Hide

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again.

Delete that bloated snippets file you've been using and share your personal repository with the world. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.


If you have a new feature suggestion or find a bug, please get in touch via http://commandlinefu.uservoice.com/

Get involved!

You can sign-in using OpenID credentials, or register a traditional username and password.

First-time OpenID users will be automatically assigned a username which can be changed after signing in.

Hide

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

Hide

News

2011-03-12 - Confoo 2011 presentation
Slides are available from the commandlinefu presentation at Confoo 2011: http://presentations.codeinthehole.com/confoo2011/
2011-01-04 - Moderation now required for new commands
To try and put and end to the spamming, new commands require moderation before they will appear on the site.
2010-12-27 - Apologies for not banning the trolls sooner
Have been away from the interwebs over Christmas. Will be more vigilant henceforth.
2010-09-24 - OAuth and pagination problems fixed
Apologies for the delay in getting Twitter's OAuth supported. Annoying pagination gremlin also fixed.
Hide

Tags

Hide

Functions

Commands tagged grep from sorted by
Terminal - Commands tagged grep - 336 results
egrep -v '(\t)?#.*|^$' /etc/apache2/sites-available/default
find . -name "*.[ch]" -exec grep -i /dev/null "search pharse" {} \;
2012-12-04 20:51:04
User: MikeGoerling
Functions: find grep
Tags: find grep
0

Old Sys5 system and SUN computers don't have the -H option. Adding /dev/null forces grep to use the multi-file output and report the file name.

ifconfig eth0 | grep HW | cut -d " " -f 11
systemd-analyze plot | curl -sF file1=@- http://ompldr.org/upload | grep -P -o "(?<=File:).*(http://ompldr.org/.*)\<\/a\>" | sed -r 's@.*(http://ompldr.org/\w{1,7}).*@\1@'
vim $(grep [REGULAR_EXPRESSION] -R * | cut -d":" -f1 | uniq)
for k in `git branch -r|awk '{print $1}'`;do echo -e `git show --pretty=format:"%Cgreen%ci_%C(blue)%c r_%Cred%cn_%Creset" $k|head -n 1`$k;done|sort -r|awk -F"_" '{printf("%s %17s %-22s %s\n",$1,$2,$3,$4)}'
brd = "! f() { for k in $(git branch $@ | sed 's/^..//; s/ .*//'); do echo "$(git log -1 --pretty='%Cgreen%ci %Cblue(%cr)%Creset ' $k) $k" ; done | sort -r; }; f"
2012-09-28 10:20:51
0

Add this line to your ~/.gitconfig for a git alias "git brd" (i.e., brd = (br)anch+(d)ate) which sorts branches by date. Allows you to pass in limited "git branch" options such as "-r" (remote) or "-a" (all). (Note: forum added "$" prefix to command; obviously in gitconfig there is no "$" prefix.)

for file in `svn st | awk '{print $2}'`; do svn revert $file; done
sudo apt-get remove $(dpkg -l|awk '/^ii linux-image-/{print $2}'|sed 's/linux-image-//'|awk -v v=`uname -r` 'v>$0'|sed 's/-generic*//'|awk '{printf("linux-headers-%s\nlinux-headers-%s-generic*\nlinux-image-%s-generic*\n",$0,$0,$0)}')
2012-08-15 10:02:12
User: mtron
Functions: awk sed sudo
3

Remove old kernels (*-generic and *-generic-pae) via apt-get on debian/ubuntu based systems. Tested on ubuntu 10.04 - 12.04.

egrep_escape() { echo "$1" |sed -re 's/([\\.*+?(|)^$[])/\\\1/g' -e 's/\{/[{]/g'; }
2012-08-02 16:54:43
User: regnarg
Functions: echo sed
Tags: grep escape
0

Use if you want to include untrusted literal strings in your grep regexes.

I use it to list all mounts below a directory:

dir=/mnt/gentoo; cat /proc/mounts |awk '{print $2}' |egrep "^$(egrep_escape "$dir")(/|$)"

/mnt/gentoo

/mnt/gentoo/proc

/mnt/gentoo/sys

/mnt/gentoo/dev

/mnt/gentoo/home

Works even if $dir contains dangerous characters (e.g. comes from a commandline argument).

egrep '.*(("STATUS)|("HEAD)).*' http_access.2012.07.18.log | awk '{sum+=$11; ++n} END {print "Tot="sum"("n")";print "Avg="sum/n}'
2012-07-27 12:18:29
User: fanchok
Functions: awk egrep
0

Depending on your Apache access log configuration you may have to change the sum+=$11 to previous or next awk token.

Beware, usually in access log last token is time of response in microseconds, penultimate token is size of response in bytes. You may use this command line to calculate sum and average of responses sizes.

You can also refine the egrep regexp to match specific HTTP requests.

sudo apt-get remove $(dpkg -l|awk '/^ii linux-image-/{print $2}'|sed 's/linux-image-//'|awk -v v=`uname -r` 'v>$0'|sed 's/-generic-pae//'|awk '{printf("linux-headers-%s\nlinux-headers-%s-generic*\nlinux-image-%s-generic*\n",$0,$0,$0)}')
grep -c "^$" filename
2012-06-26 17:43:17
User: ankush108
Functions: grep
Tags: grep count empty
0

This pattern matches empty lines in the file and -c gives the count

netstat -tn | grep :80 | awk '{print $5}'| grep -v ':80' | cut -f1 -d: |cut -f1,2,3 -d. | sort | uniq -c| sort -n
2012-06-26 08:29:37
User: krishnan
Functions: awk cut grep netstat sort uniq
0

cut -f1,2 - IP range 16

cut -f1,2,3 - IP range 24

cut -f1,2,3,4 - IP range 24

find /path/to/dir -type f -print0 | xargs -0 grep -l "foo"
tcpdump port http or port ftp or port smtp or port imap or port pop3 -l -A | egrep -i 'pass=|pwd=|log=|login=|user=|username=|pw=|passw=|passwd=|password=|pass:|user:|username:|password:|login:|pass |user ' --color=auto --line-buffered -B20
2012-06-18 19:27:54
User: jseidl
Functions: egrep ftp tcpdump
1

Simple TCPDUMP grepping for common unsafe protocols (HTTP, POP3, SMTP, FTP)

svn status | grep "^M" | while read entry; do file=`echo $entry | awk '{print $2}'`; echo $file; svn revert $file; done
2012-06-17 16:01:06
User: wsams
Functions: awk echo grep read
0

This command allows you to revert every modified file one-by-one in a while loop, but also after "echo $file;" you can do any sort of processing you might want to add before the revert happens.

grep -r -Z -l "<text>" . | xargs -0 echo rm
2012-06-14 08:09:46
User: limonte
Functions: echo grep xargs
Tags: grep
4

-r recursively

-Z zero byte after each file name instead of the usual newline

-l only filenames

ls -R | grep ":$" | sed -e 's/:$//' -e 's/[^-][^\/]*\//--/g' -e 's/^/ /' -e 's/-/|/'
mysqlbinlog <logfiles> | grep exec | grep end_log_pos | cut -d' ' -f2- | cut -d: -f-2 | uniq -c
2012-05-30 09:42:21
User: theist
Functions: cut exec grep uniq
1

shows number of mysql bin log events (which are mysql server events) per minute, useful to check stress times postmortem

mysqlbinlog <logfiles> | grep exec | grep end_log_pos | grep -v exec_time=0 | sed 's/^\(.*exec_time=\([0-9]\+\).*\)/\2 - \1 /' | sort -n
2012-05-30 09:38:02
User: theist
Functions: exec grep sed sort
0

Shows sorted by query time, the headers of mysqlbinlog entries. Then is easy to locate the heavier events on the raw log dump

cal 04 2012 | awk 'NF <= 7 { print $7 }' | grep -v "^$" | tail -1
2012-05-03 16:57:45
User: javidjamae
Functions: awk cal grep tail
-2

This is a little trickier than finding the last Sunday, because you know the last Sunday is in the first position of the last line. The trick is to use the NF less than or equal to 7 so it picks up all the lines then grep out any empty lines.

while true; do iptables -nvL > /tmp/now; diff -U0 /tmp/prev /tmp/now > /tmp/diff; clear; cat /tmp/diff; mv /tmp/now /tmp/prev; slee p 1; done
2012-04-15 00:02:33
Functions: cat diff iptables mv
0

this alternative shows the differences as they occur so that they are made plain

find ./src -type d -name "Entity" | xargs ls -A | cut -d . -f1 | sed 's_^_app/console doctrine:generate:entities YourOwnBundleName:_'
2012-04-11 21:28:02
User: renoirb
Functions: cut find ls sed xargs
0

When I do a major change in my entities, I want to find a way to find all my Entities names and create the commande for me.

So instead of doing ls src/Your/OwnBundle... and then do it manually, this helps a lot.