function setTerm() { PROFILE=${1}; echo "tell app \"Terminal\" to set current settings of first window to settings set \"${PROFILE}\""|osascript; };

OSX script to change Terminal profiles based on machine name; use with case statement parameter matching


-1
By: c3w
2010-03-11 17:35:26

These Might Interest You

  • http://github.com/c3w/ash . a Ruby SSH helper script . reads a JSON config file to read host, FQDN, user, port, tunnel options . changes OSX Terminal profiles based on host 'type' USAGE: put 'ash' ruby script in your PATH modify and copy ashrc-dist to ~/.ashrc configure OSX Terminal profiles, such as "webserver", "development", etc run "ash myhostname" and away you go! v.2 will re-attach to a 'screen' named in your ~/.ashrc Show Sample Output


    -1
    ash prod<tab>
    c3w · 2012-05-12 19:51:02 0
  • script -f /tmp/foo will place all output of the terminal, including carriage returns, to a file. This file can be tail dash-eff'ed by one or more other terminals to display the information of the main terminal. Good way to share one's screen on short notice. Note: This produces a very accurate output, but that includes depending on the size of your terminal to be the same. You can clear screens or even resize the terminal for others using this function; I use it in conjunction with the "mid" command in my list. Show Sample Output


    3
    script -f /tmp/foo; tail -f /tmp/foo
    robinsonaarond · 2011-11-22 15:16:08 2
  • Multi-word parameters in my.cnf can be written with either hyphens or underscores. innodb_file_per_table is the same as innodb-file-per-table, as well as innodb_file-per_table. The script normalizes the parameter names to using underscores only, keeping from changing values (e.g. ?mysql-bin? parameter value should not change).


    0
    cat my.sandbox.cnf | awk -F "=" 'NF < 2 {print} sub("=", "=~placeholder~=") {print}' | awk -F "=~placeholder~=" 'NF < 2 {gsub("-", "_", $0); print} NF==2 {gsub("-", "_", $1); print $1 "=" $2}'
    ShlomiNoach · 2011-07-06 09:35:55 0
  • I actually planned to do this for quite a long time, but since I haven't had any suitable client hardware, I procrastinated this. Now, the old laptop I've got from my dad, features an RS-232 port. So, now that I had technically a client, that I could test my RS-232 connection with, I ordered a null modem cable. There is no RS-232 outlet on my desktop computer directly on the mainboard, but theres a connector on the mainbord, where a RS-232 outlet can be attached to. The outlet will then cover up a PCI slot. # Activating RS-232 Ok, once all cables were in place, I tried to access both RS-232 ports by reading from them directly. They're usually ttyS0 or ttyS1, depending what COM-Port it is. From the file /proc/tty/driver/serial, information about the serial setup can be obtained. A setserial -q /dev/ttyS0 might be usefull as well. Usually, the UART Type is 16550A, on a standard PC. Mine wasn't working though. At leas not right from the start, when I tried to read the interface with cat /dev/ttyS0 I got the following error: # cat /dev/ttyS0 cat: /dev/ttyS0: Input/output error Obviously, the driver couldn't activate the hardware. Reason was, it was deactivated in BIOS. After activating RS-232 there, it worked well. As a last action, I added myself to the uucp group, so I have user permission to the serial lines. It is not necessary for the terminal setup, but a good idea to do so, just for future projects, maybe... # Setting up a terminal Once the Serial line is configured and working properly, it's time to let a terminal run on that port. This is what I added to my /etc/inittab : s0:2345:respawn:/sbin/agetty -L 38400 ttyS0 I added it quite on the top of that file, right below the 'si' statement, mingetty cannot be used for serial connections, it cannot be run in a console, too. I tried it for testing purposes, but the cosole - along with your login program - will log you out, as soon as you log in over your serial line. '-L' means this is a local line, with no carrier signal. 38400 is the standard speed of a Linux console, it might be a bit high, I was told, but it works well. I tested that with some higher values as well (115200) and it worked too, I guess it tepends on things like cable length, etc. Last parameter, is the serial tty to listen on. The terminal type can be specified as an additional parameter at the end of the parameter list, vt102, for instance. This is sometimes required, depending on the client. After finishing editing /etc/inittab, an init q will make the system re-read /etc/inittab and apply changes. The agetty should now be listening on ttyS0. #Setting up a client It's time to establish a connection and test the serial line. I use a laptop, that has an RS-232 port, so some preliminary setup is required. I tried minicom as terminal initially, but it turned out, not to be the best client. It initializes the modem, this lasts quite long, and it doesn't convey ANSI colors. So the better option is cu, it's part of the UUCP-Package. Oh, and the serial port of that computer, has to be accessible as well, of course. Once everything was set up, I established the connection: cu -l ttyS0 -38400 --nostop Pretty self explanatory, I think. The --nostop option disables XON/XOFF handling. # root access over ttyS0 In order to become root over the serial terminal, the tty needs to be added to /etc/securetty I appended ttyS0 to the end of the file. It is now possible, to gain root access over the serial terminal. The agetty process needs to be restarted to apply changes. # Accessing GRUB over ttyS0 To make bootloader access possible over ttyS0, some changes to /boot/grub/menu.lst need to be done. (GRUB is the bootloader I use, I suppose LiLo has similar capabilities.) Those are the lines, I appended to the top of my menu.lst : serial --unit=0 --speed=38400 --word=8 --parity=no --stop=1 terminal --timeout=3 serial console The serial command initiates the serial terminal option, --unit=0 defines our first serial connector, I my case, it's the only one I have on my machine. I used the standard Linux-Console speed, as well as the "8N1" connection strategy. terminal defines the terminal priorities, first terminal (serial) is the standard one, the last one is the secondary terminal (console). --timeout=3 enables a delay on both consoles, with a prompt for a keystroke. Depending on which terminal, the key is pressed, this terminal, will be used. If no key is pressed after the timeout, the standard console (in my case serial) will be used. # Relaying Kernel output on boot The Kernel accepts multiple console options, of which the last one, is the standard console, and the one that will be used in Single User mode. These are my Kernel options: title Fedora Core (2.6.20-1.2316.fc5) root (hd0,0) kernel /vmlinuz-2.6.20-1.2316.fc5 ro root=/dev/VolGroup00/LogVol00 rhgb quiet vga=795 console=tty0 console=ttyS0,38400 initrd /initrd-2.6.20-1.2316.fc5.img console=tty0 is the standard console, located on the machine, i.e. monitor and keyboard.


    2
    setserial -q /dev/ttyS0
    0disse0 · 2012-02-08 20:44:09 0
  • The command (above) will remove any duplicate rows based on the FIRST column of data in an un-sorted file. The '$1' represents a positional parameter. You can change both instances of '$1' in the command to remove duplicates based on a different column, for instance, the third: awk '{ if ($3 in stored_lines) x=1; else print; stored_lines[$3]=1 }' infile.txt > outfile.txt Or you can change it to '$0' to base the removal on the whole row: awk '{ if ($0 in stored_lines) x=1; else print; stored_lines[$0]=1 }' infile.txt > outfile.txt ** Note: I wouldn't use this on a MASSIVE file, unless you're RAM-rich ;) **


    4
    awk '{ if ($1 in stored_lines) x=1; else print; stored_lines[$1]=1 }' infile.txt > outfile.txt
    dopeman · 2010-12-15 17:08:47 0
  • Finds the line number matching the regex, then passes that to BC for some math, passes that to head, and uses tail to trim off the unwanted section at the top. The whole thing is spit out to a script that can then be shared or run. Comes in handy for reading select sections from error logs.


    -2
    for i in `grep -n "SomeRegEx" foo.txt | sed 's/:/ /' | awk '{print $1}'`; do echo "head -n `echo "$i+4" | bc` foo.txt | tail -n 5"; done > headsandtails.sh
    reklis · 2010-07-01 05:48:02 2

What do you think?

Any thoughts on this command? Does it work on your machine? Can you do the same thing with only 14 characters?

You must be signed in to comment.

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands



Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: