Prepending one or more spaces to your command won't be saved in history. Useful for pr0n or passwords on the commandline. Tested on BASH.

cdrecord -scanbus will tell you the (x,y,z) value of your cdr (for example, mine is 3,0,0)

Create a persistent remote Proxy server through an SSH channel.

Search at CommandLineFu.com from your terminal. Get the clfu-seach at http://www.colivre.coop.br/Aurium/CLFUSearch

This command uses mutt to send the mail. You must pipe in a body, otherwise mutt will prompt you for some stuff. If you don't have mutt, it should be dead easy to install.

List the full path of some files. You can add ".*" on the end if you want to display hidden files.

An old USB A/B cable is all you need to make your own Smart Home hardware! Cut off and discard the B-portion of the USB cable. On the A side, connect the RED (+) and WHITE (D-) wires via a 1 kiloohm resistor. $Picture: http://imgur.com/dJGVlAU Now plug the cable into a USB port on your Linux computer. Your hardware is ready! Run the above command after changing variable mysms to your personal email-to-SMS gateway info as required by your cellular service provider. The command uses the amazing usbmon tool (see link below) to detect the cable. For the curious, to view the raw usbmon output, run this command: (Also see the sample output) $usbmon -i usb0 How does it work? When the red and white wires are connected (via the 1 kiloohm resistor) the USB hardwere is tricked into thinking that a new USB device is trying to start up. We then use the usbmon utility to capture the host USB events as it tries to talk to the cable. The expect utility watches the usbmon stream and waits for the disconnect text "-2:128" before sending the SMS message. Finally, the sendmail tool is used to email the SMS message to your smartphone via your cellular provider's SMS-to-email gateway. As a result, when the electrical connection between the red and white wire is interrupted, or the USB cable is unplugged from your computer, you get an SMS notification of the disconnect event on your smartphone. Could this be the cheapest smart home gadget ever? What are YOU going to sense with it? Please let me know in the comments and please don't forget to click it up! $ $Links: $ http://www.linuxcertif.com/man/8/usbmon/ http://en.wikipedia.org/wiki/USB#Pinouts http://imgur.com/dJGVlAU

Useful for finding newly added lines to a file, tail + can be used to show only the lines starting at some offset. A syslog scanner would look at the file for the first time, then record the end_of_file record number using wc -l. Later (hours, days), scan only at the lines that were added since the last scan.

Using this command you can track a moment when usb device was attached.