Commands using watch (155)

  • Maybe this will help you to monitor your load balancers or reverse proxies if you happen to use them. This is useful to discover TIME OUTS and this will let you know if one or more of your application servers is not connected by checking. Show Sample Output


    2
    watch -n 1 "/usr/sbin/lsof -p PID |awk '/TCP/{split(\$8,A,\":\"); split(A[2],B,\">\") ; split(B[1],C,\"-\"); print A[1],C[1],B[2], \$9}' | sort | uniq -c"
    ideivid · 2011-08-12 19:16:38 3
  • In certain cases you mighy need to monitor the server load caused by certain process. For example HTTP, while stress testing apache using ab (apache benchmark) you may want to monitor the server status,load, # of spawned HTTP processes, # of established connections, # of connections in close wait state, apache memory footprint etc. Show Sample Output


    2
    watch -n1 "uptime && ps auxw|grep http|grep -v grep | grep -v watch|wc -l && netstat -ntup|grep :80 |grep ESTABLISHED|wc -l && netstat -ntup|grep :80|grep WAIT|wc -l && free -mo && ps -ylC httpd --sort:rss|tail -3|awk '{print \$8}'"
    rockon · 2012-06-06 12:12:10 5
  • This handles when you have a single call or channel. Other commands will strip out the result if there is a single channel or call active because the output changes the noun to be singular instead of plural. Show Sample Output


    2
    watch "asterisk -vvvvvrx 'core show channels' | egrep \"(call|channel)\""
    rowshi · 2012-08-29 13:40:45 5
  • Sends the "USR1" signal every 1 second (-n 1) to a process called exactly "dd". The signal in some systems can be INFO or SIGINFO ... look at the signals list in: man kill


    2
    watch -n 1 pkill -USR1 "^dd$"
    ivanalejandro0 · 2012-08-31 05:15:45 4
  • Sometimes top/htop don't give the fine-grained detail on memory usage you might need. Sum up the exact memory types you want


    2
    watch "awk '/Rss/{sum += \$2; } END{print sum, \"kB\"}' < /proc/$(pidof firefox)/smaps"
    gumnos · 2015-09-19 00:36:34 18

  • 2
    watch grep \"cpu MHz\" /proc/cpuinfo
    wuseman1 · 2018-11-11 00:45:28 419

  • 2
    $ watch -c "netstat -natp 2>/dev/null | tail -n +3 | awk '{print \$6}' | sort | uniq -c"
    emanuele · 2018-11-22 10:37:48 330

  • 2
    watch ss -stplu
    wuseman1 · 2019-07-16 20:41:36 43
  • Use the command watch, which is really hard to pass nested quotes to, and insert newlines where they are supposed to go in the HTTP request. that is after 1.1 after the host and two newlines at the end before the EOF. i use this all day what? no support for HEREDOCs on commandlinefu's interface? need more fu. Show Sample Output


    1
    watch -n 1 nc localhost 80 '<<EOF GET / HTTP/1.1 Host: tux-ninja Connection: Close EOF'
    JustinHop · 2009-08-06 23:20:31 4
  • If you're like some individuals who rely on ndiswrapper and cannot use kismet, this command may be of service. watch -n .5 "iwlist wlan0 scan | egrep 'ESSID|Encryption'" Or... watch -n .5 "iwlist wlan0 scan | egrep 'ESSID|Encryption' | egrep 'linksys'" :-) Hopefully you'll find some dd-wrt compatible routers.


    1
    watch -n .5 "iwlist wlan0 scan"
    Abiden · 2009-08-20 23:05:04 3
  • If you need to keep an eye on a command whose output is changing, use the watch command. For example, to keep an eye on your load average


    1
    watch 'cat /proc/loadavg'
    0disse0 · 2009-09-03 20:10:46 4
  • This time I added a print to reemaining energy, every minute, time stamped. The example shown here is complete and point to large discrepancies as time passes, converging to accuracy near the end. Show Sample Output


    1
    echo start > battery.txt; watch -n 60 'date >> battery.txt ; acpi -b >> battery.txt'
    m33600 · 2009-10-19 05:28:15 4

  • 1
    watch -n 60 du /var/log/messages
    rbossy · 2009-10-27 14:53:41 3
  • If you just executed some long command, like "ps -aefww | grep -i [m]yProcess", and if you don't want to retype it or cycle backwards in history and waste time quoting it, then you can use history substitution.


    1
    watch -n1 -d !!
    TeacherTiger · 2009-11-24 21:01:14 3

  • 1
    watch -n 1 -d "finger"
    tsiqueira · 2009-12-08 14:53:18 3
  • To monitor .vmdk files during snapshot deletion (commit) on ESX only (ESXi doesn't have the watch command): 1. Navigate to the VM directory containing .vmdk files. # watch "ls -tough --full-time *.vmdk" where: -t sorts by modification time -o do not list group information (to narrow the output) -u sorts by access time -g only here for the purpose to easily remember the created mnemonic word 'tough' -h prints sizes in human readable format (e.g., 1K 234M 2G) --full-time sets the time style to full-iso and does not list user information (to narrow the output) optionally useful parameters to the watch command: -d highlight changes between updates -n seconds to wait between updates (default is 2) -t turn off printing the header


    1
    watch 'ls -tough --full-time *.vmdk'
    vRobM · 2010-08-20 17:28:28 6
  • Note: 1) -n option of watch accepts seconds 2) -t option of notify-send accepts milliseconds 3) All quotes stated in the given example are required if notification message is more than a word. 4) I couldn't get this to run in background (use of & at the end fails). Any suggestions/improvements welcome.


    1
    watch -n 900 "notify-send -t 10000 'Look away. Rest your eyes'"
    b_t · 2010-10-05 09:39:31 6
  • Great for watching things like Maildir's or any other queue directory.


    1
    watch "cat `ls -rcA1 | tail -n1`"
    donnoman · 2011-03-25 01:22:05 8

  • 1
    watch !!
    wincus · 2011-07-05 12:50:56 7
  • If you add the -d flag each difference in the command's output will be highlighted. I also monitor individual drives by adding them to df. Makes for a nice thin status line that I can shove to the bottom of the monitor.


    1
    watch -d -n 5 df
    pcphillips · 2011-08-24 19:45:36 6

  • 1
    watch -n 1 "netstat -ntu | sed '1,2d' | awk '{ print \$6 }' | sort | uniq -c | sort -k 2"
    facecool · 2011-09-30 09:04:14 3

  • 1
    watch -t -c -n30 'wget -q -O- "http://wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=1Z4WYXXXXXXXXXX" | html2text | sed -n "/Shipment Progress/,/Shipping Information/p" | grep -v "*" | ccze -A'
    mfr · 2013-06-20 06:01:25 15
  • Starts and shows a timer. banner command is a part of the sysvbanner package. Instead of the banner an echo or figlet commands could be used. Stop the timer with Ctrl-C and elapsed time will be shown as the result. Show Sample Output


    1
    alias timer='export ts=$(date +%s);p='\''$(date -u -d @"$(($(date +%s)-$ts))" +"%H.%M.%S")'\'';watch -n 1 -t banner $p;eval "echo $p"'
    ichbins · 2013-08-24 16:18:45 13
  • Like top, but for files


    1
    watch -d -n 2 'df; ls -FlAt;'
    G2G · 2013-09-17 05:44:47 6
  • Watch a dig in progress Show Sample Output


    1
    watch -n1 dig google.com
    ene2002 · 2013-12-26 19:23:27 13
  •  < 1 2 3 4 5 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

tail -f a log file over ssh into growl

dump database from postgresql to a file

Lists all usernames in alphabetical order

Keep a copy of the raw Youtube FLV,MP4,etc stored in /tmp/
Certain Flash video players (e.g. Youtube) write their video streams to disk in /tmp/ , but the files are unlinked. i.e. the player creates the file and then immediately deletes the filename (unlinking files in this way makes it hard to find them, and/or ensures their cleanup if the browser or plugin should crash etc.) But as long as the flash plugin's process runs, a file descriptor remains in its /proc/ hierarchy, from which we (and the player) still have access to the file. The method above worked nicely for me when I had 50 tabs open with Youtube videos and didn't want to have to re-download them all with some tool.

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Change the homepage of Firefox
Pros: Works in all Windows computers, most updated and compatible command. Cons: 3 liner Replace fcisolutions.com with your site name.

Copy without overwriting

Fast, built-in pipe-based data sink
This is shorter and actually much faster than >/dev/null (see sample output for timings) Plus, it looks like a disappointed face emoticon.

bash screensaver off

return the latest kernel version from a Satellite / Spacewalk server software channel


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: