Get Volume ID (Label) of ISO9660 CD-ROM

dd if=/dev/cdrom bs=1 skip=32808 count=32 conv=unblock cbs=32 2>/dev/null
The comp.unix.shell posting by St?phane Chazelas also lists the following offsets: type 32768 (1 byte) id 32769 (5 bytes) version 32774 (1 byte) system_id 32776 (32 bytes) volume_id 32808 (32 bytes) volume_space_size 32848 (8 bytes) escape_sequences 32856 (32 bytes) volume_set_size 32888 (4 bytes) volume_sequence_number 32892 (4 bytes) logical_block_size 32896 (4 bytes) path_table_size 32900 (8 bytes) type_l_path_table 32908 (4 bytes) opt_type_l_path_table 32912 (4 bytes) type_m_path_table 32916 (4 bytes) opt_type_m_path_table 32920 (4 bytes) root_directory_record 32924 (34 bytes) volume_set_id 32958 (128 bytes) publisher_id 33086 (128 bytes) preparer_id 33214 (128 bytes) application_id 33342 (128 bytes) copyright_file_id 33470 (37 bytes) abstract_file_id 33507 (37 bytes) bibliographic_file_id 33544 (37 bytes) creation_date 33581 (17 bytes) modification_date 33598 (17 bytes) expiration_date 33615 (17 bytes) effective_date 33632 (17 bytes) file_structure_version 33649 (1 byte) application_data 33651 (512 bytes)

0
By: mlk
2013-04-14 20:50:58

These Might Interest You

  • The lspv command displays the information about the physical volume if the specific physical volume name is specified. If you do not add flags to the lspv command, by default all the available physical volumes are printed along with the following information: * Physical disk name. * Physical volume identifiers (PVIDs). * The volume group, if any, that the physical volume belongs to or the label,if any, locked with the lkdev command. * The state of the volume group. Active-When the volume group is varied on. Concurrent-When the volume group is varied on in the concurrent mode. Locked-When the physical volume is locked with the lkdev command. **************************************************************************************** In the example, the iw406 system has two hard disks. Phy disk name Phy vol identfrs (PVIDs) volume group State of Volumne group hdisk0 00f6267c8a99c7b6 rootvg active hdisk1 00f6267cb3746d01 appinstvg active hdisk0 is mounted on volume group rootvg. hdisk1 is mounted on volume group appinstvg Show Sample Output


    -3
    lspv
    kaushalmehra · 2012-09-13 15:20:06 0
  • This command sets the volume for the main PulseAudio "sink" (usually the ALSA output interface) to the maximum, 100% (the 0x10000 in the command). To set it to an arbitrary volume, replace 10000 with the volume you want times 100 (so 75% becomes 7500).


    0
    pacmd set-sink-volume 0 0x10000
    andycandet · 2012-07-17 15:02:56 0
  • This normalizes volume in your mp3 library, but uses mp3gain's "album" mode. This applies a gain change to all files from each directory (which are presumed to be from the same album) - so their volume relative to one another is changed, while the average album volume is normalized. This is done because if one track from an album is quieter or louder than the others, it was probably meant to be that way.


    2
    find . -type f -name '*.mp3' -execdir mp3gain -a '{}' +
    Mikelifeguard · 2010-03-21 22:23:44 0
  • This should automatically mount it to /media/truecrypt1. Further mounts will go to /media/truecrypt2, and so on. You shouldn't need sudo/su if your permissions are right. I alias tru='truecrypt' since tr and true are commands. To explicitly create a mount point do: tru volume.tc /media/foo To make sure an GUI explorer window (nautilus, et al) opens on the mounted volume, add: --explorer To see what you currently have mounted do: tru -l To dismount a volume do: tru -d volume.tc. To dismount all mounted volumes at once do: tru -d Tested with Truecrypt v6.3a / Ubuntu 9.10


    2
    truecrypt volume.tc
    rkulla · 2010-04-14 18:34:09 0

What do you think?

Any thoughts on this command? Does it work on your machine? Can you do the same thing with only 14 characters?

You must be signed in to comment.

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands



Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: