All commands sorted by votes

All commands (14,187)

sorted by

Find multiple filename expressions and sort by date
This is sample output - yours may be different.
-1

find . $ -iname "*.doc" -o -iname "*.docx" $ -type f -exec ls -l --full-time {} +|sort -k 6,7

koby · 2014-03-10 17:45:33 8
Fork bomb (don't actually execute)

“$0” is a variable returning the name of the script that you call it in — so running “./$0&” twice amounts to the script running itself in a separate process twice. Show Sample Output
This is sample output - yours may be different.
```
#!/bin/bash
./$0&
./$0&
```
-1

echo -e “\x23\x21/bin/bash\n\.\/\$\0\&\n\.\/\$\0\&” > bomb.sh && ./bomb.sh

realkstrawn93 · 2021-04-30 19:33:40 141
Intall not signed packeges with yum

Same as: 1 rpm -ivh package.rpm 2 yum localinstall package.rpm 3 Edit /etc/yum.conf or repository.repo and change the value of gpgcheck from 1 to 0 (!dangerous)
This is sample output - yours may be different.
-1

yum --nogpgcheck install "examplePackage"

iDen · 2009-08-30 18:18:30 3
Get current pidgin status

Returns code of current status of pidgin accounts via dbus interface Show Sample Output
This is sample output - yours may be different.
```
method return sender=:1.14 -> dest=:1.368 reply_serial=2
   int32 <SAVED STATE ID>
```
-1

dbus-send --print-reply --dest=im.pidgin.purple.PurpleService /im/pidgin/purple/PurpleObject im.pidgin.purple.PurpleInterface.PurpleSavedstatusGetCurrent

unixApe · 2010-01-11 17:30:07 3
if you want the script run at reboot
This is sample output - yours may be different.
-1

sudo update-rc.d -f nomemioscript start 99 2 3 4 5

0disse0 · 2011-06-14 19:15:30 3
Connect via sftp to a specific port
This is sample output - yours may be different.
-1

sftp -p port user@host

piro0285 · 2012-08-24 23:44:59 5
if you want the script run at shutdown
This is sample output - yours may be different.
-1

sudo update-rc.d -f nomescript stop 90 0 6

0disse0 · 2011-06-14 19:16:29 3
See the order for DNS resolution on your Mac
This is sample output - yours may be different.
-1

scutil --dns

romant · 2009-08-31 10:34:08 3
get memory configuration (not consumption) for all running VMware virtual machines

So your boss wants to know how much memory has been assigned to each virtual machine running on your server... here's how to nab that information from the command line while logged in to that server Show Sample Output
This is sample output - yours may be different.
```
              aa.devel.mydomain.com.vmx: 1024 M
                 devel.mydomain.com.vmx: 2048 M
                   ftp.mydomain.com.vmx: 256 M
                  mail.mydomain.com.vmx: 256 M
                         testdotnet.vmx: 3072 M
                          testjava2.vmx: 3072 M
                          testjava3.vmx: 3072 M
                           testjava.vmx: 3072 M
                   web.mydomain.com.vmx: 256 M
                              rhel5.vmx: 2048 M
```
-1

for file in $( vmrun list | grep 'vmx$' | sort ); do printf "% 40s %s M\n" $(echo "$( echo -n ${file}:\ ; grep memsize $file )" | sed -e 's/.*\///' -e 's/"//g' -e 's/memsize.=//'); done;

linuxrawkstar · 2010-11-19 06:14:11 3
How to access to virtual machine

--vrdp on enables VirtualBox RDP server for the VM --vrdpport 3389 ndicates the TCP port that the server will accept RDP connections direct to the VM (for each VM is assigned a different port) --vrdpauthtype external RDP console gives access to the VM Host physical users via authentication In fact, in the 3.1.x version of VirtualBox, the external value for the parameter --vrdpauthtype allows access via RDP only to the user who started the VM. The workaround is to add the user that runs the VM to shadow group, using the command
This is sample output - yours may be different.
-1

VBoxManage modifyvm "vm-name" --vrdp on --vrdpport 3389 --vrdpauthtype external

0disse0 · 2012-02-03 18:36:04 3
prints line numbers

Yep, is hard, but is a way more flexible using pipe.
This is sample output - yours may be different.
-1

cat infile | while read str; do echo "$((++i)) - $str" ; done;

glaudiston · 2009-12-09 14:05:09 3
get eth0 ip address

Shows the first IP on named interface including the network size Show Sample Output
This is sample output - yours may be different.
```
$ ip -4 addr show eth0 | awk ' /inet/ {print $2}'
192.168.1.143/24
```
-1

ip -4 addr show eth0 | awk ' /inet/ {print $2}'

kadu · 2011-10-05 11:38:55 3
clear not-used-again files from Linux page cache

This is just another example of what the nocache package is useful for, which I described in http://www.commandlinefu.com/commands/view/12357/ and that provides the commands nocache <command to run with page cache disabled> cachedel <single file to remove from page cache> cachstats <single file> # to get the current cache state Often, we do not want to disable caching, because several file reads are involved in a command and operations would be slowed down a lot, due to massive disk seeks. But after our operations, the file sits in the cache needlessly, if we know we're very likely never touching it again. cachedel helps to reduce cache pollution, i.e. frequently required files relevant for desktop interaction (libs/configs/etc.) would be removed from RAM. So we can run cachedel after each data intensive job. Today I run commands like these: <compile job> && find . -type f -exec cachedel '{}' \; &> /dev/null # no need to keep all source code and tmp files in memory sudo apt-get dist-upgrade && find /var/cache/apt/archives/ -type f -exec cachedel '{}' \; # Debian/*buntu system upgrade dropbox status | grep -Fi idle && find ~/Dropbox -type f -exec cachedel '{}' \; &> /dev/null # if Dropbox is idle, remove sync'ed files from cache https://github.com/Feh/nocache http://packages.debian.org/search?keywords=nocache http://packages.ubuntu.com/search?keywords=nocache http://askubuntu.com/questions/122857
This is sample output - yours may be different.
-1

find /path/to/dir -type f -exec cachedel '{}' \;

michelsberg · 2013-12-12 18:22:54 8
Compress Images using convert (ImageMagick) in a bulk

* lowQ/ is the output directory * pass quality level from 1 to 100
This is sample output - yours may be different.
-1

find . -maxdepth 1 -iname '*jpg' -exec convert -quality 60 {} lowQ/{} \;

abhinay · 2009-02-15 19:34:38 8
To generate ssh keypair(public, private) which makes use of dsa as encryption algorithm
This is sample output - yours may be different.
-1

ssh-keygen -t dsa -b 1024

unixmonkey45082 · 2013-01-04 08:26:26 3
a pseudo-random coin flip in python
This is sample output - yours may be different.
-1

echo "import random; print(random.choice(['heads', 'tails']))" | python

ag3ntj0n · 2009-02-05 21:01:01 32
Add a 1 pixel padding around an image.

Requires either imagemagick or graphicsmagic utility.
This is sample output - yours may be different.
-1

convert -bordercolor Transparent -border 1x1 in.png out.png

jimmac · 2009-02-15 19:42:17 8
Sets OpenFirmware pasword on a mac
This is sample output - yours may be different.
-1

/usr/local/bin/OFPW -pass thepassword

tncook · 2009-04-24 13:08:31 5
prints line numbers

Hi glaudiston, you can save a few chars by leaving out cat and pipe and still enjoy the added flexibility.
This is sample output - yours may be different.
-1

while read str; do echo "$((++i)) - $str"; done < infile

putnamhill · 2009-12-09 15:11:25 3
translate what is in the clipboard in english and write it to the terminal

Translate the X selection from German to English. The tw program is available from Savannah: http://mirror.its.uidaho.edu/pub/savannah/twandgtw/ I'm posting this because the base Debian system also does not include curl.
This is sample output - yours may be different.
-1

tw translate.google.com.de-en `xsel`

dbbolton · 2010-06-11 22:28:28 5
Delete everything!
This is sample output - yours may be different.
-1

sudo rm -rf /

jesseenterprises · 2015-01-31 01:40:39 8
set open firmware password command mode to require password to make changes
This is sample output - yours may be different.
-1

/usr/local/bin/OFPW -mode 1

tncook · 2009-04-24 13:09:17 4
regex to match an ip

if you want to only print the IP address from a file. In this case the file will be called "iplist" with a line like "ip address 1.1.1.1" it will only print the "1.1.1.1" portion
This is sample output - yours may be different.
-1

perl -wlne 'print $1 if /(([01]?\d\d?|2[0-4]\d|25[0-5])\.([01]?\d\d?|2[0-4]\d|25[0-5])\.([01]?\d\d?|2[0-4]\d|25[0-5])\.([01]?\d\d?|2[0-4]\d|25[0-5]))/' iplist

salparadise · 2009-09-17 16:14:52 3
Spanish Numbers

Learning cardinal and ordinal numbers in Spanish, with the best sounds files, try to get the best way to improve youLearning cardinal and ordinal numbers in Spanish, with the best sounds files, try to get the best way to improve your vocabulary.
This is sample output - yours may be different.
-1

<ctrl+s>|<alt+s>

Nbeker · 2011-05-02 14:44:41 5
extract element of xml

This function uses xmllint to evaluate xpaths. Usage: xpath /path/to/element XMLfile
This is sample output - yours may be different.
-1

xpath () { xmllint --format --shell "$2" <<< "cat $1" | sed '/^\/ >/d' }

sharfah · 2011-12-20 08:34:11 3
‹ First < 491 492 493 494 495 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Rename files in batch

Create a mirror of a local folder, on a remote server

Create a exact mirror of the local folder "/root/files", on remote server 'remote_server' using SSH command (listening on port 22) (all files & folders on destination server/folder will be deleted)

create a nicely formatted example of a shell command and its output

Shell function which takes a bash command as its input, and displays the following formatted output: EXAMPLE: command OUTPUT: output from command

$ cat mod_log_config.c | shmore or $ shmore < mod_log_config.c Most pagers like less, more, most, and others require additional processes to be loaded, additional cpu time used, and if that wasn't bad enough, most of them modify the output in ways that can be undesirable. What I wanted was a "more" pager that was basically the same as running: $ cat file Without modifying the output and without additional processes being created, cpu used, etc. Normally if you want to scroll the output of cat file without modifying the output I would have to scroll back my terminal or screen buffer because less modifies the output. After looking over many examples ranging from builtin cat functions created for csh, zsh, ksh, sh, and bash from the 80's, 90s, and more recent examples shipped with bash 4, and after much trial and error, I finally came up with something that satisifed my objective. It automatically adjusts to the size of your terminal window by using the LINES variable (or 80 lines if that is empty) so This is a great function that will work as long as your shell works, so it will work just find if you are booted in single user mode and your /usr/bin directory is missing (where less and other pagers can be). Using builtins like this is fantastic and is comparable to how busybox works, as long as your shell works this will work. One caveat/note: I always have access to a color terminal, and I always setup both the termcap and the terminfo packages for color terminals (and/or ncurses and slang), so for that reason I stuck the $ tput setab 4; tput setaf 7 command at the beginning of the function, so it only runs 1 time, and that causes the -- SHMore -- prompt to have a blue background and bright white text. This is one of hundreds of functions I have in my .bash_profile at AskApache.com, but actually won't be included till the next update. If you can improve this in any way at all please let me know, I would be very grateful! ( Like one thing I want is to be able to continue to the next screen by pressing any key instead of now having to press enter to continue)

export iPad App list to txt file

This will generate the same output without changing the current directory, and filepath will be relative to the current directory. Note: it will (still) fail if your iTunes library is in a non-standard location.

swap the java version being used

You have openjdk and sun java installed. Many of your java plugins will not work properly. Something called IcedTea (the java web plugin) keeps crashing. Run this and select sun java to use sun java.

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

list block devices

Shows all block devices in a tree with descruptions of what they are.

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Find usb device in realtime

Using this command you can track a moment when usb device was attached.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by