trying to process serious portions of data. "-d" option allows one to set series of characters to be used as separators between data originating from given files. Show Sample Output


    8
    paste -d ',:' file1 file2 file3
    thebodzio · 2009-06-17 00:11:04 12
  • ‹ First  < 484 485 486 487 488 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

Gets the english pronunciation of a phrase
Usage examples: say hello say "hello world" say hello+world

Generat a Random MAC address
Generate a random MAC address with capital letters

Extract tarball from internet without local saving

Check whether laptop is running on battery or cable
The original proc file doesn't exist on my system.

Install pip with Proxy
Installs pip packages defining a proxy

Track X Window events in chosen window
After executing this, click on a window you want to track X Window events in. Explaination: "xev will track events in the window with the following -id, which we get by greping window information obtained by xwininfo"

dont execute command just add it to history as a comment, handy if your command is not "complete" yet

list files recursively by size

Get the IP address
gives u each configured IP in a seperate line.

Replicate a directory structure dropping the files


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: