Commands using tar (226)

  • Find (by regular expression) and compress (xzip) catalogs then remove source catalogs


    0
    find . -type d |awk '$1 ~ /[0-9]/ {print $0}' |xargs -P 4 -I NAME tar --remove-files -vcJf NAME.tar.xz NAME
    Glafir · 2017-08-28 08:05:29 19
  • untar in place with out creating a temporary file


    0
    ssh user@host "tar -zcf - /path/to/dir" | tar -xvz
    sandeep048 · 2017-10-07 11:37:51 18
  • I use screenflow to create and edit videos. The default storage for a single video is a folder. If I want to move that someplace, it's easier to zip up the folder and send it. If I'm making a series of short videos, I might have 10 folders. This will go through and make a single bz3 file for EACH folder.


    0
    for f in *screenflow ; do tar cvf "$f.tar.bz2" "$f"; done
    topher1kenobe · 2020-08-02 21:10:27 156
  • This is a little bash script that will take all files following the *gz pattern in the directory and apply the tar -zxvf command to them.


    -1
    for i in *.tar.gz *.tgz; do tar -zxvf $i; done
    bohemicus · 2009-02-18 10:58:12 8
  • Add z to the flags to enable compression.


    -1
    tar cf - . | (cd /new/dir; tar xvf -)
    jauderho · 2009-03-09 20:30:34 12
  • gpg's compression is as suitable as gzip's however your backups can now be encrypted. to extract use: gpg < folder.tpg | tar -xf -


    -1
    tar -cf - folder/ | gpg -c > folder.tpg
    copremesis · 2009-05-08 19:20:08 5

  • -1
    tar -C <source> -cf - . | tar -C <destination> -xf -
    Tekhne · 2009-07-10 21:16:23 4
  • Tar - Compress by excluding folders Show Sample Output


    -1
    tar -cvf /path/dir.tar /path/dir* --exclude "/path/dir/name" --exclude "/path/dir/opt"
    sandeepverma · 2009-12-15 09:48:41 3
  • Combines a few repetitive tasks when compiling source code. Especially useful when a hypen in a file-name breaks tab completion. 1.) wget source.tar.gz 2.) tar xzvf source.tar.gz 3.) cd source 4.) ls From there you can run ./configure, make and etc. Show Sample Output


    -1
    wtzc () { wget "$@"; foo=`echo "$@" | sed 's:.*/::'`; tar xzvf $foo; blah=`echo $foo | sed 's:,*/::'`; bar=`echo $blah | sed -e 's/\(.*\)\..*/\1/' -e 's/\(.*\)\..*/\1/'`; cd $bar; ls; }
    oshazard · 2010-01-17 11:25:47 3
  • You don't need to create an intermediate file, just pipe the output directly to tar command and use stin as file (put a dash after the f flag).


    -1
    cat 1.tar.gz 2.tar.gz | tar zxvif -
    psychopenguin · 2010-05-09 03:50:00 5
  • Using the COPYFILE_DISABLE=true environment variable you can prevent tar from adding any ._-files to your .tar-file on Mac OS X.


    -1
    COPYFILE_DISABLE=true tar cvf newTarFile.tar Directory/
    alainkaa · 2010-07-01 09:36:48 3

  • -1
    pbzip2 -dck <bz2file> | tar xvf -
    maarten · 2010-08-16 22:16:50 3
  • The J option is a recent addition to GNU tar. The xz compression utility is required as well.


    -1
    tar cfJ tarfile.tar.xz pathnames
    jasonjgw · 2010-11-18 05:34:17 2
  • `tar xfzO` extracts to STDOUT which got redirected directly to mysql. Really helpful, when your hard drive can't fit two copies of non-compressed database :)


    -1
    tar xfzO <backup_name>.tar.gz | mysql -u root <database_name>
    alecnmk · 2011-02-10 22:18:42 5
  • Sometimes you might need to have two copies of data that is in tar. You might unpack, and then copy, but if IO is slow, you might lower it by automatically writing it twice (or more times)


    -1
    mkdir copy{1,2}; gzip -dc file.tar.gz | tee >( tar x -C copy1/ ) | tar x -C copy2/
    depesz · 2011-04-14 17:02:05 5
  • Simple Compressed Backup of the /etc Linux compatible


    -1
    tar jcpf /home/[usuario]/etc-$(hostname)-backup-$(date +%Y%m%d-%H%M%S).tar.bz2 /etc
    mack · 2011-04-29 22:53:11 4
  • should do the same as command #12875, just shorter.


    -1
    tar -cf "../${PWD##*/}.tar" .
    joedhon · 2013-11-06 11:15:38 9
  • backup your files in tar archive + timestamp of backup Show Sample Output


    -1
    tar -cvf bind9-config-`date +%s`.tar *
    Fuonum · 2014-10-29 05:15:15 9
  • This is useful for sending data between 2 computers that you have shell access to. Uses tar compression during transfer. Files are compressed & uncompressed automatically. Note the trailing dash on the listening side that makes netcat listen to stdin for data. on the listening side: sudo nc -lp 2022 | sudo tar -xvf - explanation: open netcat to -l listen on -p port 2022, take the data stream and pipe to tar -x extract, -v verbose, -f using file filename - means "stdin" on the sending side: tar -cvzf - ./*| nc -w 3 name_of_listening_host 2022 explanation: compress all files in current dir using tar -c create, -v verbose, -f using file, - filename - here means "stdout" because we're tar -c instead of tar -x, -w3 wait 3 seconds on stream termination and then end the connection to the listening host name_of_listening_host, on port 2022


    -2
    on the listening side: sudo nc -lp 2022 | sudo tar -xvf - and on the sending side: tar -cvzf - ./*| nc -w 3 name_of_listening_host 2022
    smcpherson · 2009-03-27 09:59:33 12
  • Create a single tar.gz archive I know it's a very basic one, but it's one I keep forgetting. Show Sample Output


    -2
    tar -pczf archive_name.tar.gz /path/to/dir/or/file
    ryuslash · 2009-07-17 19:53:02 30
  • Using tape archive create a tar file in Stdout (-) and pipe that into a compound command to extract the tar file from Stdin at the destination. This similar to "Copy via tar pipe ...", but copies across file systems boundaries. I prefer to use cp -pr for copying within the same file system. Show Sample Output


    -2
    tar cpof - src |( cd des; tar xpof -)
    davidpotter42 · 2009-09-20 20:43:30 3
  • This script will list all the files in the tarballs present on any folder or subfolder of the provided path. The while loop is for echoing the file name of the tarball before listing the files, so the tarball can be identified


    -2
    find <path> -name "*.tgz" -or -name "*.tar.gz" | while read file; do echo "$file: "; tar -tzf $file; done
    polaco · 2009-11-10 20:39:04 36
  • The magic is performed by the parameter -t Show Sample Output


    -2
    for F in $(find ./ -name "*.tgz") ; do tar -tvzf $F ; done
    alchandia · 2009-11-11 00:50:52 3
  • This may seem like a long command, but it is great for making sure all file permissions are kept in tact. What it is doing is streaming the files in a sub-shell and then untarring them in the target directory. Please note that the -z command should not be used for local files and no perfomance increase will be visible as overhead processing (CPU) will be evident, and will slow down the copy. You also may keep simple with, but you don't have the progress info: cp -rpf /some/directory /other/path Show Sample Output


    -2
    dir='path to file'; tar cpf - "$dir" | pv -s $(du -sb "$dir" | awk '{print $1}') | tar xpf - -C /other/path
    starchox · 2010-01-19 19:05:45 3
  • xargs deals badly with special characters (such as space, ' and "). To see the problem try this: touch important_file touch 'not important_file' ls not* | xargs rm Parallel https://savannah.nongnu.org/projects/parallel/ does not have this problem.


    -2
    tar -tf <file.tar.gz> | parallel rm
    unixmonkey8046 · 2010-01-28 08:28:16 3
  • ‹ First  < 6 7 8 9 10 > 

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

Calculate the distance between two geographic coordinates points (latitude longitude)
The Haversine formula determines the great-circle distance between two points on a sphere given their longitudes and latitudes.

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Download all images from a 4chan thread
Useful for ripping wallpaper from 4chan.org/wg

ssh to machine behind shared NAT
Useful to get network access to a machine behind shared IP NAT. Assumes you have an accessible jump host and physical console or drac/ilo/lom etc access to run the command. Run the command on the host behind NAT then ssh connect to your jump host on port 2222. That connection to the jump host will be forwarded to the hidden machine. Note: Some older versions of ssh do not acknowledge the bind address (0.0.0.0 in the example) and will only listen on the loopback address.

Show the UUID of a filesystem or partition
Show the UUID-based alternate device names of ZEVO-related partitions on Darwin/OS X. Adapted from the lines by dbrady at http://zevo.getgreenbytes.com/forum/viewtopic.php?p=700#p700 and following the disk device naming scheme at http://zevo.getgreenbytes.com/wiki/pmwiki.php?n=Site.DiskDeviceNames

Get your external IP address without curl
Curl is not installed by default on many common distros anymore. wget always is :) $ wget -qO- ifconfig.me/ip

Copy one file to multiple files
Copies file.org to file.copy1 ... file.copyn

power off system in X hours form the current time, here X=2

generate a unique and secure password for every website that you login to
usage: sitepass MaStErPaSsWoRd example.com description: An admittedly excessive amount of hashing, but this will give you a pretty secure password, It also eliminates repeated characters and deletes itself from your command history. tr '!-~' 'P-~!-O' # this bit is rot47, kinda like rot13 but more nerdy rev # this avoids the first few bytes of gzip payload, and the magic bytes.

Route outbound SMTP connections through a addtional IP address rather than your primary


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: