Commands tagged color (58)

  • Don't want to open up an editor just to view a bunch of XML files in an easy to read format? Now you can do it from the comfort of your own command line! :-) This creates a new function, xmlpager, which shows an XML file in its entirety, but with the actual content (non-tag text) highlighted. It does this by setting the foreground to color #4 (red) after every tag and resets it before the next tag. (Hint: try `tput bold` as an alternative). I use 'xmlindent' to neatly reflow and indent the text, but, of course, that's optional. If you don't have xmlindent, just replace it with 'cat'. Additionally, this example shows piping into the optional 'less' pager; note the -r option which allows raw escape codes to be passed to the terminal. Show Sample Output


    0
    xmlpager() { xmlindent "$@" | awk '{gsub(">",">'`tput setf 4`'"); gsub("<","'`tput sgr0`'<"); print;} END {print "'`tput sgr0`'"}' | less -r; }
    hackerb9 · 2015-07-12 09:22:10 11
  • Basically, \033[ is a semi-portable unix escape character. It should work in linux, osx, bsd, etc. The first option is 38. This tells whatever is interpreting this (and this is merely convention) that a special color sequence follows. The next option is 5 which says that the next option will specify a color ? {0..256} of course. These options, as you can see, are separated by a single `;` and the entire escape sequence is followed by a mandatory `m`. The second escape sequence (following "COLOR") is simply to clear all terminal attributes (for our purposes, it clears color). This for loop is helpful for testing all 256 colors in a 256 console (note: this will not work in a standard Linux tty console) or to see which number corresponds to which color so that perhaps you can use it! Show Sample Output


    0
    for i in {0..256}; do echo -e "${i} \033[38;05;${i}m COLOR \033[0m"; done
    Benharper · 2015-12-17 23:49:42 12
  • Count the number of unique colors there are in a websites css folder (136 is way too many imho time to get people stick to a color scheme) Show Sample Output


    0
    grep -r -h -o 'color: #.*' css/*|sort|uniq -c|sort -n|wc -l
    thoth · 2015-12-29 07:22:44 10
  • I've shortened it to: lsc PATH | l ... by adding ... alias lsc="ls --color" ... and ... alias l="less -R" ... to my ~/.bashrc file


    0
    ls --color PATH | less -R
    kevjonesin · 2016-03-07 13:46:02 13

  • 0
    ls -l --color | less -R
    Sparkette · 2016-05-07 17:19:56 11
  • A simple PS1, ready to be used. Just paste in your ~/.bashrc Show Sample Output


    0
    export PS1="[\[\e[1;32m\]\u\[\e[m\]\[\e[1;31m\]@\[\e[m\]\[\e[3;35m\]\H\[\e[m\] \[\e[1;30m\]| \[\e[m\]\[\e[1;34m\]\w\[\e[m\] \[\e[1;29m\]\t\[\e[m\]]\[\e[1;33m\]$\[\e[m\]"
    thelaser · 2017-03-24 14:21:20 15
  • exa

    nothing fancy `ls` alternative `exa`, with most info printed and passed through less with the `-R` (raw) option, to preserve colour output https://github.com/ogham/exa You can add or remove `-@` to print extended attributes for files that have them. Show Sample Output


    -1
    exa -glhrSuU -s size --group-directories-first -@ | less -R
    wires · 2016-02-27 17:19:43 96
  • but you can't see the colors in that sample output :( Show Sample Output


    -2
    tail -f file | egrep --color=always $\|PATTERN
    sitaram · 2009-10-15 13:08:30 33
  •  < 1 2 3

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

Set laptop display brightness
Run as root. Path may vary depending on laptop model and video card (this was tested on an Acer laptop with ATI HD3200 video). $ cat /proc/acpi/video/VGA/LCD/brightness to discover the possible values for your display.

Google URL shortener
Use curl and sed to shorten an URL using goo.gl without any other api

Ext3 format Terabytes in Seconds

Hold off any screensavers/timeouts
Moves the mouse 1 pixel down and to the right, then immediately back again, every 4 minutes. This keeps screensavers from turning on. I have used this extensively and I've never even noticed the mouse movement because it is so subtle.

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Reset hosed terminal,
stty sane resets the tty to basic usable function. The ^J is a newline -- sometimes CR/LF interpretation is broken so use the ^J explicitly.

Function that outputs dots every second until command completes
Very useful in shell scripts because you can run a task nicely in the background using job-control and output progress until it completes. Here's an example of how I use it in backup scripts to run gpg in the background to encrypt an archive file (which I create in this same way). $! is the process ID of the last run command, which is saved here as the variable PI, then sleeper is called with the process id of the gpg task (PI), and sleeper is also specified to output : instead of the default . every 3 seconds instead of the default 1. So a shorter version would be sleeper $!; The wait is also used here, though it may not be needed on your system. $ echo ">>> ENCRYPTING SQL BACKUP" $ gpg --output archive.tgz.asc --encrypt archive.tgz 1>/dev/null & $ PI=$!; sleeper $PI ":" 3; wait $PI && rm archive.tgz &>/dev/null Previously to get around the $! not always being available, I would instead check for the existance of the process ID by checking if the directory /proc/$PID existed, but not everyone uses proc anymore. That version is currently the one at http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html but I plan on upgrading to this new version soon.

Remove all mail in Postfix mail queue.

Install pip with Proxy
Installs pip packages defining a proxy

Replace spaces in a filename with hyphens
As long as you have perl based rename. You can check: =$ rename --help Unknown option: help Usage: rename [-v] [-n] [-f] perlexpr [filenames] That's the good one.


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: