All commands sorted by votes

All commands (14,187)

sorted by

archlinux: remove a package completely from the system

Removes the package, 'packagename' in the example ,from your system. '-R' is the actual removal option, 'n' is for removing backup configuration files saved by pacman, and 's' is for removing the dependencies of the given package which are not required by other packages. pacman does not remove configuration files, etc. created by the package.
This is sample output - yours may be different.
-1

sudo pacman -Rns packagename

newnumber · 2017-06-20 12:14:03 17

To find how Apache has been compiled from commandline

To get information at your fingertips about Apache compilation. Show Sample Output

-1

httpd2 -V

unixbhaskar · 2009-08-29 13:04:37 3

Compressed Backup of the /etc

Simple Compressed Backup of the /etc Linux compatible
This is sample output - yours may be different.
-1

tar jcpf /home/[usuario]/etc-$(hostname)-backup-$(date +%Y%m%d-%H%M%S).tar.bz2 /etc

mack · 2011-04-29 22:53:11 4
dd if=/dev/null of=/dev/sda

Exactly the same effect with 3 less characters ;-) (Removes all files/filesystems of a harddisk. It removes EVERYTHING of your hard disk. Be careful when to select a device.) You can press Ctrl + C after few seconds (No output)
This is sample output - yours may be different.
-1

cat /dev/zero > /dev/sda

fhh · 2013-09-13 21:47:48 7
Check your unread Gmail from the command line
This is sample output - yours may be different.
-1

mtr www.google.com

slu4aen · 2014-10-08 06:55:32 9
Reorder file with max 100 file per folder

If you have a folder with thousand of files and want to have many folder with only 100 file per folder, run this. It will create 0/,1/ etc and put 100 file inside each one. But find will return true even if it don't find anything ... Show Sample Output
This is sample output - yours may be different.
```
Nothing but files and folder
```
-1

folder=0;mkdir $folder; while find -maxdepth 1 -type f -exec mv "{}" $folder \; -quit ; do if [ $( ls $folder | wc -l ) -ge 100 ]; then folder=$(( $folder + 1 )); mkdir $folder; fi ; done

Juluan · 2011-02-11 21:28:01 4
Edit all source files of project with vim, each on separate tab
This is sample output - yours may be different.
-1

vim -p `ls *.java *.xml *.txt *.bnd 2>/dev/null`

yababay · 2011-06-11 20:15:08 3

check open ports (both ipv4 and ipv6)

This option selects the listing of all Internet and x.25 (HP-UX) network files. Show Sample Output

-1

lsof -i

shsingh · 2011-10-03 02:06:30 3

ssh hostchange know_host improver

If you work in an environment, where some ssh hosts change regularly this might be handy...
This is sample output - yours may be different.
-1

sshostnew () {sed -i "$1d" $HOME/.ssh/known_hosts ; }

_john · 2011-11-07 10:33:04 10
displays a reminder message at the specified time
This is sample output - yours may be different.
-1

echo "DISPLAY=$DISPLAY xmessage convert db to innodb" | at 00:00

op4 · 2010-02-04 04:02:35 4
Colored cal output

Colors a the current date in cal output Show Sample Output
This is sample output - yours may be different.
```
     April 2011
Su Mo Tu We Th Fr Sa
                1  2
 3  4  5  6  7  8  9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
```
-1

cal | sed -E "2,8s/(^|[^0-9])($(date +%e))( |$)/\1$(echo "\033[0;36m\2\033[0m")\3/g"

iridium172 · 2011-04-30 03:16:31 56
Ignore ~/.vimrc when startup gVim
This is sample output - yours may be different.
-1

gvim -u NONE -U NONE

kev · 2011-06-12 10:56:14 3
Show internet IP Address in prompt --> PS1 var
This is sample output - yours may be different.
-1

export PS1="[\u@`curl icanhazip.com` \W]$ "

peshay · 2011-11-07 14:48:16 7
Grab your bibtex file from CiteULike.

I love CiteULike. It makes keeping a bibtex library easy and keeps all my papers in one place. However, it can be a pain when I add new entries and have to go through the procedure for downloading the new version in my browser, so I made this to grab it for me! I actually pipe it directly into a couple of SED one liners to tidy it up a bit too. Extremely useful, especially if you make a custom BibTeX script that does this first. That way you can sort a fresh BibTeX file for each new paper with no faf. To use just replace with your CiteULike user name. It doesn't download entries that you've hidden but I don't use that feature anyway.
This is sample output - yours may be different.
-1

curl -o <bibliography> "http://www.citeulike.org/bibtex/user/<user>"

qubyte · 2009-03-26 23:08:14 6
get users process list
This is sample output - yours may be different.
-1

ps -u<user>

sathyz · 2009-09-16 05:24:41 3
Get all the HTTP HEAD responses from a list of urls in a file

urls.txt should have a fully qualified url on each line prefix with rm log.txt; to clear the log change curl command to curl --head $file | head -1 >> log.txt to just get the http status Show Sample Output
This is sample output - yours may be different.
```
==log.txt:==
/downloads HTTP/1.1 301 Moved Permanently
/downloads/ HTTP/1.1 404 Not Found
/downloads/downloads/press/logos.zip HTTP/1.1 200 OK
```
-1

for file in `cat urls.txt`; do echo -n "$file " >> log.txt; curl --head $file >> log.txt ; done

Glutnix · 2010-10-19 02:54:13 5
Start a Google Chrome profile with an X11 based interactive prompt

Simple Google Chrome profile manager using zenity for profile name input. Place this in a shell script and then use the path to it as the command field in a gnome/kde shortcut. When you start it you will be prompted for a profile to use, if you leave it blank you should get the default profile. Show Sample Output
This is sample output - yours may be different.
```
This is interactive in X11.
```
-1

/opt/google/chrome/google-chrome --user-data-dir=$HOME/.config/google-chrome/`zenity --entry --text="Enter a profile name:"`

gml · 2011-01-06 19:41:45 5
bulk rename files with sed, one-liner
This is sample output - yours may be different.
-1

ls | sed 'p;s/foo/bar/' | xargs -n2 mv

pkufranky · 2011-04-30 10:56:35 3
Rip CD

Can be useful to rip a CD. Show Sample Output
This is sample output - yours may be different.
```
function ripcd {
	ripit -c 0 --outputdir $1 --nosubmission
}
```
-1

ripit -c 0 --outputdir $1 --nosubmission

UnixNeko · 2011-06-12 12:29:26 3
Show git branches by date - useful for showing active branches

simple table
This is sample output - yours may be different.
-1

for k in `git branch -r|awk '{print $1}'`;do echo -e `git show --pretty=format:"%Cgreen%ci_%C(blue)%c r_%Cred%cn_%Creset" $k|head -n 1`$k;done|sort -r|awk -F"_" '{printf("%s %17s %-22s %s\n",$1,$2,$3,$4)}'

varon · 2012-10-29 12:38:24 6
Write a bootable Linux .iso file directly to a USB-stick (macOS edition)

Some of us have both Macs *and* Linux machines — so it makes sense to know how to run this command on the former in the event that a botched reinstallation renders the latter unbootable.
This is sample output - yours may be different.
-1

sudo curl -L -o /dev/disk4 https://some-distributor.org/some-distro.iso

realkstrawn93 · 2022-06-20 17:25:39 829
SVN Add Recursively

This adds all new files to SVN recursively. It doesn't work for files that have spaces in their name, but why would you create a file with a space in its name in the first place?
This is sample output - yours may be different.
-1

svn status | grep "^\?" | awk '{print $2}' | xargs svn add

unixfu73000 · 2009-03-12 15:06:12 8
Make an iso file out of your entire hard drive

Similar.
This is sample output - yours may be different.
-1

dd if=/dev/hda of=file.img

yooreck · 2009-11-09 16:05:17 5
Find out my commits today in svn
This is sample output - yours may be different.
-1

svn log | grep "$LOGNAME" | grep `date '+%Y-%m-%d'`

jimthunderbird · 2010-04-07 22:12:12 7
Convert all tabs in a file to spaces, assuming the tab width is 2

Change the number to change the number of spaces. Leaving it out defaults to 8. Leaving out the filename defaults to stdin. And to do it in reverse, you can use the unexpand command.
This is sample output - yours may be different.
-1

expand -t 2 <filename>

camocrazed · 2010-07-13 23:04:57 3
‹ First < 489 490 491 492 493 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

sleep for 1/10s or 1/100s or even 1/1000000s

sleep in microseconds instead of seconds Alternatively to usleep, which is not defined in POSIX 2008 (though it was defined up to POSIX 2004, and it is evidently available on Linux and other platforms with a history of POSIX compliance), the POSIX 2008 standard defines nanosleep

merge vob files to mpg

Share a terminal screen with others

If you enable multiuser, then you can permit others to share your screen session. The following conditions apply: 1. screen must be suid root; 2. "multiuser on" must be configured in ~/.screenrc; 3. control the others user(s) access with "aclchg": # ----- from ~/.screenrc-users ----- aclchg someuser +rx "#?" #enable r/o access to "someuser" aclchg someuser -x "#,at,aclchg,acladd,acldel,quit" # don't allow these aclchg otheruser +rwx "#?" # enable r/w access to "otheruser" aclchg otheruser -x "#,at,aclchg,acladd,acldel,quit" # don't allow them to use these commands # ----- After doing this (once), you start your session with: $ screen Then, the other user can join your terminal session(s) with youruserid: $ screen -r youruserid/ Note: the trailing "/" is required. Multiple users can share the same screen simultaneously, each with independent access controlled precisely with "aclchg" in the ~/.screenrc file. I use the following setup: # ~/.screenrc-base # default screenrc on any host source $HOME/.screenrc-base source $HOME/.screenrc-$HOST source $HOME/.screenrc-users # ----- Then, the base configurations are in ~/.screenrc-base; the host-specific configurations are in ~/.screenrc-$HOST, and the user configurations are in ~/.screenrc-users. The host-specific .screenrc file might contain some host-specific screen commands; e.g.: # ~/.screen-myhost # ----- screen -t 'anywhere' /bin/tcsh screen -t 'anywhere1' /bin/tcsh # ---- The .screenrc-base contains: # ~/.screenrc-base ## I find typing ^a (Control-a) awkward. So I set the escape key to CTRL-j instead of a. escape ^Jj termcapinfo xterm* ti@:te@: autodetach on zombie kr verbose on multiuser on

Extract all 404 errors from your apache accesslog (prefix lines by occurrences number)

Clone all repos from a user with lynx

https://wuseman.github.io/wcloner/

Display email addresses that have been sent to by a postfix server since the last mail log rollover

This assumes your mail log is /var/log/mail.log

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

A simple X11 tea timer

wrapping the snippet in $( )& puts the whole thing in the background so you don't tie up your login session.

Create a visually twisted effect by alternating the direction of the "staples" effect vertically. The effect is achieved by moving odd-numbered lines from right to left and even-numbered lines from left to right.

The effect is achieved by moving odd-numbered lines from right to left and even-numbered lines from left to right. For odd-numbered lines (with an index j), the ((j + i) % 2 == 0) condition is satisfied. In this case, the line width is set to i, resulting in the line moving from left to right. For even-numbered lines, the ((j + i) % 2 == 0) condition is not satisfied. The line width is set to $(tput cols) - i, causing the line to move from right to left. This alternating direction of movement creates a twisted visual effect as the lines appear to move in opposite directions. The code runs in a continuous loop, repeatedly updating the lines with changing background colors. There is a slight pause of 0.05 seconds between each iteration to control the speed of the animation.

Print a monthly calendar with today's date highlighted

The cal command is handy, but sometimes you want to quickly see today's date highlighted. That's why I came up with this quick command. Much like http://www.commandlinefu.com/commands/view/1342/show-this-months-calendar-with-todays-date-highlighted but cleaner and more succinct.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by