Commands using sudo (537)

  • Installs lamp on Ubuntu


    0
    sudo apt-get install lamp-server^ phpmyadmin
    imericurnot · 2012-11-15 01:08:00 10
  • Ettercap MITM


    0
    sudo ettercap -T -Q -M arp -i wlan0 // //
    jorgemendoza · 2012-11-20 23:42:53 14
  • Extract all archives from current folder, each archive in its own folder.

    Magic line will extract almost all possible archives from current folder in its own folders. Don't forget to change USER name in sudo command. sed is used to create names for folders from archive names w/o extension. You can test sed expression, used in this command: arg='war.lan.net' ; x=$(echo $arg|sed 's/\(.*\)\..*/\1/') ; echo $x If some archives can't be extracted, install packages: apt-get install p7zip-full p7zip-rar Hope this will save a lot of your time. Enjoy.


    0
    for ARG in * ; do sudo -u USER 7z x -o"$(echo $ARG|sed 's/\(.*\)\..*/\1/')" "$ARG" ; done
    n158 · 2012-12-31 19:47:24 7
  • Locate command for MAC OSX

    MAC OSX doesn't come with a locate command, This will do the same thing as the locate command on a typical Linux OS. Simply add it to your ~/.bash_profile


    0
    alias locate='if [ $((`date +%s`-`eval $(stat -s /var/db/locate.database); echo $st_mtime`)) -gt 3600 ]; then echo "locate: db is too old!">/dev/stderr; sudo /usr/libexec/locate.updatedb; fi; locate -i'
    jhyland87 · 2013-01-21 17:45:50 4
  • Create a package list for offline download


    0
    sudo apt-get <apt-get command and options> --print-uris -qq | sed -n "s/'\([^ ]\+\)' \([^ ]\+\) \([^ ]\+\) MD5Sum:\([^ ]\+\)/wget -c \1/p" > dowload_deb_list.txt
    totti · 2013-02-09 09:36:53 4
  • macports update


    0
    sudo port selfupdate ; echo '---------' ; sudo port upgrade outdated
    roozbeh · 2013-03-21 04:07:54 4
  • Rename your Raspberry Pi

    Your computer's name is raspberrypi and you want to rename it to pita1. This command will change both the hostname and the name used for netwrk communications.


    0
    sudo sed -i 's/raspberrypi/pita1/' /etc/hosts /etc/hostname; sudo reboot
    egeoffray · 2013-04-16 07:27:41 6
  • Installation Ksuperkey by one command in Kubuntu.

    Install Ksuperkey one command in Kubuntu. You must manually add ksuperkey to autostart in System Settings KDE.


    0
    sudo apt-get install git gcc make libx11-dev libxtst-dev pkg-config -y && git clone https://github.com/hanschen/ksuperkey.git && cd ksuperkey && make && sudo mv ksuperkey /usr/bin/ksuperkey && cd ~ && rm -rf ksuperkey
    FadeMind · 2013-04-17 07:12:46 6
  • Run skype using your GTK theme

    Replace default command in skype.desktop file.


    0
    sudo sed -i 's/Exec=skype %U/Exec=skype --disable-cleanlooks -style GTK %U/' /usr/share/applications/skype.desktop
    FadeMind · 2013-04-17 08:43:00 6
  • Information about RAM HW.

    Advanced information about RAM.


    0
    sudo dmidecode --type 17
    FadeMind · 2013-04-18 20:13:07 4
  • Wait the set time and then Power off

    wait a hour and 10 seconds to shutdown Show Sample Output


    0
    sudo shutdown -h <hour:minute>
    devlucas · 2013-04-19 18:54:38 26
  • Shutdown ubuntu


    0
    sudo shutdown -h now
    permanaj · 2013-04-23 02:34:48 5
  • Clear linux cache


    0
    sudo su; sync; echo 3 > /proc/sys/vm/drop_caches
    ab_simas · 2013-04-23 14:07:15 4
  • Create user


    0
    sudo useradd -U -m -s /bin/bash new_user
    monmo · 2013-04-29 06:32:49 7
  • Command used to sync arch ro manjaro mirrors

    Show Sample Output


    0
    sudo pacman-mirrors -g
    unixmonkey57489 · 2013-05-16 13:55:39 7
  • To install guest additions in arch or manjaro linux, run the following command:

    Here you have to choose the correct kernel number, for example linux38.


    0
    sudo pacman -S virtualbox-guest-utils
    unixmonkey57489 · 2013-05-16 14:39:38 14
  • View all file descriptors owned by a process

    Inner "ps...grep..." command searches for a process matching the specified . "lsof -p lists all file descriptors owned by . Includes open files, sockets, devices, etc... Show Sample Output


    0
    sudo lsof -p `sudo ps aux | grep -i neo4j | grep -v grep | awk '{ print $2 }'`
    andycunn · 2013-06-02 10:15:30 7
  • Show counts of messages in exim mail queue, grouped by recipient

    Counts of messages by recipient, with frozen messages excluded. Show Sample Output


    0
    sudo /usr/sbin/exim -bp | sed -n '/\*\*\* frozen \*\*\*/,+1!p' | awk '{print $1}' | tr -d [:blank:] | grep @ | sort | uniq -c | sort -n
    blueskin · 2013-06-04 10:49:14 8
  • List partition superblocks


    0
    sudo dumpe2fs /dev/sda1 | grep superblock
    rugina · 2013-06-25 08:48:49 182
  • Macports update and clean all packages


    0
    sudo port selfupdate && sudo port upgrade outdated && sudo port clean --all installed && sudo port -f uninstall inactive
    noah · 2013-06-26 01:12:33 10
  • Getting OpenPGP keys for Launchpad PPAs on Debian based systems from behind a firewall

    If you are an unlucky soul behind a corporate firewall you will likely find that downloading gpg keys is blocked. This is because the hkp protocol uses port 11371 by default to transfer the key. By adding "hkp://" to the beginning of the hostname and ":80" to the end you are asking gpg to try using port 80 to connect (less likely to be blocked by a firewall). This relies on the remote server answering to requests over port 80. Show Sample Output


    0
    sudo apt-key adv --keyserver hkp://keys.gnupg.net:80 --recv-keys [key to get here]
    phattmatt · 2013-07-23 08:29:40 7
  • make pretty the netstat output for listening services

    bit of a contrived example and playing to my OCD but nice for quick scripted output of listening ports which is sorted by port, ip address and protocol. Show Sample Output


    0
    sudo netstat -plntu --inet | sort -t: -k2,2n | sort --stable -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n | sort -s -t" " -k1,1
    thechile · 2013-08-13 09:21:26 8
  • Backup /etc directory

    Back up /etc directory with a name based on the current date and the hostname of the machine, then chown the file for the current user for use.


    0
    sudo tar -zcvf $(hostname)-etc-back-`date +%d`-`date +%m`-`date +%y`.tar.gz /etc && sudo chown $USER:$USER $(hostname)-etc-back*
    thanosme · 2013-08-18 12:49:11 19
  • Adding user to printer, after installing hp-lip (Debian)


    0
    sudo adduser [username] lp && sudo adduser [username] lpadmin && sudo hp-setup -i
    Romero · 2013-08-25 14:21:25 10
  • Install build dependencies for a given package

    Install all build dependencies for a given package Show Sample Output


    0
    sudo apt-get build-dep rhythmbox
    darlanalves · 2013-10-07 23:13:19 6
  • ‹ First  < 12 13 14 15 16 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Check the status of a network interface

Pipe STDOUT to vim
The hyphen tells vim to open from STDOUT - saves having to create temporary files.

Simple complete system backup excluding files or directories
You can exclude more system folders or individual files which are not necessary for the backup and can be recreated after the restore procedure, like /lost+found, /mnt, /media, /tmp, /usr ... Restoring the above backup procedure is as simple as becoming root and typing: $ tar zxpf backup.tgz -C / You can extract any file or directory out of the backup.tgz file for recovery, for instance, if you have a corrupt or mis-configured fstab file, you could simply issue the command: $ tar zxpf backup.tgz /ect/fstab -C / Other options: v add verbose option to see files processed A far safer solution is to restore the desired files under a different directory, and then compare, move, or update the files to their original locations afterward.

backup system over ssh, exlucde common dirs

calculate md5 sums for every file in a directory tree
an alternative

embed referred images in HTML files
in "a.html", find all images referred as relative URI in an HTML file by "src" attribute of "img" element, replace them with "data:" URI. This useful to create single HTML file holding all images in it, as a replacement of the IE-created .mht file format. The generated HTML works fine on every other browser except IE, as well as many HTML editors like kompozer, while the .mht format only works for IE, but not for every other browser. Compare to the KDE's own single-file-web-page format "war" format, which only opens correctly on KDE, the HTML file with "data:" URI is more universally supported. The above command have many bugs. My commandline-fu is too limited to fix them: 1. it assume all URLs are relative URIs, thus works in this case: $ but does not work in this case: $ This may not be a bug, as full URIs perhaps should be ignored in many use cases. 2. it only work for images whoes file name suffix is one of .jpg, .gif, .png, albeit images with .jpeg suffix and those without extension names at all are legal to HTML. 3. image file name is not allowed to contain "(" even though frequently used, as in "(copy of) my car.jpg". Besides, neither single nor double quotes are allowed. 4. There is infact a big flaw in this, file names are actually used as regular expression to be replaced with base64 encoded content. This cause the script to fail in many other cases. Example: 'D:\images\logo.png', where backward slash have different meaning in regular expression. I don't know how to fix this. I don't know any command that can do full text (no regular expression) replacement the way basic editors like gedit does. 5. The original a.html are not preserved, so a user should make a copy first in case things go wrong.

Detect illegal access to kernel space, potentially useful for Meltdown detection
Based on capsule8 agent examples, not rigorously tested

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

New Maintainer for CommandLineFu
Welcome to Jon H. (@fart), the new maintainer of CommandLineFu. . In the absence of a forum, I encourage people welcome him, here, in the comments. . Also... What would you like to improve/change about the site?

extracts 64 bytes of random digits from random lines out of /dev/random sent to stdio
Use this the next time you need to come up with a reasonably random bitstring, like for a WPA/WPA2 PSK or something. Takes a continuous stream of bytes coming from /dev/urandom, runs it through od(1), picking a random field ($0 and $1 excluded) from a random line and then prints it.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: