All commands

All commands (14,211)

sorted by

Disassemble all ACPI tables on your system

The fact that Linux exposes the ACPI tables to the user via sysfs makes them a gold mine of valuable hardware information for low-level developers. Looping through each of them and disassembling them all makes them even more valuable.
This is sample output - yours may be different.
1

for i in /sys/firmware/acpi/tables/*; do sudo iasl -p $PWD/$(echo $i | cut -d\/ -f6) $i && sudo chown $USER $(echo $i | cut -d\/ -f6); done

realkstrawn93 · 2023-04-16 05:33:51 554
Polkit: Force KDE apps to always recognize your display

KDE apps expect certain variables to be set, and unfortunately pkexec doesn’t set them by default. So, by setting this alias, it becomes possible to run, e.g. “pkexec kate” or “pkexec dolphin” and it’ll actually run.
This is sample output - yours may be different.
1

alias pkexec=“pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY KDE_SESSION_VERSION=5 KDE_FULL_SESSION=true”

realkstrawn93 · 2023-04-13 05:37:36 326
Loops over files, runs a command, dumps output to a file

In this case I'm selecting all php files in a dir, then echoing the filename and piping it to ~/temp/errors.txt. Then I'm running my alias for PHPCS (WordPress flags in my alias), then piping the PHPCS output to grep and looking for GET. Then I'm piping that output to the same file as above. This gets a list of files and under each file the GET security errors for that file. Extrapolate this to run any command on any list of files and pipe the output to a file. Remove the >> ~/temp/errors.txt to get output to the screen rather than to a file. Show Sample Output
This is sample output - yours may be different.
```
header.php
index.php
page.php
search.php
  19 | ERROR   | [ ] Detected usage of a possibly undefined superglobal array index: $_GET['s']. Use isset() or empty() to check the index exists before using it
  99 | ERROR   | [x] Short PHP opening tag used with echo; expected "<?php echo $_GET ..." but found "<?= $_GET ..."
  99 | ERROR   | [ ] All output should be run through an escaping function (see the Security sections in the WordPress Developer Handbooks), found '$_GET['s']'.
```
0

for f in *php; do echo $f >> ~/temp/errors.txt; phpcsw $f | grep GET >> ~/temp/errors.txt; done

topher1kenobe · 2023-04-12 14:17:14 377
Download Video & extract only a specific Time of it
This is sample output - yours may be different.
1

fmpeg $(yt-dlp -g 'https://de.pornhub.com/view_video.php?viewkey=ph637366806d6eb' | sed 's/^/-ss 00:05 -i /') -t 01:00 -c copy out.mp4

dbiesecke · 2023-04-01 17:39:01 346
urldecode with AWK

Fast and simple awk urldecoder! Note: Parameter -n is specific to GNU awk Show Sample Output
This is sample output - yours may be different.
```
echo -e  "asdf%2Fxx%2Cx\n%2F%2Cxx"  | awk -niord '{printf RT?$0chr("0x"substr(RT,2)):$0}' RS=%..
asdf/xx,x
/,xx
```
2

awk -niord '{printf RT?$0chr("0x"substr(RT,2)):$0}' RS=%..

emphazer · 2023-03-30 15:05:58 328
Create a square thumbnail or favicon using ImageMagick

Resize `file.png` to a 32x32 px image. Use a value other than 32 to create other icon sizes (e.g. 16x16 or 32x32). Combine two favicon sizes using: `convert icon-16px.png icon-32px.png favicon.ico` For a social media preview image, use `2:1#` for the extent and `1200` for the scale.
This is sample output - yours may be different.
9

convert file.png -background transparent -gravity Center -extent 1:1# -scale 32 file-32px.png

lgarron · 2023-03-08 04:11:12 621
List all files in a folder in a git repository by last commit date

This lists all the files in a folder, then finds the commit date for them one by one, then sorts them from newest to oldest
This is sample output - yours may be different.
6

git ls-tree --name-only HEAD foldername/ | while read filename; do echo "$(git log -1 --format="%ci " -- $filename) $filename"; done | sort -r

fivestones · 2023-03-01 17:02:51 279
A Console-based Audio Visualizer for ALSA

# Installing apt search cava sudo apt install cava # modify the default config to change the colors by their hex color code cava -p mkdir ~/.cava nano ~/.cava/config cava # run with changes!
This is sample output - yours may be different.
3

cava

ioshield · 2023-02-28 19:53:42 374
Speak & Spell-esque glitch sounds

The Speak & Spell's sound chip uses a compressed audio format called "linear predictive coding". This command will read random bytes and attempt to decompress them as if it were audio data compressed in this format, then play it. This results in a unique sound which is similar to a glitching Speak & Spell.
This is sample output - yours may be different.
6

play -tlpc /dev/urandom

Sparkette · 2023-02-16 22:28:16 555
Bypass with hexencoding, dump /etc/passwd
This is sample output - yours may be different.
4

cat $(echo -e "\x2f\x65\x74\x63\x2f\x70\x61\x73\x73\x77\x64")

wuseman1 · 2023-01-14 06:43:27 1052
List all files and folders with attributes
This is sample output - yours may be different.
-3

gci -rec | Select-Object Mode, Name, CreationTime, LastAccessTime, LastWriteTime | ft -autosize

swarzynski · 2022-12-07 13:24:42 1486
Copy a file with progress and save hash to a different file
This is sample output - yours may be different.
4

pv file.txt | tee >(sha1sum > file.sha1) > file-copy.txt

bugmenot · 2022-11-24 20:23:02 1312
AWS s3api CLI can be used to filter objects in a S3 bucket based on the Last Modified Date using the --query filter.

as explained in the blog post: https://www.learnaws.org/2022/10/10/aws-s3-list-files-date/
This is sample output - yours may be different.
-2

aws s3api list-objects-v2 --bucket my-bucket --query 'Contents[?LastModified>`2022-01-01`].Key'

shantanuo · 2022-11-22 07:57:44 948
Unzip 25 zip files files at once
This is sample output - yours may be different.
3

find . -maxdepth 1 -name '*.zip' -print0 | xargs -0 -I {} -P 25 unzip {}

wuseman1 · 2022-11-20 14:07:44 464
Convert an image sequence into a video
This is sample output - yours may be different.
9

ffmpeg -framerate 30 -pattern_type glob -i '*.jpg' -c:v libx264 -pix_fmt yuv420p out.mp4

alikhalil · 2022-11-14 07:20:53 822
MySQL: Filter out specific tables from an existing mysqldump file with awk

This command works only if the line "DROP TABLE IF EXISTS" exists for all tables in the mysqldump file. It acts like a state machine.
This is sample output - yours may be different.
0

cat db_dump.sql | awk '/DROP TABLE IF EXISTS/ { skip = $5 ~ /table1|table2/ } !skip { print $0 }' > db_dump_filtered.sql

stf42 · 2022-10-30 16:58:57 807

How To Display Bash History Without Line Numbers

userful for direct copy & paste command for doumenation or next using Show Sample Output

history -w /dev/stdout

aysadk · 2022-10-29 15:17:37 898

merge multiple jpgs to one picture vertikal

# convert tool is from deb imagemagick-6.q16 apt install imagemagick-6.q16 Show Sample Output
This is sample output - yours may be different.
```
Output_merged_picture.jpg
```
3

convert picture-1.jpg picture-2.jpg picture-3.jpg -append Output_merged_picture.jpg

aysadk · 2022-10-25 15:34:48 549

Start monitoring your server with a single curl command.

activate the first alert and the next ones are activated automatically. Show Sample Output

curl ping.gl

wuseman1 · 2022-10-15 13:24:45 874

Show a zoomable world map

show a zoomable world map
This is sample output - yours may be different.
11

telnet mapscii.me

wuseman1 · 2022-10-15 13:15:17 591
List all packages in Ubuntu/Debian that no package depends on
This is sample output - yours may be different.
3

dpkg-query --show --showformat='${Package}\t${Status}\n' | tac | awk '/installed$/ {print $1}' | xargs apt-cache rdepends --installed | tac | awk '{ if (/^ /) ++deps; else if (!/:$/) { if (!deps) print; deps = 0 } }'

swarzynski · 2022-09-29 07:55:16 1063
Print nic name of current connection
This is sample output - yours may be different.
2

nmcli -g name,type connection show --active|awk -F: '/ethernet|wireless/ { print $1 }'

wuseman1 · 2022-09-22 20:16:21 728
Simple tar

Simple commant to tar a path
This is sample output - yours may be different.
-2

tar -cvzf file.tar.gz path

x3mboy · 2022-09-17 16:40:09 927
rclone - dump teamdrive config to config file
This is sample output - yours may be different.
0

$ rclone backend -o your-config.conf drives mydrive:

dbiesecke · 2022-09-09 15:58:16 645
url redirect tracer with curl

tracing redirects for a given url shortener Show Sample Output
This is sample output - yours may be different.
```
Location: https://www.shorturl.at/dfIJQ
location: https://youtu.be/dQw4w9WgXcQ
location: https://www.youtube.com/watch?v=dQw4w9WgXcQ&feature=youtu.be
```
6

curl --silent -I -L shorturl.at/dfIJQ | grep -i location

aysadk · 2022-09-04 19:31:46 860
< 1 2 3 4 5 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Disable sending of start/stop characters

This command disable sending of start/stop characters. It's useful when you want to use incremental reverse history search forward shortcut (Ctrl+s). To enable again, type: $ stty -ixoff

See system users

Install pip with Proxy

Installs pip packages defining a proxy

add repeated watermark to image

Create an SSH SOCKS proxy server on localhost:8000 that will re-start itself if something breaks the connection temporarily

This command will log you into somehost via SSH and then go into the background (-f). From there, you can point e.g. firefox at localhost:8000 as a SOCKS proxy. Autossh will use port 20000 and 20001 to send and receive test data on those ports to ensure the SSH tunnel is still running, and will try to re-start the tunnel if it goes down. Make sure you have ssh-agent running, or passwordless ssh keys distributed between the two hosts.

print all except first collumn

add repeated watermark to image

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

check spell in c source code

Copy via tar pipe while preserving file permissions (cp does not!; run this command with root!)

cp options: -p will preserve the file mode, ownership, and timestamps -r will copy files recursively also, if you want to keep symlinks in addition to the above: use the -a/--archive option

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,211) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,211)

sorted by