All commands (13,003)


  • 5
    unrar p -inul foo.rar|mplayer -
    dezza · 2009-06-19 22:40:01 0
  • The option -an disables audio recording, -f forces the use of video4linux for the input, -s sets the video to the size 320x240, -b sets the recording bitrate, -r sets the frame rate to 15fps, -i gives the input device, -vcodec sets the output format. Press Q to stop recording or you can specify the recording time with the -t option like -t 00:1:30


    3
    ffmpeg -an -f video4linux -s 320x240 -b 800k -r 15 -i /dev/v4l/video0 -vcodec mpeg4 myvideo.avi
    dcabanis · 2009-06-19 17:41:43 2
  • Encode video.avi into newvideo.avi using the libav codec to produce an MPEG4 file with a bitrate of 800


    1
    mencoder video.avi lavc -lavcopts vcodec=mpeg4:vbitrate=800 newvideo.avi
    dcabanis · 2009-06-19 17:30:46 1
  • video.avi is the resulting file. Press Ctrl+c to stop the recording. You can change the OVC option to another to record into a different format.


    1
    mencoder -tv device=/dev/video1 tv:// -ovc copy -o video.avi
    dcabanis · 2009-06-19 17:21:33 0
  • GNU Sed can 'address' between two regex, but it continues parsing through to the end of the file. This slight alteration causes it to terminate reading the input file once the STOP match is made. In my example I have included an extra '/START/d' as my 'start' marker line contains the 'stop' string (I'm extracting data between 'resets' and using the time stamp as the 'start'). My previous coding using grep is slightly faster near the end of the file, but overall (extracting all the reset cycles in turn) the new SED method is quicker and a lot neater. Show Sample Output


    3
    sed -n '/START/,${/STOP/q;p}'
    mungewell · 2009-06-19 15:27:36 1

  • -5
    ga
    miccaman · 2009-06-19 12:20:10 0
  • insert filename Normal mode: "%p Insert mode: %


    1
    :r! echo %
    miccaman · 2009-06-19 12:17:28 3
  • src: daily vim blog


    3
    :source ~/.vimrc
    miccaman · 2009-06-19 12:14:55 0

  • 2
    :set nomore :argdo %s/foo/bar/g | update
    miccaman · 2009-06-19 12:12:33 0
  • will show: installed linux headers, image, or modules: /^ii/!d avoiding current kernel: /'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d only application names: s/^[^ ]* [^ ]* \([^ ]*\).*/\1/ avoiding stuff without a version number: /[0-9]/!d Show Sample Output


    4
    dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d'
    plasticdoc · 2009-06-19 10:23:38 1
  • will purge: only installed apps: /^ii/!d avoiding current kernel stuff: /'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d using app names: s/^[^ ]* [^ ]* \([^ ]*\).*/\1/ avoiding stuff without a version number: /[0-9]/!d


    7
    dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' | xargs sudo apt-get -y purge
    plasticdoc · 2009-06-19 10:11:00 0
  • This commands will make it easier to select only common items between two files being compared. If your lines start with things other than lowercase a-z, adjust this Regex appropriately. Number of lines in the output has been set to no more than 10000, and should be adjusted as needed.


    -1
    gdiff --unified=10000 input.file1 inpute.file2 | egrep -v "(^\+[a-z]|^\-[a-z])"| sort > outputfile.sorted
    slashdot · 2009-06-18 20:35:00 3
  • Stuck behind a restrictive firewall at work, but really jonesing to putty home to your linux box for some colossal cave? Goodness knows I was...but the firewall at work blocked all outbound connections except for ports 80 and 443. (Those were wide open for outbound connections.) So now I putty over port 443 and have my linux box redirect it to port 22 (the SSH port) before it routes it internally. So, my specific command would be: iptables -t nat -A PREROUTING -p tcp --dport 443 -j REDIRECT --to-ports 22 Note that I use -A to append this command to the end of the chain. You could replace that with -I to insert it at the beginning (or at a specific rulenum). My linux box is running slackware, with a kernel from circa 2001. Hopefully the mechanics of iptables haven't changed since then. The command is untested under any other distros or less outdated kernels. Of course, the command should be easy enough to adapt to whatever service on your linux box you're trying to reach by changing the numbers (and possibly changing tcp to udp, or whatever). Between putty and psftp, however, I'm good to go for hours of time-killing.


    9
    iptables -t nat -A PREROUTING -p tcp --dport [port of your choosing] -j REDIRECT --to-ports 22
    brizznown · 2009-06-18 17:38:59 3
  • additionally use "find /etc/cron*" for cronscripts Show Sample Output


    1
    cut -d: -f1 /etc/passwd | grep -vE "#" | xargs -i{} crontab -u {} -l
    hoberion · 2009-06-18 16:49:52 2
  • Sometimes you're trying to read through an xml file to determine whats wrong with it and a tool had removed all the linebreaks. xmllint will go ahead and make it pretty for you.


    4
    xmllint --format <filename> > <output file>
    topperge · 2009-06-18 15:00:30 0

  • 0
    shred -vzu /tmp/junk-file-to-be-shredded
    mpb · 2009-06-18 12:00:19 2
  • imports a public key from the web. I know this by head.. but useful nevertheless Show Sample Output


    2
    curl -s http://defekt.nl/~jelle/pubkey.asc | gpg --import
    wires · 2009-06-18 11:26:03 0
  • Appended to grub boot parameters ... gives shell ... password recovery


    2
    init=/bin/bash; mount -o remount,rw /
    m03hr3 · 2009-06-18 08:51:24 0
  • I had some trouble removing empty lines from a file (perhaps due to utf-8, as it's the source of all evil), \W did the trick eventually.


    0
    grep -v "^\W$" <filename>
    nikc · 2009-06-18 08:17:22 2

  • 2
    find directory -size +nnn
    miccaman · 2009-06-18 06:55:00 0

  • 1
    ls -s | sort -nr | more
    miccaman · 2009-06-18 06:44:01 3
  • Starts midnightcommander and allows you to detach the console; use ctrl-\ to detach Then at a later time you can reconnect using dtach -a /tmp/wires-mc In my experience dtach works much better for programs like irssi, mutt, mc, aptitude than screen does.


    5
    dtach -c /tmp/wires-mc mc
    wires · 2009-06-17 22:18:25 4
  • search the newest *.jpg in the directory an make a copy to newest.jpg. Just change the extension to search other files. This is usefull eg. if your webcam saves all pictures in a folder and you like the put the last one on your homepage. This works even in a directory with 10000 pictures.


    1
    cp `ls -x1tr *.jpg | tail -n 1` newest.jpg
    Psychodad · 2009-06-17 20:32:04 3
  • Using the grep command, retrieve all lines from any log files in /var/log/ that have one of the problem states


    6
    grep -2 -iIr "err\|warn\|fail\|crit" /var/log/*
    miketheman · 2009-06-17 19:41:04 2
  • This will create a 10 MB file named testfile.txt. Change the count parameter to change the size of the file. As one commenter pointed out, yes /dev/random can be used, but the content doesn't matter if you just need a file of a specific size for testing purposes, which is why I used /dev/zero. The file size is what matters, not the content. It's 10 MB either way. "Random" just referred to "any file - content not specific" Show Sample Output


    1
    dd if=/dev/zero of=testfile.txt bs=1M count=10
    mstoecker · 2009-06-17 17:06:16 7
  • ‹ First  < 436 437 438 439 440 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands



Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: