Read all the S.M.A.R.T. data from a hard disk drive

smartctl --attributes /dev/sda

This is to pull all the saved S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) information from a hard drive. This can give you an idea of the nature and extent of an issue on a failing hard drive.

Sample Output

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED     RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   212   186   021    Pre-fail  Always       -       4358
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       97
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   066   066   000    Old_age   Always       -       25420
 10 Spin_Retry_Count        0x0013   100   253   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0013   100   253   051    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       86
194 Temperature_Celsius     0x0022   104   001   000    Old_age   Always       -       46
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0
 ~ #

By: ShadowCat8

2011-10-13 20:21:03

hard drive disk S.M.A.R.T.

Submit An Alternative

What Others Think

avideh · 137 weeks and 4 days ago

Yes, I agree, User Interface, User Experience, and Design are pretty necessary. You should post some more articles related to this topic so that we can brush up our knowledge more and more. https://www.shopmegakaraoke.com/collections/microphones

jiwalox283 · 124 weeks and 3 days ago

I definitely enjoying every little bit of it and I have you bookmarked to check out new stuff you post. shopmegakaraoke.com

jiwalox283 · 124 weeks and 3 days ago

rahimhh21 · 110 weeks and 1 day ago

Perfecthomepugs · 100 weeks and 6 days ago

pugpuppies95 · 63 weeks ago

yeneba6574 · 16 weeks and 4 days ago

What do you think?

Any thoughts on this command? Does it work on your machine? Can you do the same thing with only 14 characters?

You must be signed in to comment.

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Similar Commands

How to copy CD/DVD into hard disk (.iso)

Backup your hard drive with dd

Clone IDE Hard Disk

Check your hard drive for bad blocks (destructive)

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)