Commands by totti (87)

  • Use matched data and some other as replacement data Show Sample Output


    0
    echo "abcde" | sed 's/./& /g'
    totti · 2011-08-26 16:54:26 7
  • Works on Laptops, Desktop having communication b/w UPS & CPU Show Sample Output


    0
    NotifyOnBATTERY () { while :; do on_ac_power||notify-send "Running on BATTERY"; sleep 1m; done }
    totti · 2011-08-26 11:54:16 7

  • 0
    for i in `seq -w 1 50`; do wget --continue \ http://commandline.org.uk/images/posts/animal/$i.jpg; done
    totti · 2011-08-19 20:06:16 5
  • Show all commands having the part known by you. Eg: apropos pdf | less Show Sample Output


    2
    apropos <part_rember> | less
    totti · 2011-08-19 19:34:57 6
  • fileName /path/to/file.ext quivalent to basename /path/to/file.ext Show Sample Output


    -1
    fileName() { echo "$1" | grep -o "[^/]*$"; }
    totti · 2011-08-19 18:16:22 3
  • eg: VBoxManage internalcommands createrawvmdk -filename ~/.VBox_sdc.vmdk -rawdisk /dev/sdc In order to start virtual box using block devices, ( Or to boot from it) run as ROOT sudo VirtualBox Then add & select the vmdk file as a device. At last Start the virtual box. - This cmd needs to run once for a device. - See command 8936 to run with out using ROOT power and easy handling of Virtual m/c


    0
    VBoxManage internalcommands createrawvmdk -filename [path/to/file/name.vmdk] -rawdisk /dev/[block_device]
    totti · 2011-08-19 14:26:22 8
  • Videos are found using their MIME type. Thus no need to for an extension for the video file. This is a efficent version of "jnash" cmd (4086). Thanks for jnash. This cmd will only show video files while his cmd show files having "video" anywhere in path. Show Sample Output


    1
    allVideos() { find ./ -type f -print0 | xargs -0 file -iNf - | grep ": video/" | cut -d: -f1; }
    totti · 2011-08-19 11:58:59 3
  • Find the usage of a switch with out searching through the entire man page. Usage: manswitch [cmd] [switch] Eg: manswitch grep silent ____________________________ In simple words man <cmd> | grep "\-<switch>" Eg: man grep | grep "\-o" This is not a standard method but works. Show Sample Output


    1
    manswitch() { man $1 | grep -A5 "^ *\-$2"; }
    totti · 2011-08-19 08:36:54 5
  • (separator = $IFS)


    2
    ps aux | sort -nk 6
    totti · 2011-08-16 11:04:45 3

  • 6
    curl -I -H "Accept-Encoding: gzip,deflate" http://example.org
    totti · 2011-08-16 10:32:01 4

  • 5
    watch -n 2 -d '/sbin/ifconfig eth0'
    totti · 2011-08-16 10:29:34 4
  • Usage: VBoxBlockBoot [Virtual_Machine] [Block_device] Eg: VBoxBlockBoot WinXP /dev/sdc In another words vm=usb; usb=sdc;sudo umount /dev/$usb* ; sudo chmod 777 /dev/$usb ; VBoxManage storageattach $vm --medium ~/raw-HD-4-VB/$usb.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm $vm Where vm --> Name of the virtual machine to start usb --> Block device to use. (/dev/sdc) This can used after setup up a boot loader on to my USB pen drive or HDD (After creating Live USB). Here root privilege is needed but not granted to Virtual Box. Thus we can access all our VM.( If we run VBox as root we can't access our VMs). Root privilege is used to - Unmount the storage device - Chmod to full access (777) Requirements:- 1. Device information file (rawvmdk file) created by the following command. Need to run only once. Not bad to run many. VBoxCreateRawDisk() { VBoxManage internalcommands createrawvmdk -filename ~/.rawHD4VB_`basename "$1"`.vmdk -rawdisk "$1"; } 2. Root privilege to umount & chmod 3. Real storage medium (ie /dev/*) (Non-virtual such as USB HD, pen drive, a partition) 4. A virtual m/c already available (here "usb") vm=usb; usb=sdc;sudo umount /dev/$usb* ; sudo chmod 777 /dev/$usb ; VBoxManage storageattach $vm --medium ~/raw-HD-4-VB/$usb.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm $vm VBoxBlockBoot() { sudo umount "$2"*; sudo chmod 777 "$2"; VBoxManage storageattach "$1" --medium ~/.rawHD4VB_`basename "$2"`.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm "$1"; } Show Sample Output


    0
    VBoxBlockBoot() { sudo umount "$2"*; sudo chmod 777 "$2"; VBoxManage storageattach "$1" --medium ~/.rawHD4VB_`basename "$2"`.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm "$1";}
    totti · 2011-07-29 13:04:19 4
  • ‹ First  < 2 3 4

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

Happy Days
AFAIR this is the wording ;)

du command without showing other mounted file systems

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Visit wikileaks.com
Who needs a DNS server

resume other user's screen session via su, without pty error
Normally, if you su to another user from root and try to resume that other user's screen session, you will get an error like "Cannot open your terminal '/dev/pts/0' - please check." This is because the other user doesn't have permission for root's pty. You can get around this by running a "script" session as the new user, before trying to resume the screen session. Note you will have to execute each of the three commands separately, not all on the same line as shown here. Credit: I found this at http://www.hjackson.org/blog/archives/2008/11/29/cannot-open-your-terminal-dev-pts-please-check.

Download SSL server certificate with opsnessl
Useful when we need to create new certificate for site when current one is near expiry. This downloaded cert can be used to provide organisational data directly to new cert. using below command. e.g. openssl x509 -x509toreq -in /tmp/example.com.cert -out example.com.csr -signkey example.com-key.pem

ssh to machine behind shared NAT
Useful to get network access to a machine behind shared IP NAT. Assumes you have an accessible jump host and physical console or drac/ilo/lom etc access to run the command. Run the command on the host behind NAT then ssh connect to your jump host on port 2222. That connection to the jump host will be forwarded to the hidden machine. Note: Some older versions of ssh do not acknowledge the bind address (0.0.0.0 in the example) and will only listen on the loopback address.

Get your external IP address without curl
Curl is not installed by default on many common distros anymore. wget always is :) $ wget -qO- ifconfig.me/ip

Null a file with sudo

power off system in X hours form the current time, here X=2


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: