All commands (14,187)

  • Remove trailing whitespaces (or tabs) from a text file

    This command is useful when you are programming, for example.


    -1
    sed -i 's/[ \t]\+$//g' file.txt
    elder · 2011-09-07 01:47:44 9
  • Show all groups user is a member of and other useful info


    -1
    net user USERNAME /domain
    shawn_abdushakur · 2014-01-02 20:22:46 7
  • my command for downloading delicious web links,

    just a alternative using a saved html file of all of my bookmarks. works well although it takes awhile.


    -1
    wget -r --wait=5 --quota=5000m --tries=3 --directory-prefix=/home/erin/Documents/erins_webpages --limit-rate=20k --level=1 -k -p -erobots=off -np -N --exclude-domains=del.icio.us,doubleclick.net -F -i ./delicious-20090629.htm
    bbelt16ag · 2009-07-02 01:46:21 7
  • CPU architecture details

    It works in every linux box Show Sample Output


    -1
    cat /proc/cpuinfo
    magicjohnson_ · 2010-09-24 09:27:58 3
  • OSX Terminal helper with tab completion, ssh tunneling, and now screen re-attach

    http://github.com/c3w/ash . a Ruby SSH helper script . reads a JSON config file to read host, FQDN, user, port, tunnel options . changes OSX Terminal profiles based on host 'type' USAGE: put 'ash' ruby script in your PATH modify and copy ashrc-dist to ~/.ashrc configure OSX Terminal profiles, such as "webserver", "development", etc run "ash myhostname" and away you go! v.2 will re-attach to a 'screen' named in your ~/.ashrc Show Sample Output


    -1
    ash prod<tab>
    c3w · 2012-05-12 19:51:02 8
  • ls


    -1
    ls
    yingkailiang · 2013-03-14 01:28:01 5
  • check your up to date delicious links.

    This commands queries the delicious api then runs the xml through xml2, grabs the urls cuts out the first two columns, passes through uniq to remove duplicates if any, and then goes into linkchecker who checks the links. the links go the blacklist in ~/.linkchecker/blacklist. please see the manual pages for further info peeps. I took me a few days to figure this one out. I how you enjoy it. Also don't run these api more then once a few seconds you can get banned by delicious see their site for info. ~updated for no recursive Show Sample Output


    -1
    curl -k https://Username:Password@api.del.icio.us/v1/posts/all?red=api | xml2| \grep '@href' | cut -d\= -f 2- | sort | uniq | linkchecker -r0 --stdin --complete -v -t 50 -F blacklist
    bbelt16ag · 2013-05-04 17:43:21 8
  • Find all files containing a word

    This is very similar to the first example except that it employs the 'exec' argument of the find command rather than piping the result to xargs. The second example is nice and tidy but different *NIXs may not have as capable a grep command.


    -1
    find . -name "*.php" -exec grep -il searchphrase {} \;
    unixmonkey7797 · 2010-01-16 05:09:30 4
  • identify big file

    first 10 big file


    -1
    du -s * | sort -nr | head
    chenge · 2010-05-13 12:21:22 4
  • Timelapse with ffmpeg (after symlinking pictures as per ffmpeg FAQ)


    -1
    ffmpeg -r 12 -i img%03d.jpg -sameq -s hd720 -vcodec libx264 -crf 25 OUTPUT.MP4
    brainstorm · 2013-05-04 18:46:36 9
  • hardcode dnsserver, no more rewriting of etc/resolv.conf

    The while loop is an overkill, it would be simpler to prevent the file to be modified. That said, none of the proposed solutions are such: a real one would go to the source of the problem.


    -1
    chkmod -w /etc/resolve.conf
    ntropia · 2018-05-14 16:25:47 163
  • Edit all files found having a specific string found by grep

    Make sure that find does not touch anything other than regular files, and handles non-standard characters in filenames while passing to xargs.


    -1
    find . -type f -exec grep -qi 'foo' {} \; -print0 | xargs -0 vim
    arcege · 2009-09-03 17:55:26 7
  • Pear install behind proxy

    Useful since "export http_proxy=blahblah:8080" doesn't seem to work with pear Show Sample Output


    -1
    pear config-set http_proxy http://myusername:mypassword@corporateproxy:8080
    KoRoVaMiLK · 2010-05-13 14:44:03 30
  • know which version of the program is installed on your Debian and derivatives

    Output: Version 3.2-0 (for example if you type # aptitude show bash | grep Vers Depends on the language of your distribution, because the name of the word "Version" in other languages may be different.


    -1
    aptitude show $PROGRAM | grep Vers
    aabilio · 2009-02-27 23:24:37 8
  • Get minimum, current, maximum possible resolution of Xorg


    -1
    xrandr -q | grep -w Screen
    hemanth · 2010-02-14 15:38:49 3
  • split a postscript file

    splits a postscript file into multiple postscript files. for each page of the input file one output file will be generated. The files will be numbered for example 1_orig.ps 2_orig.ps ... The psselect commad is part of the psutils package


    -1
    file=orig.ps; for i in $(seq `grep "Pages:" $file | sed 's/%%Pages: //g'`); do psselect $i $file $i\_$file; done
    damncool · 2010-09-24 19:44:32 4
  • A simple overview of memory usage refreshed at user designated intervals.

    This command shows a high level overview of system memory and usage refreshed in seconds. Change -n 10 to you desired refresh interval. Show Sample Output


    -1
    watch -n 10 free -m
    Darkstar · 2014-01-04 10:10:15 12
  • Find the full path of an already running process

    Uses the pid to get the full path of the process. Useful when you do not which command got picked from the path Show Sample Output


    -1
    readlink -f /proc/<pid>/cmdline
    naseer · 2009-05-26 10:09:03 23
  • Filenames ROT13

    This got a bit complicated, because I had to introduce an additional dot at the end that has to be removed again later.


    -1
    for each in *; do file="$each."; name=${file%%.*}; suffix=${file#*.}; mv "$each" "$(echo $name | rot13)${suffix:+.}${suffix%.}"; done
    hfs · 2010-03-20 16:11:12 6
  • Sort files in $PWD by year embedded anywhere in filename


    -1
    ls --color=never -1| grep -E "[0-9]{4}"|sed -re "s/^(.*)([0-9]{4})(.*)$/\2 \1\2\3/" | sort -r
    ysangkok · 2014-01-04 20:50:12 9
  • display only tcp


    -1
    netstat -4tnape
    gnuyoga · 2009-05-26 11:50:52 5
  • wget, tar xzvf, cd, ls

    Combines a few repetitive tasks when compiling source code. Especially useful when a hypen in a file-name breaks tab completion. 1.) wget source.tar.gz 2.) tar xzvf source.tar.gz 3.) cd source 4.) ls From there you can run ./configure, make and etc. Show Sample Output


    -1
    wtzc () { wget "$@"; foo=`echo "$@" | sed 's:.*/::'`; tar xzvf $foo; blah=`echo $foo | sed 's:,*/::'`; bar=`echo $blah | sed -e 's/\(.*\)\..*/\1/' -e 's/\(.*\)\..*/\1/'`; cd $bar; ls; }
    oshazard · 2010-01-17 11:25:47 3
  • Split a file into equal size chunks and archive to (e)mail account.

    This is just a little snippit to split a large file into smaller chunks (4mb in this example) and then send the chunks off to (e)mail for archival using mutt. I usually encrypt the file before splitting it using openssl: openssl des3 -salt -k <password> -in file.tgz -out file.tgz.des3 To restore, simply save attachments and rejoin them using: cat file.tgz.* > output_name.tgz and if encrypted, decrypt using: openssl des3 -d -salt -k <password> -in file.tgz.des3 -out file.tgz edit: (changed "g" to "e" for political correctness)


    -1
    split -b4m file.tgz file.tgz. ; for i in file.tgz.*; do SUBJ="Backup Archive"; MSG="Archive File Attached"; echo $MSG | mutt -a $i -s $SUBJ YourEmail@(E)mail.com
    tboulay · 2010-03-20 16:49:19 8
  • Find Out My Linux Distribution Name and Version


    -1
    if [ -x /etc/*-release ]; then cat /etc/*-release ; else cat /etc/*-version ; fi
    hugoeustaquio · 2011-06-22 14:09:24 3
  • Transfer files with rsync over ssh on a non-standard port.

    Transfer files with rsync over ssh on a non-standard port, showing a progress bar and resuming partial transfers.


    -1
    rsync -P -e 'ssh -p PORT' SRC DEST
    vickio · 2011-10-13 08:59:07 4
  • ‹ First  < 498 499 500 501 502 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Take a screenshot of the window the user clicks on and name the file the same as the window title
In general, this is actually not better than the "scrot -d4" command I'm listing it as an alternative to, so please don't vote it down for that. I'm adding this command because xwd (X window dumper) comes with X11, so it is already installed on your machine, whereas scrot probably is not. I've found xwd handy on boxen that I don't want to (or am not allowed to) install packages on. NOTE: The dd junk for renaming the file is completely optional. I just did that for fun and because it's interesting that xwd embeds the window title in its metadata. I probably should have just parsed the output from file(1) instead of cutting it out with dd(1), but this was more fun and less error prone. NOTE2: Many programs don't know what to do with an xwd format image file. You can convert it to something normal using NetPBM's xwdtopnm(1) or ImageMagick's convert(1). For example, this would work: "xwd | convert fd:0 foo.jpg". Of course, if you have ImageMagick already installed, you'd probably use import(1) instead of xwd. NOTE3: Xwd files can be viewed using the X Window UnDumper: "xwud <foo.xwd". ImageMagick and The GIMP can also read .xwd files. Strangely, eog(1) cannot. NOTE4: The sleep is not strictly necessary, I put it in there so that one has time to raise the window above any others before clicking on it.

follow the content of all files in a directory
The `-q' arg forces tail to not output the name of the current file

sort a JSON blob
For situations where you keep JSON in a VCS and you want your diffs to be sane, such as within a Chef configuration repo.

Change prompt to MS-DOS one (joke)

pass the output of some command to a new email in the default email client
This depends on 'stripansi' and 'urlencode' commands, which exist on my system as these aliases: $ alias stripansi='perl -ple "s/\033\[(?:\d*(?:;\d+)*)*m//g;"' $ alias urlencode='perl -MURI::Escape -ne "\$/=\"\"; print uri_escape \$_"' The `open` command handles URLs on a Mac. Substitute the equivalent for your system (perhaps gnome-open). I don't use system `mail`, so I have this aliased as `mail` and use it this way: $ git show head | mail

github push-ing behind draconian proxies!
If you are behind a restrictive proxy/firewall that blocks port 22 connections but allows SSL on 443 (like most do) then you can still push changes to your github repository. Your .ssh/config file should contain: Host * ForwardX11 no TCPKeepAlive yes ProtocolKeepAlives 30 ProxyCommand /usr/local/bin/proxytunnel -v -p -d %h:443 Host User git Hostname ssh.github.com ChallengeResponseAuthentication yes IdentityFile ~/.ssh/id_rsa IdentitiesOnly yes Basically proxytunnel "tunnels" your ssh connection through port 443. You could also use corkscrew or some other tunneling program that is available in your distro's repository. PS: I generally use "github.com" as the SSH-HOST so that urls of the kind git@github.com:USER/REPO.git work transparently :) You

add a gpg key to aptitute package manager in a ubuntu system
when we add a new package to a aptitude (the debian package manager) we need to add the gpg, otherwise it will show warning / error for missing key

Prepare a commandlinefu command.
This command will format your alias or function to a single line, trimming duplicate white space and newlines and inserting delimiter semi-colons, so it continues to work on a single line.

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Shortcut to find files with ease.
It looks for files that contains the given word as parameter. * case insensitive * matches files containing the given word.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: