All commands (14,187)

  • Remove trailing whitespaces (or tabs) from a text file

    This command is useful when you are programming, for example.


    -1
    sed -i 's/[ \t]\+$//g' file.txt
    elder · 2011-09-07 01:47:44 9
  • Show all groups user is a member of and other useful info


    -1
    net user USERNAME /domain
    shawn_abdushakur · 2014-01-02 20:22:46 7
  • my command for downloading delicious web links,

    just a alternative using a saved html file of all of my bookmarks. works well although it takes awhile.


    -1
    wget -r --wait=5 --quota=5000m --tries=3 --directory-prefix=/home/erin/Documents/erins_webpages --limit-rate=20k --level=1 -k -p -erobots=off -np -N --exclude-domains=del.icio.us,doubleclick.net -F -i ./delicious-20090629.htm
    bbelt16ag · 2009-07-02 01:46:21 7
  • CPU architecture details

    It works in every linux box Show Sample Output


    -1
    cat /proc/cpuinfo
    magicjohnson_ · 2010-09-24 09:27:58 3
  • OSX Terminal helper with tab completion, ssh tunneling, and now screen re-attach

    http://github.com/c3w/ash . a Ruby SSH helper script . reads a JSON config file to read host, FQDN, user, port, tunnel options . changes OSX Terminal profiles based on host 'type' USAGE: put 'ash' ruby script in your PATH modify and copy ashrc-dist to ~/.ashrc configure OSX Terminal profiles, such as "webserver", "development", etc run "ash myhostname" and away you go! v.2 will re-attach to a 'screen' named in your ~/.ashrc Show Sample Output


    -1
    ash prod<tab>
    c3w · 2012-05-12 19:51:02 8
  • ls


    -1
    ls
    yingkailiang · 2013-03-14 01:28:01 5
  • check your up to date delicious links.

    This commands queries the delicious api then runs the xml through xml2, grabs the urls cuts out the first two columns, passes through uniq to remove duplicates if any, and then goes into linkchecker who checks the links. the links go the blacklist in ~/.linkchecker/blacklist. please see the manual pages for further info peeps. I took me a few days to figure this one out. I how you enjoy it. Also don't run these api more then once a few seconds you can get banned by delicious see their site for info. ~updated for no recursive Show Sample Output


    -1
    curl -k https://Username:Password@api.del.icio.us/v1/posts/all?red=api | xml2| \grep '@href' | cut -d\= -f 2- | sort | uniq | linkchecker -r0 --stdin --complete -v -t 50 -F blacklist
    bbelt16ag · 2013-05-04 17:43:21 8
  • Find all files containing a word

    This is very similar to the first example except that it employs the 'exec' argument of the find command rather than piping the result to xargs. The second example is nice and tidy but different *NIXs may not have as capable a grep command.


    -1
    find . -name "*.php" -exec grep -il searchphrase {} \;
    unixmonkey7797 · 2010-01-16 05:09:30 4
  • identify big file

    first 10 big file


    -1
    du -s * | sort -nr | head
    chenge · 2010-05-13 12:21:22 4
  • Timelapse with ffmpeg (after symlinking pictures as per ffmpeg FAQ)


    -1
    ffmpeg -r 12 -i img%03d.jpg -sameq -s hd720 -vcodec libx264 -crf 25 OUTPUT.MP4
    brainstorm · 2013-05-04 18:46:36 9
  • hardcode dnsserver, no more rewriting of etc/resolv.conf

    The while loop is an overkill, it would be simpler to prevent the file to be modified. That said, none of the proposed solutions are such: a real one would go to the source of the problem.


    -1
    chkmod -w /etc/resolve.conf
    ntropia · 2018-05-14 16:25:47 158
  • Edit all files found having a specific string found by grep

    Make sure that find does not touch anything other than regular files, and handles non-standard characters in filenames while passing to xargs.


    -1
    find . -type f -exec grep -qi 'foo' {} \; -print0 | xargs -0 vim
    arcege · 2009-09-03 17:55:26 7
  • Pear install behind proxy

    Useful since "export http_proxy=blahblah:8080" doesn't seem to work with pear Show Sample Output


    -1
    pear config-set http_proxy http://myusername:mypassword@corporateproxy:8080
    KoRoVaMiLK · 2010-05-13 14:44:03 30
  • know which version of the program is installed on your Debian and derivatives

    Output: Version 3.2-0 (for example if you type # aptitude show bash | grep Vers Depends on the language of your distribution, because the name of the word "Version" in other languages may be different.


    -1
    aptitude show $PROGRAM | grep Vers
    aabilio · 2009-02-27 23:24:37 8
  • Get minimum, current, maximum possible resolution of Xorg


    -1
    xrandr -q | grep -w Screen
    hemanth · 2010-02-14 15:38:49 3
  • split a postscript file

    splits a postscript file into multiple postscript files. for each page of the input file one output file will be generated. The files will be numbered for example 1_orig.ps 2_orig.ps ... The psselect commad is part of the psutils package


    -1
    file=orig.ps; for i in $(seq `grep "Pages:" $file | sed 's/%%Pages: //g'`); do psselect $i $file $i\_$file; done
    damncool · 2010-09-24 19:44:32 4
  • A simple overview of memory usage refreshed at user designated intervals.

    This command shows a high level overview of system memory and usage refreshed in seconds. Change -n 10 to you desired refresh interval. Show Sample Output


    -1
    watch -n 10 free -m
    Darkstar · 2014-01-04 10:10:15 12
  • Find the full path of an already running process

    Uses the pid to get the full path of the process. Useful when you do not which command got picked from the path Show Sample Output


    -1
    readlink -f /proc/<pid>/cmdline
    naseer · 2009-05-26 10:09:03 23
  • Filenames ROT13

    This got a bit complicated, because I had to introduce an additional dot at the end that has to be removed again later.


    -1
    for each in *; do file="$each."; name=${file%%.*}; suffix=${file#*.}; mv "$each" "$(echo $name | rot13)${suffix:+.}${suffix%.}"; done
    hfs · 2010-03-20 16:11:12 6
  • Sort files in $PWD by year embedded anywhere in filename


    -1
    ls --color=never -1| grep -E "[0-9]{4}"|sed -re "s/^(.*)([0-9]{4})(.*)$/\2 \1\2\3/" | sort -r
    ysangkok · 2014-01-04 20:50:12 9
  • display only tcp


    -1
    netstat -4tnape
    gnuyoga · 2009-05-26 11:50:52 5
  • wget, tar xzvf, cd, ls

    Combines a few repetitive tasks when compiling source code. Especially useful when a hypen in a file-name breaks tab completion. 1.) wget source.tar.gz 2.) tar xzvf source.tar.gz 3.) cd source 4.) ls From there you can run ./configure, make and etc. Show Sample Output


    -1
    wtzc () { wget "$@"; foo=`echo "$@" | sed 's:.*/::'`; tar xzvf $foo; blah=`echo $foo | sed 's:,*/::'`; bar=`echo $blah | sed -e 's/\(.*\)\..*/\1/' -e 's/\(.*\)\..*/\1/'`; cd $bar; ls; }
    oshazard · 2010-01-17 11:25:47 3
  • Split a file into equal size chunks and archive to (e)mail account.

    This is just a little snippit to split a large file into smaller chunks (4mb in this example) and then send the chunks off to (e)mail for archival using mutt. I usually encrypt the file before splitting it using openssl: openssl des3 -salt -k <password> -in file.tgz -out file.tgz.des3 To restore, simply save attachments and rejoin them using: cat file.tgz.* > output_name.tgz and if encrypted, decrypt using: openssl des3 -d -salt -k <password> -in file.tgz.des3 -out file.tgz edit: (changed "g" to "e" for political correctness)


    -1
    split -b4m file.tgz file.tgz. ; for i in file.tgz.*; do SUBJ="Backup Archive"; MSG="Archive File Attached"; echo $MSG | mutt -a $i -s $SUBJ YourEmail@(E)mail.com
    tboulay · 2010-03-20 16:49:19 8
  • Find Out My Linux Distribution Name and Version


    -1
    if [ -x /etc/*-release ]; then cat /etc/*-release ; else cat /etc/*-version ; fi
    hugoeustaquio · 2011-06-22 14:09:24 3
  • Transfer files with rsync over ssh on a non-standard port.

    Transfer files with rsync over ssh on a non-standard port, showing a progress bar and resuming partial transfers.


    -1
    rsync -P -e 'ssh -p PORT' SRC DEST
    vickio · 2011-10-13 08:59:07 4
  • ‹ First  < 498 499 500 501 502 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Your name backwards

test for ksh/bash
Dave Korn gave me this one. It works because ksh allows variable names ( w/o the $name syntax ) used by sh and bash. I wrote it to permit "single source" shell libraries; the current objective: every shell library may be sourced by either shell. see http://github.com/applemcg/backash

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Find the package that installed a command

extract element of xml
poor man's xml parser :)

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

convert a .wmv to a .avi

Displays user-defined ps output and pidstat output about the top CPU or MEMory users.
It grabs the PID's top resource users with $(ps -eo pid,pmem,pcpu| sort -k 3 -r|grep -v PID|head -10) The sort -k is sorting by the third field which would be CPU. Change this to 2 and it will sort accordingly. The rest of the command is just using diff to display the output of 2 commands side-by-side (-y flag) I chose some good ones for ps. pidstat comes with the sysstat package(sar, mpstat, iostat, pidstat) so if you don't have it, you should. I might should take off the timestamp... :|

Create Encrypted WordPress MySQL Backup without any DB details, just the wp-config.php
The coolest way I've found to backup a wordpress mysql database using encryption, and using local variables created directly from the wp-config.php file so that you don't have to type them- which would allow someone sniffing your terminal or viewing your shell history to see your info. I use a variation of this for my servers that have hundreds of wordpress installs and databases by using a find command for the wp-config.php file and passing that through xargs to my function.

set wallpaper on windowmaker in one line
set directly the wallpaper on windowmaker , use this command with display of imagemagick :)

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: