Find installed network devices

sudo lshw -C network
Find installed network devices.
Sample Output
  *-network               
       description: Ethernet interface
       product: 82566MM Gigabit Network Connection
       vendor: Intel Corporation
       physical id: 19
       bus info: pci@0000:00:19.0
       logical name: eth0
       version: 03
       serial: 00:11:22:33:44:55
       capacity: 1GB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=off broadcast=no driver=e1000e driverversion=1.0.2-k2 firmware=0.3-0 latency=0 link=no multicast=yes port=twisted pair
       resources: irq:31 memory:fe200000-fe21ffff memory:fe222000-fe222eee ioport:1840(size=31)
  *-network
       description: Wireless interface
       product: PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: wlan0
       version: 61
       serial: aa:bb:cc:dd:ee
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwlagn ip=192.168.0.100 latency=0 multicast=yes wireless=IEEE 802.11agn
       resources: irq:32 memory:df2fe000-df2ggggg

1
2012-06-07 10:32:49

What do you think?

Any thoughts on this command? Does it work on your machine? Can you do the same thing with only 14 characters?

You must be signed in to comment.

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands



Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: