Commands tagged cable modem (1)

  • IMPORTANT: You need Windows PowerShell to run this command - in your Windows Command Prompt, type powershell Create a log file of your Motorola Surfboard SB6141 downstream signal strengths. Uses the built-in curl to request signal strength data from your SB6141 cable modem. HTML page 192.168.100.1/cmSignalData.htm has the signal strength numbers for the 8 downstreams. Some HTML/DOM processing parses out the 8 values from the above page. The eight extracted signal strengths are then logged to a file. A small while-loop watches the clock & repeats the process every 10 seconds. Show Sample Output


    0
    while(1){while((date -f ss)%10-gt0){sleep -m 300} echo "$(date -u %s) $((curl 192.168.100.1/cmSignalData.htm).parsedhtml.body.childnodes.item(1).firstchild.firstchild.childnodes.item(5).outertext|%{$_ -replace '\D+\n',''})">>modemlog.txt;sleep 1;echo .}
    omap7777 · 2015-12-24 02:12:10 0

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

Remove blank lines from a file using grep and save output to new file

Make alias pemanent fast
Simple function to permanently add an alias to your profile. Tested on bash and Ksh, bash version above. Here is the ksh version: PERMA () { print "$@" >> ~/.profile; } Sample usage: PERMA alias la='ls -a'

finds the c files with lines containing 'mcs', in the folders under the current folder

Show a config file without comments
Shows a file without comments (at least those starting by #) - removes empty lines - removes lines starting by # or "some spaces/tabs then #'" Useful when you want to quickly see what you have to customize on a freshly installed application without reading the comments that sometimes are a full 1000 lines documentation :) While posting, I saw this http://www.commandlinefu.com/commands/view/1041/display-contents-of-a-file-wo-any-comments-or-blank-lines But it's dirty and incomplete, to my mind My original goal was to remove lines like "\t*#" but I can't figure out how to do a egrep '\t' on a command-line. Two workarounds if needed: $egrep -v 'press control + V then TAB then #' /your/file or $egrep -v -f some_file /your/file #where some_file contains what you want to exclude, example a really inserted TAB

Getting a domain from url, ex: very nice to get url from squid access.log

Convert JSON to YAML
Requires installing json2yaml via npm: npm install -g json2yaml (can also pipe from stdin) Ref: https://www.npmjs.com/package/json2yaml

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

shortcut to scp a file to the same location on a remote machine
This will copy a file from your current directory to the same location on another machine. Handy for configuring ha, copying your resolv.conf, .bashrc, anything in /usr/local, etc.

Find usb device in realtime
Using this command you can track a moment when usb device was attached.

Create the four oauth keys required for a Twitter stream feed
Twitter stream feeds now require authentication. This command is the FIRST in a set of five commands you'll need to get Twitter authorization for your final Twitter command. *** IMPORTANT *** Before you start, you have to get some authorization info for your "app" from Twitter. Carefully follow the instructions below: Go to dev.twitter.com/apps and choose "Create a new application". Fill in the form. You can pick any name for your app. After submitting, click on "Create my access token". Keep the resulting page open, as you'll need information from it below. If you closed the page, or want to get back to it in the future, just go to dev.twitter.com/apps Now customize FIVE THINGS on the command line as follows: 1. Replace the string "Consumer key" by copying & pasting your custom consumer key from the Twitter apps page. 2. Replace the string "Consumer secret" by copying & pasting your consumer secret from the Twitter apps page. 3. Replace the string "Access token" by copying & pasting your access token from the Twitter apps page. 4. Replace string "Access token secret" by copying & pasting your own token secret from the Twitter apps page. 5. Replace the string 19258798 with the Twitter UserID NUMBER (this is **NOT** the normal Twitter NAME of the user you want the tweet feed from. If you don't know the UserID number, head over to www.idfromuser.com and type in the user's regular Twitter name. The site will return their Twitter UserID number to you. 19258798 is the Twitter UserID for commandlinefu, so if you don't change that, you'll receive commandlinefu tweets, uhm... on the commandline :) Congratulations! You're done creating all the keys! Environment variables k1, k2, k3, and k4 now hold the four Twitter keys you will need for your next step. The variables should really have been named better, e.g. "Consumer_key", but in later commands the 256-character limit forced me to use short, unclear names here. Just remember k stands for "key". Again, remember, you can always review your requested Twitter keys at dev.twitter.com/apps. Our command line also creates four additional environment variables that are needed in the oauth process: "once", "ts", "hmac" and "id". "once" is a random number used only once that is part of the oauth procedure. HMAC is the actual key that will be used later for signing the base string. "ts" is a timestamp in the Posix time format. The last variable (id) is the user id number of the Twitter user you want to get feeds from. Note that id is ***NOT*** the twitter name, if you didn't know that, see www.idfromuser.com If you want to learn more about oauth authentication, visit oauth.net and/or go to dev.twitter.com/apps, click on any of your apps and then click on "Oauth tool" Now go look at my next command, i.e. step2, to see what happens next to these eight variables.


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: