Commands using ssh sorted by votes

Commands using ssh (347)

sorted by

To generate ssh keypair(public, private) which makes use of dsa as encryption algorithm
This is sample output - yours may be different.
-1

ssh-keygen -t dsa -b 1024

unixmonkey45082 · 2013-01-04 08:26:26 3
Compare a remote file with a local file

Or, if you have restricted access for sftp only, I think you can still do this: diff /path/to/localfile <(scp user@host:/path/to/remotefile >(cat))
This is sample output - yours may be different.
-1

diff /path/to/localfile <(ssh user@host cat /path/to/remotefile)

mc0e · 2013-05-24 09:24:31 8
Keep SSH tunnel open (PostgreSQL example)

Check if SSH tunnel is open and open it, if it isn't. NB: In this example, 3333 would be your local port, 5432 the remote port (which is, afaik, usually used by PostgreSQL) and of course you should replace REMOTE_HOST with any valid IP or hostname. The example above let's you work on remote PostgreSQL databases from your local shell, like this: psql -E -h localhost -p 3333
This is sample output - yours may be different.
-1

while true; do nc -z localhost 3333 >|/dev/null || (ssh -NfL 3333:REMOTE_HOST:5432 USER@REMOTE_HOST); sleep 15; done

rxw · 2015-09-21 02:25:49 11
Run Remote GUI Programs Using SSH Forwarding

Run GUI apps on another machine remotely through SSH. -C is for data compression and -X enables X11 forwarding.
This is sample output - yours may be different.
-2

ssh -C -X user@remotehost gui_command

sharfah · 2009-05-21 17:52:24 7
Forward connections

Forward connections to $HOSTNAME:8080 out to $HOST:80
This is sample output - yours may be different.
-2

ssh -g -L 8080:localhost:80 root@$HOST

kayowas · 2009-10-24 20:56:00 3
Automatd ssh public key setup without ssh-copy-id

Some servers don't have ssh-copy-id, this works in those cases. It will ask for the destination server, this can be IP, hostname, or user@hostname if different from current user. Ssh keygen will let you know if a pubkey already exists on your system and you can opt to not overwrite it.
This is sample output - yours may be different.
-2

echo 'Host or User@Host?:'; read newserver && ssh-keygen -N "" -t rsa -f ~/.ssh/id_rsa ; ssh $newserver cat <~/.ssh/id_rsa.pub ">>" ~/.ssh/authorized_keys ; ssh $newserver

alf · 2010-05-07 06:24:53 4
tail a log over ssh
This is sample output - yours may be different.
-2

ssh remotebox tail -f /var/log/remotelog

netaxiz · 2011-12-13 17:35:54 3
Forward remote server CUPS port to localhost
This is sample output - yours may be different.
-2

ssh -NL 12345:localhost:631 username@remote_server

shawn_abdushakur · 2014-02-25 15:49:34 6
having root on server, add user's public key to his keys (no password required)
This is sample output - yours may be different.
-2

cat user_public_key.pub | ssh root@<host> "cat | su -c 'mkdir -m 700 -p ~/.ssh && cat >> ~/.ssh/authorized_keys && chmod 600 ~/.ssh/authorized_keys' <user>"

noisy · 2016-05-09 08:48:40 14
How to run a specific command in remote server by ssh

Once it is connected to the remote server by that ssh protocol,the mentioned command will start working on that server.
This is sample output - yours may be different.
-3

ssh user@remotehost [anycommand](i.e uptime,w)

unixbhaskar · 2009-08-29 04:27:37 7
unzip file on local machine copy to remote machine with ssh

It is an easy method unzip a file and copy it to remote machine. No unziped file on local hard drive Show Sample Output
This is sample output - yours may be different.
```
$ gzip -cd file.gz | ssh twfcc@myhost 'dd of=~/junk'
0+1 records in
0+1 records out
6 bytes transferred in 0.222 secs (27 bytes/sec)
$ 
```
-3

gzip -cd file.gz | ssh user@host 'dd of=~/file'

twfcc · 2010-09-20 11:44:19 3
ssh Publickey auf remote Rechner anh?ngen
This is sample output - yours may be different.
-3

cat .ssh/id_rsa.pub | ssh user@server "cat >>.ssh/authorized_keys2"

chrrr · 2011-10-13 09:08:57 4
show you the time when you lost the remote server.

Run this within a steady screen session. You can get the approximate time when the remote server went down or other abnormal behavior.
This is sample output - yours may be different.
-3

ssh remotehosts;date

kiiwii · 2012-11-09 01:14:24 4
Copy ssh keys to user@host to enable password-less ssh logins.
This is sample output - yours may be different.
-3

ssh-copy-id [-i [identity_file]] [user@]machine

www · 2012-12-08 19:48:19 6
copy public key

for passwordless login
This is sample output - yours may be different.
-4

cat .ssh/id_rsa.pub | ssh user@server 'cat >> ~/.ssh/authorized_keys2'

er0k · 2012-07-12 15:42:10 97
Execute sudo command remotely with ssh

This command will ask for remote sudo password before executing a remote command.
This is sample output - yours may be different.
-4

ssh -t myserver.org 'sudo ls /etc'

patko · 2013-04-09 04:23:37 10
3 Simple Steps to X11 Forward on Mac OS X

To start X11 display only on your local machine: xeyes & Extensions to basic command: ssh -X -f user@remotehost xcalc -bg black -fg green
This is sample output - yours may be different.
-5

ssh -X johndoe@123.456.789

evandrix · 2011-05-19 21:28:25 4
Running applications require X in ssh

One time you logged in, you can prove these method just writing "firefox".
This is sample output - yours may be different.
-6

ssh -X -l user 192.168.1.25

xmuda · 2013-04-30 13:48:28 6
dd and ssh

waste the band width Show Sample Output
This is sample output - yours may be different.
```
none
```
-7

dd if=/dev/zero bs=1M | ssh somesite dd of=/dev/null

vbs100 · 2009-02-11 13:03:14 18
Cute, but we already had this figured out when the Linux kids were still slurping down log-sized spliffs in the back of the microbus.

put down the joint and rtfm :)
This is sample output - yours may be different.
-7

ssh-keygen -R hostname

jritorto · 2009-07-16 15:41:33 4
analyze traffic remotely over ssh w/ wireshark

This allows you to display the wireshark program running on remote pc to your local pc.
This is sample output - yours may be different.
-8

sudo ssh -Y remoteuser@remotehost sudo wireshark

Code_Bleu · 2010-01-05 14:35:20 3
use .ssh file to login the server

use .ssh file to login the server
This is sample output - yours may be different.
-8

ssh root@172.16.1.99 -i my_openssh_key.ssh -p 9999

motopig · 2013-03-10 12:37:19 6
‹ First < 12 13 14

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

exec chmod to subfiles

Using `-exec cmd {} +` causes find to build the command using all matching filenames before execution, rather than once per file.

List the URLs of tabs of the frontmost Chrome window in OS X

This also works with Safari if you just change the application name. Replace $ window 1 with $ windows to list the URLs of tabs in all windows instead of only the frontmost window. This also includes titles: $ osascript -e{'set o to""','tell app"google chrome"','repeat with t in tabs of window 1','set o to o&url of t&"\n"&" "&title of t&"\n"',end,end}|sed \$d .

Gets the last string of previous command with !$

It helps you save a lot of writing :-)

Backup with versioning

Apart from an exact copy of your recent contents, also keep all earlier versions of files and folders that were modified or deleted. Inspired by EVACopy http://evacopy.sourceforge.net

get delicious bookmarks on your shell (text version :-))

a variation of avi4now's command - thanks by the way!

Create executable, automountable filesystem in a file, with password!

This is just a proof of concept: A FILE WHICH CAN AUTOMOUNT ITSELF through a SIMPLY ENCODED script. It takes advantage of the OFFSET option of mount, and uses it as a password (see that 9191? just change it to something similar, around 9k). It works fine, mounts, gets modified, updated, and can be moved by just copying it. USAGE: SEE SAMPLE OUTPUT The file is composed of three parts: a) The legible script (about 242 bytes) b) A random text fill to reach the OFFSET size (equals PASSWORD minus 242) c) The actual filesystem Logically, (a)+(b) = PASSWORD, that means OFFSET, and mount uses that option. PLEASE NOTE: THIS IS NOT AN ENCRYPTED FILESYSTEM. To improve it, it can be mounted with a better encryption script and used with encfs or cryptfs. The idea was just to test the concept... with one line :) It applies the original idea of http://www.commandlinefu.com/commands/view/7382/command-for-john-cons for encrypting the file. The embedded bash script can be grown, of course, and the offset recalculation goes fine. I have my own version with bash --init-file to startup a bashrc with a well-defined environment, aliases, variables.

Execute a command with a timeout

In this example the command "somecommand" will be executed and sent a SIGALARM signal if it runs for more than 10 seconds. It uses the perl alarm function. It's not 100% accurate on timing, but close enough. I found this really useful when executing scripts and commands that I knew might hang E.g. ones that connect to services that might not be running. Importantly this can be used within a sequential script. The command will not release control until either the command completes or the timeout is hit.

list block devices

Shows all block devices in a tree with descruptions of what they are.

Convert .flv to .3gp

Download YouTube videos as .flv and convert them to .3gp for your mobile phone.

Find usb device

I often use it to find recently added ou removed device, or using find in /dev, or anything similar. Just run the command, plug the device, and wait to see him and only him

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using ssh

Commands using ssh (347) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using ssh (347)

sorted by