Commands using egrep sorted by votes

Commands using egrep (220)

sorted by

Equivalent to ifconfig -a in HPUX
This is sample output - yours may be different.
0

netstat -nr|egrep -v "Routing|Interface|lo0"|awk '{print $5}'|sort -u| while read l; do ifconfig $l ; echo " Station Addr: `lanscan -ia|grep "$l "|cut -d ' ' -f 1`" ; done

innominable · 2014-10-31 09:20:46 7
List only X byte files in the current directory

This will list all the files that are a gigabyte or larger in the current working directory. Change the G in the regex to be a M and you'll find all files that are a megabyte up to but not including a gigabyte. Show Sample Output
This is sample output - yours may be different.
```
1.8G	Desktop
4.9G	Documents
3.7G	Google Drive
1.4G	Library
 37G	VirtualBoxVMs
8.7G	src
```
0

du -hs * |egrep -i "^(\s?\d+\.?\d+G)"

krizzo · 2014-12-09 15:23:21 9
Show a config file without comments

This will remove all blank lines and lines that start with # to use for commented ines (irrespective of where the # starts in the line).
This is sample output - yours may be different.
0

egrep -v "^$|^.*#" file

greatp123 · 2015-01-01 18:53:18 14
Show drive names next to their full serial number (and disk info)

This is much easier to parse and do something else with (eg: automagically create ZFS vols) than anything else I've found. It also helps me keep track of which disks are which, for example, when I want to replace a disk, or image headers in different scenarios. Being able to match a disk to the kernels mapping of said drive the disks serial number is very helpful ls -l /dev/disk/by-id Normal `ls` command to list contents of /dev/disk/by-id grep -v "wwn-" Perform an inverse search - that is, only output non-matches to the pattern 'wwn-' egrep "[a-zA-Z]{3}$" A regex grep, looking for three letters and the end of a line (to filter out fluff) sed 's/\.\.\/\.\.\///' Utilize sed (stream editor) to remove all occurrences of "../../" sed -E 's/.*[0-9]{2}:[0-9]{2}\s//' Strip out all user and permission fluff. The -E option lets us use extended (modern) regex notation (larger control set) sed -E 's/->\ //' Strip out ascii arrows "-> " sort -k2 Sort the resulting information alphabetically, on column 2 (the disk letters) awk '{print $2,$1}' Swap the order of the columns so it's easier to read/utilize output from sed 's/\s/\t/' Replace the space between the two columns with a tab character, making the output more friendly For large ZFS pools, this made creating my vdevs immeasurably easy. By keeping track of which disks were in which slot (spreadsheet) via their serial numbers, I was able to then create my vols simply by copying and pasting the full output of the disk (not the letter) and pasting it into my command. Thereby allowing me to know exactly which disk, in which slot, was going into the vdev. Example command below. zpool create tank raidz2 -o ashift=12 ata-... ata-... ata-... ata-... ata-... ata-... Show Sample Output
This is sample output - yours may be different.
```
sda     ata-Samsung_SSD_840_PRO_Series_SERIALSERIAL
sdb     ata-WDC_WD30EFRX-INFOINFOINFO
sdc     ata-WDC_WD30EFRX-INFOINFOINFO
sdd     ata-WDC_WD30EFRX-INFOINFOINFO
sde     ata-WDC_WD30EFRX-INFOINFOINFO
sdf     ata-WDC_WD30EFRX-INFOINFOINFO
```
0

ls -l /dev/disk/by-id |grep -v "wwn-" |egrep "[a-zA-Z]{3}$" |sed 's/\.\.\/\.\.\///' |sed -E 's/.*[0-9]{2}:[0-9]{2}\s//' |sed -E 's/->\ //' |sort -k2 |awk '{print $2,$1}' |sed 's/\s/\t/'

lig0n · 2015-01-25 19:29:40 8
grep for 2 words existing on the same line

grep for 2 words existing on the same line
This is sample output - yours may be different.
0

egrep 'word1.*word2' --color /path/file.log |more

alissonf · 2015-04-28 15:09:45 9

How to capture ICAP headers with tcpdump

Human readable representation of the headers of an ICAP request, using tcpdump Show Sample Output

idodekov · 2015-05-29 12:58:27 9

List widescreen wallpapers in current dir

Checks if the aspect ratio is approximately 1.6 (16:10) or ~1.77777778 (16:9). Requires mpv_identify from mpv project https://github.com/mpv-player/mpv/blob/master/TOOLS/mpv_identify.sh (this replaces mplayer -identify, or midentify) Show Sample Output
This is sample output - yours may be different.
```
video_aspect=1.778646
video_aspect=1.777778
```
0

./mpv_identify.sh * | egrep '^video_aspect=1\.[67]'

Tatsh · 2015-09-29 05:47:07 11
Not able to data in tee on using dual command like: tail and grep
This is sample output - yours may be different.
0

tail -f log.txt | egrep --line-buffered 'WARN|ERROR' | tee filtered_output.txt

zarvis · 2015-09-29 11:12:52 9
checking if an IP is valid.
This is sample output - yours may be different.
0

echo $IP | egrep '^(([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$'

andregyn62 · 2015-10-19 18:06:32 11
Search for files with non-Unix line endings
This is sample output - yours may be different.
0

egrep -l $'\r'\$ *

swarzynski · 2015-11-19 10:57:47 11
Count relevant lines of shell code in a git repo

Uses git grep for speed, relies on a valid she-bang, ignores leading whitespace when stripping comments and blank lines Show Sample Output
This is sample output - yours may be different.
```
% egrep -v '^\s*($|#)' $(git grep -l '#!/bin/.*sh' *) | wc -l
14079
```
0

egrep -v '^\s*($|#)' $(git grep -l '#!/bin/.*sh' *) | wc -l

Natureshadow · 2016-02-15 11:15:48 15
Erase Logs / Cache
This is sample output - yours may be different.
0

bleachbit -l | egrep 'cache|log' | xargs bleachbit -c

renous · 2016-02-28 15:20:47 12
Btrfs: Find file names with checksum errors

debian kernel 4.4.6 Show Sample Output
This is sample output - yours may be different.
```
images/10000/vm-10000-disk-1.raw
images/8001/BUGBTRFS/vm-8001-disk-2.raw
images/9003/vm-9003-disk-2.raw.crash.btrfs
```
0

grep "checksum error at logical" /var/log/messages | egrep -o "[^ ]+$" | tr -d ')' | sort | uniq

andrefalgon · 2016-04-30 09:13:36 8
Calculate comment density of shell scripts in a directory

Show Sample Output
This is sample output - yours may be different.
```
7882 lines = 7576 sloc [96%] + 306 comments [3%]
```
0

dir=/rom; a=$(find $dir -name \*.sh -exec cat '{}' \; | egrep -cv '^[[:space:]]*#'); b=$(find $dir -name \*.sh -exec cat '{}' \; | egrep -c '^[[:space:]]*#'); echo $((a+b)) lines = ${a} sloc [$((a*100/(a+b)))%] + ${b} comments [$((b*100/(a+b)))%]

koniu · 2016-05-19 08:35:56 86
Extract binary from .text section (shellcode)

Extracts the binary from the .text section and escapes it. This puts it in a form ready to use in a program. Show Sample Output
This is sample output - yours may be different.
```
\x31\xd2\x31\xc9\xbb\xb4\x90\x04\x08\xb0\x05\xcd\x80\xb2\x10\xb9\xc4\x90\x04\x08\x89\xc3\xb0\x03\xcd\x80\x89\xdf\xb2\x10\xb9\xc4\x90\x04\x08\xb3\x01\xb0\x04\xcd\x80\x89\xfb\xb0\x06\xcd\x80\xb0\x01\xcd\x80
```
0

objdump -d -j .text ExeHere | grep -e '^ ' | tr '[[:space:]]' '\n' | egrep '^[[:alnum:]]{2}$' | xargs | sed 's/ /\\x/g' | sed -e 's/^/\\x/g'

keyboardsage · 2016-09-11 07:15:00 16
uncompress file that is compressed multiple times

Abort/Break with CTRL-C when no output is shown anymore (break while true loop). Show Sample Output
This is sample output - yours may be different.
```
bunzip2: Can't guess original name for error.log.0.bz2.0.bz2.0 -- using error.log.0.bz2.0.bz2.0.out
bunzip2: Can't guess original name for error.log.0.bz2.0.bz2.0.out -- using error.log.0.bz2.0.bz2.0.out.out
bunzip2: Can't guess original name for error.log.0.bz2.0.bz2.0.out.out -- using error.log.0.bz2.0.bz2.0.out.out.out
```
0

while true; do for bzipfile in $(file *|egrep bzip2|awk '{print $1'}|cut -d':' -f1); do bunzip2 $bzipfile; done; done

tapestreamer · 2016-12-12 16:12:18 15
Check spelling of word using regex

Runs on at least MacOS Sierra (in Bash) Show Sample Output
This is sample output - yours may be different.
```
compatibility
```
0

egrep "^compat.bility$" /usr/share/dict/words

demonzrulaz · 2017-02-24 05:20:40 17
Print file excluding comments and blank lines
This is sample output - yours may be different.
0

egrep -v '^$|^#' /etc/sysctl.conf

imjoseangel · 2017-04-17 20:23:09 24
Do mathematical operation on every line of a given file for the first value found to be replaced (other lines stay untouched)

The given file may contain any kind of characters. This is compatible for most simple mathematical operation. For the first number found, it will be replaced by the result of a factor operation of 1000. To change the filename or multiplactor or number regular expression, change the first fixed values. Show Sample Output
This is sample output - yours may be different.
```
For a given filename such as test.csv, a new filename new_test.csv will be created containing the new values after the math operation.
command source: cat test.csv
command output: cat new_test.csv
```
0

n=1000;f="test.csv";r='([0-9]+.{0,1}[0-9]*)';echo -n "" > new_${f};cat $f | while read l;do val=`echo $l | egrep -o $r` ; if [ ! -z $val ];then newval=`echo $val \* $n | bc -l`;l=`echo $l | sed "s/$val/$newval/"`;fi;echo $l >> new_${f};unset val;done

s333 · 2017-04-26 18:04:07 19
Cat without comment
This is sample output - yours may be different.
0

cat /etc/squid/squid.conf | egrep -v "(^#.*|^$)"

tofu00 · 2017-11-29 10:16:49 41
check virt is available
This is sample output - yours may be different.
0

egrep -c '(vmx|svm)' /proc/cpuinfo

aysadk · 2017-12-03 22:48:04 22
Sort installed package on ArchLinux from low to high
This is sample output - yours may be different.
0

pacman -Qi | egrep '^(Name|Installed)' | cut -f2 -d':' | paste - - | column -t | sort -nk 2 | grep MiB

tianyu · 2019-04-21 05:19:56 37
InnoDB related parameters
This is sample output - yours may be different.
0

mysqladmin variables | egrep '(innodb_log_file|innodb_data_file)'

shantanuo · 2020-02-19 10:24:52 75
Change Windows line endings to Unix version

https://www.howtogeek.com/771399/how-to-use-the-find-command-in-linux/
This is sample output - yours may be different.
0

find . -type f -regex '.*\.$cpp\|h$' -exec egrep -l $'\r'\$ {} \; | xargs dos2unix

swarzynski · 2022-08-02 09:28:38 1120
Extract raw URLs from a file
This is sample output - yours may be different.
-1

egrep -ie "<*HREF=(.*?)>" index.html | awk -F\" '{print $2}' | grep ://

wwest4 · 2009-02-05 17:51:14 22
‹ First < 5 6 7 8 9 >

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

diff two unsorted files without creating temporary files

bash/ksh subshell redirection (as file descriptors) used as input to diff

Rename files in batch

Grab IP address on machine with multiple interfaces

Instead of hard-coding in a check to scrape info from ifconfig based on a specific interface, do it in a more portable way. This works really well if you switch between wired, wireless, bluetooth or even VPN connections. You can get your current IP in a script (since it'll be something like tun0 instead of eth0 or wlan1). This uses a well known public ip address 8.8.8.8, but it doesn't actually connect to it, it just shows you the route it would take.

change ownership en masse of files owned by a specific user, including files and directories with spaces

In the example, uid 0 is root. foo:foo are the user:group you want to make owner and group. '.' is the "current directory and below." -print0 and -0 indicate that filenames and directories "are terminated by a null character instead of by whitespace."

Project your desktop using xrandr

HDMI-1 is the interface in the example, which can be obtained just by typing xrandr and surfing through the output. There are a hell lot of configurations that can be done but I prefer auto because it works in most cases. $ Lifesaver

Tail postfix current maillog and grep for "criteria"

Tail curren postfix maillog.

Change host name

With sed you can replace strings on the fly.

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Create multiple mp4 files using avidemux

Convert multiple files using avidemux. Version updated (thanks to the guys who helped me giving me hints about how to improve the command). Works with files whose name contains blank characters. One of the reasons why I love open source: everyone can take something "done" and improve it to make it better! If u have suggestions, please let me know.

convert doc to pdf

convert to pdf and many other formats and vise versa to get a list of supported formats, run $ unoconv --show

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using egrep

Commands using egrep (220) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using egrep (220)

sorted by