All commands sorted by votes

All commands (14,187)

sorted by

Get info `iostat -En` for all disks with Hardware Errors - works on Solaris and Solaris forks

This helps quickly get information for each disk that is seemingly having hardware issues.
This is sample output - yours may be different.
-1

iostat -En $(iostat -en|grep c#t|awk '$2 > 0 {print $NF}')

unixmonkey28207 · 2011-12-09 15:54:28 4
Disk usage skipping mount points (even top-level ones)

Other solutions that involve doing du -sx /* are incomplete because they will still descend other top-level filesystems are that mounted directly at "/" because the * expands to explicitly include all files and directories in "/", and du will still traverse them even with -x because you asked it to by supplying the directory name as a parameter (indirectly via "*"). Show Sample Output
This is sample output - yours may be different.
```
4.0K    /mnt
4.0K    /srv
8.0K    /media
16K     /lost+found
7.4M    /etc
25M     /home
83M     /boot
219M    /root
766M    /tmp
2.7G    /usr
8.3G    /opt
11G     /var
```
-1

for a in /*; do mountpoint -q -- "$a" || du -shx "$a"; done | sort -h

dmmst19 · 2024-02-28 01:43:19 54
Generate a GIF image from video file

The 30 means start extracting frames from 30 seconds into the video. The 3 means extract the next 3 seconds from that point. The fps can be adjusted based on your preferences. The 320 is the width of the gif, the height will be calculated automatically. input.mp4 is the video file, which can be any video file ffmpeg supports. The output.gif is the gif created.
This is sample output - yours may be different.
-1

ffmpeg -ss 30 -t 3 -i input.mp4 -vf "fps=10,scale=320:-1:flags=lanczos,split[s0][s1];[s0]palettegen[p];[s1][p]paletteuse" -loop 0 output.gif

keyboardsage · 2024-03-19 00:34:23 48
do a release upgrade in ubuntu

release upgrades are major upgrades as from 8.04 to 8.10 or from 8.10 to 9.04 update-manager-core must be installed: sudo apt-get install update-manager-core in some cases you must edit '/etc/update-manager/release-upgrades' and set 'Prompt=normal'
This is sample output - yours may be different.
-1

do-release-upgrade

dizzgo · 2009-03-25 07:25:33 14
full text(CJK) search mails and link the result to $MAILDIR/bingo/cur/
This is sample output - yours may be different.
-1

recoll -t -q "keyword" | grep message/rfc822 | sed -s 's,^.*$'$MAILDIR'[^]]*$\].*$,\"\1\",' | xargs ln -sft $MAILDIR/bingo/cur/

s5unty · 2011-12-09 17:22:51 3
Move itens from subdirectories to current directory

You WILL have problems if the files have the same name. Use cases: consolidate music library and unify photos (especially if your camera separates images by dates). After running the command and verifying if there was no name issues, you can use ls -d */ | sed -e 's/^/\"/g' -e 's/$/\"/g' | xargs rm -r to remove now empty subdirectories.
This is sample output - yours may be different.
-1

ls -d */* | sed -e 's/^/\"/g' -e 's/$/\"/g' | xargs mv -t $(pwd)

leovailati · 2010-03-01 23:43:26 6
calculate in commandline with dc

Us dc instead of bc. RPN FTW!!! Show Sample Output
This is sample output - yours may be different.
```
2
```
-1

dc -e "1 1 + p"

stubby · 2010-08-08 23:14:30 3
Quickly find files and folders in the current directory

These should be a little faster since they don't have to spawn grep.
This is sample output - yours may be different.
-1

ff() { find -maxdepth 3 -type f -iname "$1"; }; fd() { find -maxdepth 4 -type d -iname "$1"; }

plasticboy · 2012-08-15 15:04:48 3
Merge only certain pdfs in a directory
This is sample output - yours may be different.
-1

gs -dNOPAUSE -sDEVICE=pdfwrite -sOUTPUTFILE=merged.pdf -dBATCH `ls | grep foo`

Arasithil · 2014-09-19 16:00:32 8
calculate in commandline with perl
This is sample output - yours may be different.
-1

perl -e 'print 1+1 ."\n";'

stubby · 2010-08-08 23:19:10 3
Use socat to create a largefile
This is sample output - yours may be different.
-1

echo | socat -u - file:/tmp/swapfile,create,largefile,seek=10000000000000

madrasi · 2011-02-08 00:30:38 4
Find and delete thunderbird's msf files to make your profile work quickly again.

The thunderbird message datastores get corrupt some times causing random failures, compaction to fail and general suck in thunderbird. Removing them causes thunderbird to rebuild the indexes and makes things quick again.
This is sample output - yours may be different.
-1

find ~/.thunderbird/*.default/ -name *.msf | sed 's/ /\\ /g' | xargs rm {} \;

allrightname · 2010-06-04 12:35:24 6
delete duplicate files
This is sample output - yours may be different.
-1

fdupes -rdN $folder

markussesser · 2011-06-03 06:24:02 5
Convert a PKCS#8 private key to PEM format
This is sample output - yours may be different.
-1

openssl pkcs8 -inform DER -nocrypt -in [priv key] -out [pem priv key]

wwest4 · 2009-02-05 16:52:34 20
Get your external IP address with the best commandlinefu.com command

This command uses the top voted "Get your external IP" command from commandlinefu.com to get your external IP address. Use this and you will always be using the communities favourite command. This is a tongue-in-cheek entry and not recommended for actual usage.
This is sample output - yours may be different.
-1

eval $(curl -s http://www.commandlinefu.com/commands/matching/external/ZXh0ZXJuYWw=/sort-by-votes/plaintext|sed -n '/^# Get your external IP address$/{n;p;q}')

jgc · 2009-11-04 16:58:31 6
Identify a PKCS#8 Private Key

a pkcs8 key will have integer 00 at offset 4 and an rsaEncryption object at offset 9
This is sample output - yours may be different.
-1

openssl ans1parse -inform DER < [priv key]

wwest4 · 2009-02-05 16:54:19 18
Remap "New Folder" to Command+N, "New Finder Window" to Cmd+Shift+N in Mac OS X

In Mac OS 9, the "New Folder" keyboard shortcut was Command+N, but in Mac OS X this was changed to "New Finder Window" instead, with "New Folder" taking the more awkward shortcut of Command+Shift+N. This command reverses their mappings.
This is sample output - yours may be different.
-1

defaults write com.apple.finder NSUserKeyEquivalents -dict 'New Finder Window' '@$N' 'New Folder' '@N'; killall Finder

Vulpine · 2009-02-17 23:20:53 7
perl find and replace
This is sample output - yours may be different.
-1

find -name ".php" -exec perl -pi -e 's/search/replace/g/' {} \;

unixmonkey8504 · 2010-03-02 14:18:44 3
Push each of your local git branches to the remote repository
This is sample output - yours may be different.
-1

git push origin --all

JustinCampbell · 2011-06-03 17:55:53 5
Remove annotation- (or other own-lined) tags from an XML document

Removes all lines between the lines containing "" and "", including these lines itself Backdrop: Sometimes when working with XML files without an graphical editor, large comment-/annotation-blocks taper the readability to walk through the file. I like to create a copy of such documents without these annotations. As the documentation itself is in documentation tags inside the annotation tags an therefore graphical editors tend to put the annotation tags in their own lines, this command removes all documentations within annotation-tags. Show Sample Output
This is sample output - yours may be different.
```
transforms:

<xsd:attribute name="version" type="xsd:string" use="required" fixed="1.0">
    <xsd:annotation>
        <xsd:documentation>This attribute denotes the version number ot the utilized XML-schema.</xsd:documentation>
    </xsd:annotation>
</xsd:attribute>

into:

<xsd:attribute name="version" type="xsd:string" use="required" fixed="1.0">
</xsd:attribute>
```
-1

awk "/<xsd:annotation>/{h=1};!h;/<\/xsd:annotation>/{h=0}" annotatedSchema.xsd

2chg · 2011-07-15 07:17:17 7
Find default gateway

Find your default gateway and print it directly output. http://www.bayner.com/ kerim@bayner.com Show Sample Output
This is sample output - yours may be different.
```
192.168.1.1
```
-1

ip route show | awk '$3 ~ /^[1-9]+/ {print $3;}'

kerim · 2010-08-08 23:57:23 3
Do one ping to a URL, I use this in a MRTG gauge graph to monitor connectivity

Does one ping to a URL or host, and echo out just the response time. I use this on, with MRTG to monitor the connections to various hosts. Show Sample Output
This is sample output - yours may be different.
```
12.304
```
-1

ping -c 1 www.google.com | /usr/bin/awk '{print $7}' | /usr/bin/awk 'NR > 1' | /usr/bin/awk 'NR < 2' | /usr/bin/awk -F"=" '{print $2}'

ackers · 2010-12-15 08:50:52 4
Count messages in mcabber history for each JID
This is sample output - yours may be different.
-1

for f in ~/.mcabber/histo/*; do a=`egrep "^(MR|MS)" $f | wc -l`; echo $f: $a | awk -F\/ '{print $6}'; done

aluminiumgeek · 2011-06-04 10:51:49 3
extend KVM image size
This is sample output - yours may be different.
-1

dd bs=1 if=/dev/zero of=/path/to/imagename.raw seek=50G count=1 conv=notrunc

altern · 2011-07-15 09:54:26 3
rename all images in folder with original date time from exif data

for filename multilingual (ex.japanese, chinese, ...etc)
This is sample output - yours may be different.
-1

c=1; for i in *; do identify -verbose $i | perl -ane 'if(/exif:DateTimeOriginal:/){print "@F[1,2] "}'; ls -i $i; done | sort | perl -ane 'print "@F[2]\n"' | while read j; do find -inum $j | xargs -iX cp X NEW_`printf %02d $c`.jpg; cnt=`expr $c + 1`; done

huzioka · 2015-09-22 19:06:43 11
‹ First < 482 483 484 485 486 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Find broken symlinks and delete them

If you don't want to delete them, but just want to list them, do $ find -L /path -type l If you want to delete them with confirmation first, do $ find -L /path -type l -exec rm -i {} + Using the -L flag follows symlinks, so the -type l test only returns true if the link can't be followed, or is a symlink to another broken symlink.

List processes sorted by CPU usage

Show the UUID of a filesystem or partition

Shows the UUID of the given partition (here /dev/sda7). Doesn't need to be root.

posts an xml file to a webservice with curl

Use top to monitor only all processes with the same name fragment 'foo'

top accecpts a comma separated list of PIDs.

Url Encode

It only encodes non-Basic-ASCII chars, as they are the only ones not well readed by UTF-8 and ISO-8859-1 (latin-1). It converts all * C3 X (some latin symbols like ASCII-extended ones) and * C2 X (some punctuation symbols like inverted exclamation) ...UTF-8 double byte symbols to escaped form that every parser understands to form the URLs. I didn't encode spaces and the rest of basic punctuation, but supposedly, space and others are coded as \x20, for example, in UTF-8, latin-1 and Windows-cp1252.... so its read perfectly. Please feel free to correct, the application to which I designe that function works as expected with my assumption. Note: I specify a w=999, I didn't find a flag to put unlimited value. I just suppose very improbable surpass the de-facto 255 (* 3 byte max) = 765 bytes length of URL

Replace spaces in filenames with underscorees

Disassemble some shell code

This one liner takes the shell code that you can grab off of the web and disassemble it into readable assembly so you can validate the code does what it says, before using it. The shell code in the above example is from http://www.shell-storm.org/shellcode/files/shellcode-623.php You can replace "-s intel" with "-s att" to get AT&T format disassembly.

Generate trigonometric/log data easily

Increase SCT of external USB disk enclosure to one hour.

So I had this 2TB Seagate external disk/USB enclosure which by default would spin-down its internal drive (it enters a standby mode) after four minutes of inactivity.. Spinning-up the inactive drive was an annoying delay when accessing files and also it severely interfered with NFS.. SCT stands for "Standby Condition Timer". To completely disable SCT: $ sdparm --clear STANDBY -6 /dev/sdb To return to original (default) SCT settings: $ sdparm -D -p 0x1a -6 /dev/sdb To verify the settings (before and after): $ sdparm -a /dev/sdb No need for vendor-provided MSWIN tools, etc.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by