Commands by KayGasaway (0)

  • bash: commands not found

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

Set laptop display brightness
Run as root. Path may vary depending on laptop model and video card (this was tested on an Acer laptop with ATI HD3200 video). $ cat /proc/acpi/video/VGA/LCD/brightness to discover the possible values for your display.

Convert CSV to JSON
Replace 'csv_file.csv' with your filename.

Create subversion undo point
Allows you to save progress without committing. To revert to an undo point, svn revert then apply the undo point with patch. $ svn revert -R . && patch -p0 < .undo/2009-03-27_08:08:11rev57 Similar: http://www.commandlinefu.com/commands/view/373/archive-all-files-containing-local-changes-svn

Apply substitution only on the line following a marker
I've been auto-generating some complex GnuPlots; with multiplots the first plot of each group needs to be a 'plot' whereas the others need to be 'replots' to allow overplotting/autoscaling/etc to work properly. This is used to replace only the first instance of 'replot'.

Convert A USB Cable Into A Smart Home Gadget
An old USB A/B cable is all you need to make your own Smart Home hardware! Cut off and discard the B-portion of the USB cable. On the A side, connect the RED (+) and WHITE (D-) wires via a 1 kiloohm resistor. $Picture: http://imgur.com/dJGVlAU Now plug the cable into a USB port on your Linux computer. Your hardware is ready! Run the above command after changing variable mysms to your personal email-to-SMS gateway info as required by your cellular service provider. The command uses the amazing usbmon tool (see link below) to detect the cable. For the curious, to view the raw usbmon output, run this command: (Also see the sample output) $usbmon -i usb0 How does it work? When the red and white wires are connected (via the 1 kiloohm resistor) the USB hardwere is tricked into thinking that a new USB device is trying to start up. We then use the usbmon utility to capture the host USB events as it tries to talk to the cable. The expect utility watches the usbmon stream and waits for the disconnect text "-2:128" before sending the SMS message. Finally, the sendmail tool is used to email the SMS message to your smartphone via your cellular provider's SMS-to-email gateway. As a result, when the electrical connection between the red and white wire is interrupted, or the USB cable is unplugged from your computer, you get an SMS notification of the disconnect event on your smartphone. Could this be the cheapest smart home gadget ever? What are YOU going to sense with it? Please let me know in the comments and please don't forget to click it up! $ $Links: $ http://www.linuxcertif.com/man/8/usbmon/ http://en.wikipedia.org/wiki/USB#Pinouts http://imgur.com/dJGVlAU

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Get Cookies from bash
The loop is to compare cookies. You can remove it... Maybe you wanna use curl... $ curl www.commandlinefu.com/index.php -s0 -I | grep "Set-Cookie"

a function to find the fastest DNS server
http://public-dns.info gives a list of online dns servers. you need to change the country in url (br in this url) with your country code. this command need some time to ping all IP in list.

Find usb device in realtime
Using this command you can track a moment when usb device was attached.

Delete leading whitespace from the start of each line
Removes any whitespace characters at the beginning of a line.


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: