sudo dmesg

detected hardware and boot messages


-6
2009-08-19 11:06:05

These Might Interest You

  • If you are doing some tests which require reboots (e. g. startup skripts, kernel module parameters, ...), this is very time intensive, if you have got a hardware with a long pre-boot phase due to hardware checks. At this time, kexec can help, which only restarts the kernel with all related stuff. First the kernel to be started is loaded, then kexec -e jumps up to start it. Is as hard as a reboot -f, but several times faster (e. g. 1 Minute instead of 12 on some servers here). Show Sample Output


    21
    /sbin/kexec -l /boot/$KERNEL --append="$KERNELPARAMTERS" --initrd=/boot/$INITRD; sync; /sbin/kexec -e
    olorin · 2009-08-03 07:36:49 2

  • 0
    genisoimage -o bastion-602-jpa.iso -b boot/syslinux/isolinux.bin -c boot/syslinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -r -R .
    leatherface · 2018-03-30 12:54:26 0
  • Yields entries in the form of "/dev/hda1" etc. Use this if you are on a new system and don't know how the storage hardware (ide, sata, scsi, usb - with ever changing descriptors) is connected and which partitions are available. Far better than using "fdisk -l" on guessed device descriptors. Show Sample Output


    13
    hwinfo --block --short
    Schneckentreiber · 2009-04-24 11:13:31 4

  • 0
    genisoimage -o ../squeeze.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -J -R -V disks .
    scantydd · 2013-12-17 06:10:06 0
  • If you don't want your computer to try to boot form a USB stick that used to be used as a boot device (maybe for a live linux distro), you will have to remove the boot loader from your stick other wise the boot will fail each time the device is attached to your PC.


    0
    dd if=/dev/zero of=/dev/sdb bs=446 count=1
    dcabanis · 2009-06-07 10:29:49 1
  • Quickly reboot directly to Windows (or any other operating system) without the need to enter BIOS/UEFI or boot loader (if any). It's valid for one boot only, no persistent changes to boot priorities.


    0
    sudo efibootmgr --bootnext `efibootmgr | sed -n "s/^Boot\([0-9]\{4\}\)\* Windows Boot Manager$/\1/p"` && reboot
    moneytoo · 2014-05-31 11:51:52 0

What do you think?

Any thoughts on this command? Does it work on your machine? Can you do the same thing with only 14 characters?

You must be signed in to comment.

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands



Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: