Commands using tar sorted by votes

Commands using tar (226)

sorted by

Install unrar on Linux box from sources
This is sample output - yours may be different.
0

cd /usr/src ; wget http://www.rarlab.com/rar/unrarsrc-4.0.2.tar.gz ; tar xvfz unrarsrc-4.0.2.tar.gz ; cd unrar ; ln -s makefile.unix Makefile ; make clean ; make ; make install

yababay · 2010-12-09 10:35:28 6
Backup to tape, rewind and check md5

Backups $DIR_TO_BACKUP into tape, creating on the fly a MD5SUM file of the backup. Then rewinds one record on tape and checks if it's well written.
This is sample output - yours may be different.
0

tar -cvf - $DIR_TO_BACKUP | tee >(md5sum > backup_md5.txt) > /dev/st0 && mt -f /dev/nst0 bsfm 1 && md5sum -c backup_md5.txt < /dev/st0

bugmenot · 2011-01-27 20:57:36 4
Create a tar of modified/added files since revision 1792.

The result of this command is a tar with all files that have been modified/added since revision 1792 until HEAD. This command is super useful for incremental releases.
This is sample output - yours may be different.
0

svn diff -r 1792:HEAD --summarize | awk '{if ($1 != "D") print $2}'| xargs -I {} tar rf incremental_release.tar {}

windfold · 2011-04-05 15:00:49 3
have tar decide compression based on filename

the -a flag causes tar to automatically pick the right compressor to filter the archive through, based on the file extension. e.g. "tar -xaf archive.tar.xz" is equivalent to "tar -xJf archive.tar.xz" "tar -xaf archive.tar.gz" is equivalent to "tar -xzf archive.tar.gz" No need to remember -z is gzip, -j is bzip2, -Z is .Z, -J is xz, and so on :)
This is sample output - yours may be different.
0

tar -caf some_dir.tar.xz some_dir

thetrivialstuff · 2011-06-09 19:00:06 3
Decompress all .tar.gz files and remove the compressed .tar.gz
This is sample output - yours may be different.
0

for i in *.tar.gz; do tar -x -v -z -f $i && rm -v $i; done

Nichlas · 2011-06-25 20:40:44 3
tar's and moves all contents of current directory to target dir
This is sample output - yours may be different.
0

tar cf - . |(cd /targetdir; tar xvf -)

jamomu · 2011-07-13 05:03:58 3
Backup entire system

Backup your entire system on a tar ball file format.
This is sample output - yours may be different.
0

cd / ; tar -cvpzf backup.tar.gz --exclude=/backup.tar.gz --exclude=/proc --exclude=/lost+found --exclude=/sys --exclude=/mnt --exclude=/media --exclude=/dev /

strzel_a · 2011-07-20 15:44:07 5
Archive tar.gz archives all files (with extension filter) individually from an location

This command will : -Archive all *.dmp files individually (one file per archive) from current directory . -Delete original file after has been compressed.
This is sample output - yours may be different.
0

find ./ -iname "*.dmp" -maxdepth 0 -type f -exec tar czvf {}.tar.gz --remove-files {} \; \;

evilinside · 2011-09-07 08:36:29 3
Tar Pipe

Simple tar pipe to be used to copy directories while including hidden files and maintaining file permissions
This is sample output - yours may be different.
0

(cd src && tar -cf - .) | (cd dest && tar -xpf -)

Cowboy · 2011-09-22 11:30:57 62
Create tarball of files modified in git
This is sample output - yours may be different.
0

tar czf git_mods_circa_dec23.tgz --files-from <(git ls-files -m)

jemptymethod · 2011-12-23 15:31:21 4
Extract remote gzip tarball
This is sample output - yours may be different.
0

ssh user@remote "cat /path/to/archive.tgz" | tar zxvf -

maxmanders · 2012-04-04 13:05:23 3
backup your file with tar and exclude the file or directory which you don't want
This is sample output - yours may be different.
0

tar zcvf /path/to/your-`date +%Y-%m-%d`.tar.bz2 ./your/directory --exclude ./you/dont/want/to/include

liushuililuo · 2012-04-10 01:28:36 3
Create rsyncable tar archives with gzip compression
This is sample output - yours may be different.
0

GZIP="--rsyncable" tar -czf something.tgz /something

dash · 2012-04-24 19:06:56 4
Backup hidden files and folders in home directory

This will make a backup of all hidden files and folders in the home folder.
This is sample output - yours may be different.
0

tar zcpvf backup.tgz $(find $HOME -maxdepth 1 -name '.*' -and -not -name '.')

DavidAlfonso · 2012-05-01 17:48:24 19
Tar all files in a folder including hidden dot files
This is sample output - yours may be different.
0

tar -zcvf file.tgz ./

alairock · 2012-07-31 17:13:42 6
netcat - send tar archive remotely (sending side)

Tar's up $DIR locally (w/bzip2) and sends remotely to $HOST:$PORT where netcat listens (using openbsd netcat). Start up receiving side command first, then execute this.
This is sample output - yours may be different.
0

tar -cjf - $DIR | nc $HOST $PORT

taintedkernel · 2012-11-13 16:44:26 5
Tar dir excluding tmp
This is sample output - yours may be different.
0

tar -zcvf <archive<.tar.gz --exclude /home/szimbaro/tmp /home/szimbaro

szimbaro · 2013-02-27 13:47:59 4
Download and extract a tarball on a fly, saving it

Very similar as doing "wget http://example.com/mytarball|tar xzv", this one involves the "tee" command between both, which will simultaneously write the tarball and copy it to stdout. So this command will locally save the tarball and extract it - both at the same time while it downloads.
This is sample output - yours may be different.
0

wget -O- http://example.com/mytarball.tgz | tee mytarball.tgz | tar xzv

unixmonkey48888 · 2013-03-06 11:11:28 4
Encrypt directory with GnuPG and tar

Decrypt with: gpg -o- foo.tgz.gpg | tar zxvf -
This is sample output - yours may be different.
0

tar zcf - foo | gpg -c --cipher-algo aes256 -o foo.tgz.gpg

skkzsh · 2013-03-13 09:44:39 5
tar xz maximal compression

is preserving creation time, modification time, permission, the directory structure, etc. Show Sample Output
This is sample output - yours may be different.
```
tarfile.tar.xz
```
0

XZ_OPT=-9 tar cJf tarfile.tar.xz directory

unixmonkey51864 · 2013-03-30 06:00:39 7
create tar.gz on solaris
This is sample output - yours may be different.
0

tar cfp - file-to-be-archived | gzip > archive.tar.gz

vaaclav · 2013-04-30 08:06:16 7
encrypt, split and get ready for dvd a large file via tar and ccrypt
This is sample output - yours may be different.
0

tar czf - /directory/to/tar | ccrypt -k yourpassword | split -b50m - /final/encrypted.cpt

symgryph · 2013-05-10 12:42:47 6
Put files back together after encrypted with tar and ccrypt
This is sample output - yours may be different.
0

cat file.gz.cpt *[a-z] | ccdecrypt -k yoursecretpassword | tar -xzf -

symgryph · 2013-05-10 12:44:12 9
Copy with TAR PV and NC

Do above at the Destination aka The Server. Do the following at the Source aka The Client: tar -cf - /srcfolder | pv | nc www.home.com 50002 If you want ETAs and stuff: tar -cf - /srcfolder | pv -s `du -sb /srcfolder | awk '{print $1}'` | nc www.home.com 50002 If you dont care about progress bars @ server/destination: tar -cf - /srcfolder | pv | nc www.home.com 50002 If you dont care about progress bars @ client/source: tar -cf - /srcfolder | pv -s `du -sb /srcfolder | awk '{print $1}'` | nc www.home.com 50002 I have this in alot better detail where there is more room to talk about it on my site: http://www.kossboss.com/linuxtarpvncssh Show Sample Output
This is sample output - yours may be different.
```
Do above at the Destination aka The Server.
Do the following at the Source aka The Client:
tar -cf - /srcfolder | pv | nc www.home.com 50002

If you want ETAs and stuff:
tar -cf - /srcfolder | pv -s `du -sb /srcfolder | awk '{print $1}'` | nc www.home.com 50002

If you dont care about progress bars @ server/destination:
tar -cf - /srcfolder | pv | nc www.home.com 50002
If you dont care about progress bars @ client/source:
tar -cf - /srcfolder | pv -s `du -sb /srcfolder | awk '{print $1}'` | nc www.home.com 50002

I have this in alot better detail where there is more room to talk about it on my site:
http://www.kossboss.com/linuxtarpvncssh
```
0

while true; do nc -l -p 50002 | pv | tar -xf -; done

bhbmaster · 2013-05-30 07:17:23 10
SSH folder with progress bar and faster encryption with compression

NOTE: When doing these commands when asked for questions there might be flowing text from the pv doing the progress bar just continue typing as if its not there, close your eyes if it helps, there might be a yes or no question, type "yes" and ENTER to it, and also it will ask for a password, just put in your password and ENTER I talk alot more about this and alot of other variations of this command on my site: http://www.kossboss.com/linuxtarpvncssh Show Sample Output
This is sample output - yours may be different.
```
NOTE: When doing these commands when asked for questions there might be flowing text from the pv doing the progress bar just continue typing as if its not there, close your eyes if it helps, there might be a yes or no question, type "yes" and ENTER to it, and also it will ask for a password, just put in your password and ENTER

I talk alot more about this and alot of other variations of this command on my site:
http://www.kossboss.com/linuxtarpvncssh
```
0

cd /srcfolder; tar -czf - . | pv -s `du -sb . | awk '{print $1}'` | ssh -c arcfour,blowfish-cbc -p 50005 root@destination.com "tar -xzvf - -C /dstfolder"

bhbmaster · 2013-05-30 07:21:06 7
‹ First < 4 5 6 7 8 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Create a backup of the file.

It will create a backup of the filename. The advantage is that if you list the folder the backups will be sorted by date. The command works on any unix in bash.

Remove newlines from output

Pipe any output to "grep ." and blank lines will not be printed.

List top 10 files in filesystem or mount point bigger than 200MB

Specify the size in bytes using the 'c' option for the -size flag. The + sign reads as "bigger than". Then execute du on the list; sort in reverse mode and show the first 10 occurrences.

Advanced LS Output using Find for Formatted/Sortable File Stat info

I love this function because it tells me everything I want to know about files, more than stat, more than ls. It's very useful and infinitely expandable. $ find $PWD -maxdepth 1 -printf '%.5m %10M %#9u:%-9g %#5U:%-5G [%AD | %TD | %CD] [%Y] %p\n' | sort -rgbS 50% 00761 drwxrw---x askapache:askapache 777:666 [06/10/10 | 06/10/10 | 06/10/10] [d] /web/cg/tmp The key is: # -printf '%.5m %10M %#9u:%-9g %#5U:%-5G [%AD | %TD | %CD] [%Y] %p\n' which believe it or not took me hundreds of tweaking before I was happy with the output. You can easily use this within a function to do whatever you want.. This simple function works recursively if you call it with -r as an argument, and sorts by file permissions. $ lsl(){ O="-maxdepth 1";sed -n '/-r/!Q1'

Convert a MOV captured from a digital camera to a smaller AVI

Convert those .mov files that your digital camera makes to .avi Adjust the bitrate (-b) to get the appropriate file size. A larger bitrate produces a larger (higher quality) .avi file and smaller bitrate produces a smaller (lower quality) .avi file. Requires ffmpeg (see man page for details) (tested with canon camera MOV files) Other examples: $ffmpeg -i input.mov -sameq -vcodec msmpeg4v2 -acodec pcm_u8 output.avi $ffmpeg -i input.mov -b 1024k -vcodec msmpeg4v2 -acodec pcm_u8 output.avi

Export all Mailman mailing lists Members to separate .txt files

Export all Mailman mailing lists Members to separate .txt files excluding "Mailman" and "Test" or add yours by && $1!="myDontWannaList"

Share your terminal session real-time

One person does `mkfifo foo; script -f foo' and another can supervise real-time what is being done using `cat foo'.

Replace all forward slashes with backward slashes

Use -i option to edit directly a file: sed -i 's|\/|\\|g' file

Show the command line for a PID with ps

Hide or show Desktop Icons on MacOS

Hides all Files and Folders on the MacOS Desktop. To show files and folders, type "true" instead of "false". "Finder" at the end is case sensitive, "finder" doesn’t work

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using tar

Commands using tar (226) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using tar (226)

sorted by