All commands (14,187)

  • I must monitorize a couple of ftp servers every morning WITHOUT a port-scanner Instead of ftp'ing on 100 ftp servers manually to test their status I use this loop. It might be adaptable to other services, however it may require a 'logout' string instead of 'quit'. The file ftps.txt contains the full list of ftp servers to monitorize.


    1
    for host in $(cat ftps.txt) ; do if echo -en "o $host 21\nquit\n" |telnet 2>/dev/null |grep -v 'Connected to' >/dev/null; then echo -en "FTP $host KO\n"; fi done
    vlan7 · 2010-01-26 15:34:18 3
  • Recursive grep through directory for file.


    -5
    find directory/ |xargs grep -i "phrase"
    tuxtutorials · 2010-01-26 14:56:56 3
  • no loop, only one call of grep, scrollable ("less is more", more or less...)


    12
    ls /usr/bin | xargs whatis | grep -v nothing | less
    michelsberg · 2010-01-26 12:59:47 32
  • Useful for Maven multimodule projects, where you want to extract all packaged jar files.


    -3
    find . -iname "*.jar" -exec cp '{}' /tmp/ \;
    unixmonkey6754 · 2010-01-26 12:19:15 3
  • This command has been used to overwrite corrupted "entries" files of a corrupted subversion working copy. Note the --files-from input format.


    3
    rsync -vd --files-from=<(find . -name entries -print ) . ../target_directory
    samyboy · 2010-01-26 09:41:12 6
  • This command toggles the touchpad on and off, when it's on, the right side scroll strip (annoying) and the tap-clicking are disabled, you can change this by changing occurances of 2 in the command to 0. this whole command can then be given a keyboard shortcut so that the touchpad is disableable without using a special fn key (which linux doesn't recognize on some computers) or a seperate button.


    -3
    if [ $(synclient -l | grep TouchpadOff | awk '{print $3}') = "2" ]; then synclient TouchpadOff=1; elif [ $(synclient -l | grep TouchpadOff | awk '{print $3}') == "1" ]; then synclient TouchpadOff=2; else synclient TouchpadOff=2; fi
    GinoMan2440 · 2010-01-26 07:52:55 5

  • 1
    find . -maxdepth 1 -type d -exec 'mv "{}" "{}-old" && svnadmin create "{}" && svnadmin recover "{}-old" && svnadmin dump "{}-old" | svnadmin load "{}" && rm -rf "{}-old"' \;
    raspi · 2010-01-26 07:06:43 3

  • 7
    for i in $(ls /usr/bin); do whatis $i | grep -v nothing; done | more
    Abiden · 2010-01-26 06:15:54 7

  • -2
    7za x \*.zip
    andrew112358 · 2010-01-25 21:50:15 2
  • Traditionally we rewind a tape using this syntaxis: mt -f /dev/rmt/0cbn rewind Redirecting the dispositive to nothing as shown above is faster. Less typing is always better.


    2
    < /dev/rmt/0cbn
    vlan7 · 2010-01-25 20:32:38 3

  • -1
    find . -maxdepth 1 -type f| xargs sha1sum | sed 's/^\(\w*\)\s*\(.*\)/\2 \1/' | while read LINE; do mv $LINE; done
    foremire · 2010-01-25 20:21:01 11
  • for example if you did a: ls -la /bin/ls then ls !$ is equivalent to doing a ls /bin/ls


    9
    !$
    ringlerun · 2010-01-24 17:59:52 23
  • running top command in batch mode. it is usefull if you want to redirect the output in a file. Show Sample Output


    2
    top -b -n 1
    r00t4u · 2010-01-24 16:17:30 5

  • 0
    dpkg -l | grep ^rc | awk '{print $2}' | sudo xargs dpkg -P
    kayowas · 2010-01-24 14:23:37 4
  • Use find's built-in ability to call programs. Alternatively, find -maxdepth 1 -type f -name "*.7z" -print0 | xargx -0 -n 1 7zr e would work, too.


    -1
    find -maxdepth 1 -type f -name "*.7z" -exec 7zr e '{}' ';'
    minnmass · 2010-01-23 19:50:10 4

  • 0
    find . -type f -exec stat \{\} \; | grep Modify: | awk '{a[$2]++}END{for(i in a){print i " : " a[i] }}' | sort
    pepin · 2010-01-23 07:55:16 6
  • Restores the keyboard so your partner who expects the keys to correspond to what they're labelled can type (in qwerty).


    -2
    setxkbmap us
    keturn · 2010-01-23 04:08:46 4
  • What to type to fix the keyboard when it's all qwerty and/or the modifier key to the left of the 'a' is doing something unexpected. In addition, I've also been known to use the altwin:meta_win and compose:ralt flags.


    0
    setxkbmap dvorak '' ctrl:nocaps
    keturn · 2010-01-23 04:04:59 3
  • A command to post a message to Twitter that includes your geo-location and a short URL. The link shortening service is provide by TinyURL, the geo-location service is provided by HostIP and the IP address lookup service is provided by AppSpot. This is an upgrade of an of one of my previous contributions: http://tinyurl.com/yd2xtzv.


    4
    curl --user "USERNAME:PASSWORD" -d status="MESSAGE_GOES_HERE $(curl -s tinyurl.com/api-create.php?url=URL_GOES_HERE) $(curl -s api.hostip.info/get_html.php?ip=$(curl ip.appspot.com))" -d source="cURL" twitter.com/statuses/update.json -o /dev/null
    o0110o · 2010-01-23 02:21:57 11

  • -7
    scp /home/svnlabs.txt root@92.178.0.56:/home/
    bakhru · 2010-01-22 21:19:37 5

  • 10
    nmap -T4 -sP 192.168.2.0/24 && egrep "00:00:00:00:00:00" /proc/net/arp
    wincus · 2010-01-22 20:36:43 8

  • 3
    for file in *.7z; do 7zr e "$file"; done
    jmcantrell · 2010-01-22 18:42:20 11
  • Connect EC2 server with public keys "/root/.ec2/id_rsa-gsg-keypair" or "/root/.ec2/keypair.pem"


    -2
    rsync -avvvz -e "ssh -i /root/.ec2/id_rsa-gsg-keypair" --archive --progress /root/.ec2/id_rsa-gsg-keypair root@ec2-75-101-212-113.compute-1.amazonaws.com:/root
    lalit241 · 2010-01-22 17:21:58 3
  • Upload file to remote server using SCP


    -9
    scp -P 22 /home/svnlabs.txt root@92.178.0.56:/home/svnlabs.txt
    lalit241 · 2010-01-22 17:21:07 3
  • Upload file to remote server using SCP


    -6
    scp -P 22 /home/svnlabs.txt root@92.178.0.56:/home/svnlabs.txt
    svnlabs · 2010-01-22 16:55:25 4
  • ‹ First  < 406 407 408 409 410 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

Get AWS temporary credentials ready to export based on a MFA virtual appliance
You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

Combines an arbitrary number of transparent png files into one file
This one liner; combines all sequentially numbered files; in this example IMG_0001.png to IMG_1121.png by generating the shell script, making the shell script executable and then running the shell script to combine the 1121 png into a single png file named _final.png tested on Mac OS X 10.6.3 with ImageMagick 6.5.8-0 2009-11-22 Q16 http://www.imagemagick.org

remove the last of all html files in a directory
sed can be used deleting the last line and with -i option, there's no need to for temp files, the change is made on the actual file

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Check the hard disk vendor and model on Apple Mac

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Execute a command without saving it in the history
Yes, by correctly setting the HIST* variables you can make certain commands not saved in history. But that's complicated and easy to make a mistake. If you set HISTFILE= to blank, nothing in your current shell session will be saved in history. Although this is not a precise answer to the subject, but it's very simple.

reset Mageia urpmi media sources to network only
On Mageia (and Mandriva) Linux, this command will clear your existing urpmi configuration and configure it to use only network sources. It can be useful after you have installed from CD/DVD and don't want to continually be prompted to insert CD/DVD each time you install a package. acknowledgement: blino

Download SSL/TLS pem format cert from https web host

list files recursively by size


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: