All commands (14,187)

  • I must monitorize a couple of ftp servers every morning WITHOUT a port-scanner Instead of ftp'ing on 100 ftp servers manually to test their status I use this loop. It might be adaptable to other services, however it may require a 'logout' string instead of 'quit'. The file ftps.txt contains the full list of ftp servers to monitorize.


    1
    for host in $(cat ftps.txt) ; do if echo -en "o $host 21\nquit\n" |telnet 2>/dev/null |grep -v 'Connected to' >/dev/null; then echo -en "FTP $host KO\n"; fi done
    vlan7 · 2010-01-26 15:34:18 3
  • Recursive grep through directory for file.


    -5
    find directory/ |xargs grep -i "phrase"
    tuxtutorials · 2010-01-26 14:56:56 3
  • no loop, only one call of grep, scrollable ("less is more", more or less...)


    12
    ls /usr/bin | xargs whatis | grep -v nothing | less
    michelsberg · 2010-01-26 12:59:47 32
  • Useful for Maven multimodule projects, where you want to extract all packaged jar files.


    -3
    find . -iname "*.jar" -exec cp '{}' /tmp/ \;
    unixmonkey6754 · 2010-01-26 12:19:15 3
  • This command has been used to overwrite corrupted "entries" files of a corrupted subversion working copy. Note the --files-from input format.


    3
    rsync -vd --files-from=<(find . -name entries -print ) . ../target_directory
    samyboy · 2010-01-26 09:41:12 6
  • This command toggles the touchpad on and off, when it's on, the right side scroll strip (annoying) and the tap-clicking are disabled, you can change this by changing occurances of 2 in the command to 0. this whole command can then be given a keyboard shortcut so that the touchpad is disableable without using a special fn key (which linux doesn't recognize on some computers) or a seperate button.


    -3
    if [ $(synclient -l | grep TouchpadOff | awk '{print $3}') = "2" ]; then synclient TouchpadOff=1; elif [ $(synclient -l | grep TouchpadOff | awk '{print $3}') == "1" ]; then synclient TouchpadOff=2; else synclient TouchpadOff=2; fi
    GinoMan2440 · 2010-01-26 07:52:55 5

  • 1
    find . -maxdepth 1 -type d -exec 'mv "{}" "{}-old" && svnadmin create "{}" && svnadmin recover "{}-old" && svnadmin dump "{}-old" | svnadmin load "{}" && rm -rf "{}-old"' \;
    raspi · 2010-01-26 07:06:43 3

  • 7
    for i in $(ls /usr/bin); do whatis $i | grep -v nothing; done | more
    Abiden · 2010-01-26 06:15:54 7

  • -2
    7za x \*.zip
    andrew112358 · 2010-01-25 21:50:15 2
  • Traditionally we rewind a tape using this syntaxis: mt -f /dev/rmt/0cbn rewind Redirecting the dispositive to nothing as shown above is faster. Less typing is always better.


    2
    < /dev/rmt/0cbn
    vlan7 · 2010-01-25 20:32:38 3

  • -1
    find . -maxdepth 1 -type f| xargs sha1sum | sed 's/^\(\w*\)\s*\(.*\)/\2 \1/' | while read LINE; do mv $LINE; done
    foremire · 2010-01-25 20:21:01 11
  • for example if you did a: ls -la /bin/ls then ls !$ is equivalent to doing a ls /bin/ls


    9
    !$
    ringlerun · 2010-01-24 17:59:52 23
  • running top command in batch mode. it is usefull if you want to redirect the output in a file. Show Sample Output


    2
    top -b -n 1
    r00t4u · 2010-01-24 16:17:30 5

  • 0
    dpkg -l | grep ^rc | awk '{print $2}' | sudo xargs dpkg -P
    kayowas · 2010-01-24 14:23:37 4
  • Use find's built-in ability to call programs. Alternatively, find -maxdepth 1 -type f -name "*.7z" -print0 | xargx -0 -n 1 7zr e would work, too.


    -1
    find -maxdepth 1 -type f -name "*.7z" -exec 7zr e '{}' ';'
    minnmass · 2010-01-23 19:50:10 4

  • 0
    find . -type f -exec stat \{\} \; | grep Modify: | awk '{a[$2]++}END{for(i in a){print i " : " a[i] }}' | sort
    pepin · 2010-01-23 07:55:16 6
  • Restores the keyboard so your partner who expects the keys to correspond to what they're labelled can type (in qwerty).


    -2
    setxkbmap us
    keturn · 2010-01-23 04:08:46 4
  • What to type to fix the keyboard when it's all qwerty and/or the modifier key to the left of the 'a' is doing something unexpected. In addition, I've also been known to use the altwin:meta_win and compose:ralt flags.


    0
    setxkbmap dvorak '' ctrl:nocaps
    keturn · 2010-01-23 04:04:59 3
  • A command to post a message to Twitter that includes your geo-location and a short URL. The link shortening service is provide by TinyURL, the geo-location service is provided by HostIP and the IP address lookup service is provided by AppSpot. This is an upgrade of an of one of my previous contributions: http://tinyurl.com/yd2xtzv.


    4
    curl --user "USERNAME:PASSWORD" -d status="MESSAGE_GOES_HERE $(curl -s tinyurl.com/api-create.php?url=URL_GOES_HERE) $(curl -s api.hostip.info/get_html.php?ip=$(curl ip.appspot.com))" -d source="cURL" twitter.com/statuses/update.json -o /dev/null
    o0110o · 2010-01-23 02:21:57 11

  • -7
    scp /home/svnlabs.txt root@92.178.0.56:/home/
    bakhru · 2010-01-22 21:19:37 5

  • 10
    nmap -T4 -sP 192.168.2.0/24 && egrep "00:00:00:00:00:00" /proc/net/arp
    wincus · 2010-01-22 20:36:43 8

  • 3
    for file in *.7z; do 7zr e "$file"; done
    jmcantrell · 2010-01-22 18:42:20 11
  • Connect EC2 server with public keys "/root/.ec2/id_rsa-gsg-keypair" or "/root/.ec2/keypair.pem"


    -2
    rsync -avvvz -e "ssh -i /root/.ec2/id_rsa-gsg-keypair" --archive --progress /root/.ec2/id_rsa-gsg-keypair root@ec2-75-101-212-113.compute-1.amazonaws.com:/root
    lalit241 · 2010-01-22 17:21:58 3
  • Upload file to remote server using SCP


    -9
    scp -P 22 /home/svnlabs.txt root@92.178.0.56:/home/svnlabs.txt
    lalit241 · 2010-01-22 17:21:07 3
  • Upload file to remote server using SCP


    -6
    scp -P 22 /home/svnlabs.txt root@92.178.0.56:/home/svnlabs.txt
    svnlabs · 2010-01-22 16:55:25 4
  • ‹ First  < 406 407 408 409 410 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

list block level layout

awk date convert
Convert readable date/time with `date` command

Alias TAIL for automatic smart output
Run the alias command, then issue $ps aux | tail and resize your terminal window (putty/console/hyperterm/xterm/etc) then issue the same command and you'll understand. $ ${LINES:-`tput lines 2>/dev/null||echo -n 12`} Insructs the shell that if LINES is not set or null to use the output from `tput lines` ( ncurses based terminal access ) to get the number of lines in your terminal. But furthermore, in case that doesn't work either, it will default to using the default of 80. The default for TAIL is to output the last 10 lines, this alias changes the default to output the last x lines instead, where x is the number of lines currently displayed on your terminal - 7. The -7 is there so that the top line displayed is the command you ran that used TAIL, ie the prompt. Depending on whether your PS1 and/or PROMPT_COMMAND output more than 1 line (mine is 3) you will want to increase from -2. So with my prompt being the following, I need -7, or - 5 if I only want to display the commandline at the top. ( http://www.askapache.com/linux/bash-power-prompt.html ) 275MB/748MB [7995:7993 - 0:186] 06:26:49 Thu Apr 08 [askapache@n1-backbone5:/dev/pts/0 +1] ~ $ In most shells the LINES variable is created automatically at login and updated when the terminal is resized (28 linux, 23/20 others for SIGWINCH) to contain the number of vertical lines that can fit in your terminal window. Because the alias doesn't hard-code the current LINES but relys on the $LINES variable, this is a dynamic alias that will always work on a tty device.

generate a unique and secure password for every website that you login to
usage: sitepass MaStErPaSsWoRd example.com description: An admittedly excessive amount of hashing, but this will give you a pretty secure password, It also eliminates repeated characters and deletes itself from your command history. tr '!-~' 'P-~!-O' # this bit is rot47, kinda like rot13 but more nerdy rev # this avoids the first few bytes of gzip payload, and the magic bytes.

Route outbound SMTP connections through a addtional IP address rather than your primary

View all images
So you are in directory with loads of pictures laying around and you need to quickly scan through them all

Renaming a file without overwiting an existing file name
Sometimes in a hurry you may move or copy a file using an already existent file name. If you aliased the cp and mv command with the -i option you are prompted for a confirmation before overwriting but if your aliases aren't there you will loose the target file! The -b option will force the mv command to check if the destination file already exists and if it is already there a backup copy with an ending ~ is created.

Extract the MBR ID of a device
Useful when you want to know the mbrid of a device - for the purpose of making it bootable. Certain hybridiso distros, for eg the OpenSUSE live ISO uses the mbrid to find the live media. Use this command to find out the mbrid of your USB drive and then edit the /grub/mbrid file to match it.

Convert CSV to JSON
Replace 'csv_file.csv' with your filename.

Find files that were modified by a given command
Traces the system calls of a program. See http://linuxhelp.blogspot.com/2006/05/strace-very-powerful-troubleshooting.html for more information.


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: