All commands (14,187)

  • This command is useful when you are programming, for example.


    -1
    sed -i 's/[ \t]\+$//g' file.txt
    elder · 2011-09-07 01:47:44 9

  • -1
    net user USERNAME /domain
    shawn_abdushakur · 2014-01-02 20:22:46 7
  • just a alternative using a saved html file of all of my bookmarks. works well although it takes awhile.


    -1
    wget -r --wait=5 --quota=5000m --tries=3 --directory-prefix=/home/erin/Documents/erins_webpages --limit-rate=20k --level=1 -k -p -erobots=off -np -N --exclude-domains=del.icio.us,doubleclick.net -F -i ./delicious-20090629.htm
    bbelt16ag · 2009-07-02 01:46:21 7
  • It works in every linux box Show Sample Output


    -1
    cat /proc/cpuinfo
    magicjohnson_ · 2010-09-24 09:27:58 3
  • http://github.com/c3w/ash . a Ruby SSH helper script . reads a JSON config file to read host, FQDN, user, port, tunnel options . changes OSX Terminal profiles based on host 'type' USAGE: put 'ash' ruby script in your PATH modify and copy ashrc-dist to ~/.ashrc configure OSX Terminal profiles, such as "webserver", "development", etc run "ash myhostname" and away you go! v.2 will re-attach to a 'screen' named in your ~/.ashrc Show Sample Output


    -1
    ash prod<tab>
    c3w · 2012-05-12 19:51:02 8
  • ls


    -1
    ls
    yingkailiang · 2013-03-14 01:28:01 5
  • This commands queries the delicious api then runs the xml through xml2, grabs the urls cuts out the first two columns, passes through uniq to remove duplicates if any, and then goes into linkchecker who checks the links. the links go the blacklist in ~/.linkchecker/blacklist. please see the manual pages for further info peeps. I took me a few days to figure this one out. I how you enjoy it. Also don't run these api more then once a few seconds you can get banned by delicious see their site for info. ~updated for no recursive Show Sample Output


    -1
    curl -k https://Username:Password@api.del.icio.us/v1/posts/all?red=api | xml2| \grep '@href' | cut -d\= -f 2- | sort | uniq | linkchecker -r0 --stdin --complete -v -t 50 -F blacklist
    bbelt16ag · 2013-05-04 17:43:21 8
  • This is very similar to the first example except that it employs the 'exec' argument of the find command rather than piping the result to xargs. The second example is nice and tidy but different *NIXs may not have as capable a grep command.


    -1
    find . -name "*.php" -exec grep -il searchphrase {} \;
    unixmonkey7797 · 2010-01-16 05:09:30 4
  • first 10 big file


    -1
    du -s * | sort -nr | head
    chenge · 2010-05-13 12:21:22 4

  • -1
    ffmpeg -r 12 -i img%03d.jpg -sameq -s hd720 -vcodec libx264 -crf 25 OUTPUT.MP4
    brainstorm · 2013-05-04 18:46:36 9
  • The while loop is an overkill, it would be simpler to prevent the file to be modified. That said, none of the proposed solutions are such: a real one would go to the source of the problem.


    -1
    chkmod -w /etc/resolve.conf
    ntropia · 2018-05-14 16:25:47 163
  • Make sure that find does not touch anything other than regular files, and handles non-standard characters in filenames while passing to xargs.


    -1
    find . -type f -exec grep -qi 'foo' {} \; -print0 | xargs -0 vim
    arcege · 2009-09-03 17:55:26 7
  • Useful since "export http_proxy=blahblah:8080" doesn't seem to work with pear Show Sample Output


    -1
    pear config-set http_proxy http://myusername:mypassword@corporateproxy:8080
    KoRoVaMiLK · 2010-05-13 14:44:03 30
  • Output: Version 3.2-0 (for example if you type # aptitude show bash | grep Vers Depends on the language of your distribution, because the name of the word "Version" in other languages may be different.


    -1
    aptitude show $PROGRAM | grep Vers
    aabilio · 2009-02-27 23:24:37 8

  • -1
    xrandr -q | grep -w Screen
    hemanth · 2010-02-14 15:38:49 3
  • splits a postscript file into multiple postscript files. for each page of the input file one output file will be generated. The files will be numbered for example 1_orig.ps 2_orig.ps ... The psselect commad is part of the psutils package


    -1
    file=orig.ps; for i in $(seq `grep "Pages:" $file | sed 's/%%Pages: //g'`); do psselect $i $file $i\_$file; done
    damncool · 2010-09-24 19:44:32 4
  • This command shows a high level overview of system memory and usage refreshed in seconds. Change -n 10 to you desired refresh interval. Show Sample Output


    -1
    watch -n 10 free -m
    Darkstar · 2014-01-04 10:10:15 12
  • Uses the pid to get the full path of the process. Useful when you do not which command got picked from the path Show Sample Output


    -1
    readlink -f /proc/<pid>/cmdline
    naseer · 2009-05-26 10:09:03 23
  • This got a bit complicated, because I had to introduce an additional dot at the end that has to be removed again later.


    -1
    for each in *; do file="$each."; name=${file%%.*}; suffix=${file#*.}; mv "$each" "$(echo $name | rot13)${suffix:+.}${suffix%.}"; done
    hfs · 2010-03-20 16:11:12 6

  • -1
    ls --color=never -1| grep -E "[0-9]{4}"|sed -re "s/^(.*)([0-9]{4})(.*)$/\2 \1\2\3/" | sort -r
    ysangkok · 2014-01-04 20:50:12 9

  • -1
    netstat -4tnape
    gnuyoga · 2009-05-26 11:50:52 5
  • Combines a few repetitive tasks when compiling source code. Especially useful when a hypen in a file-name breaks tab completion. 1.) wget source.tar.gz 2.) tar xzvf source.tar.gz 3.) cd source 4.) ls From there you can run ./configure, make and etc. Show Sample Output


    -1
    wtzc () { wget "$@"; foo=`echo "$@" | sed 's:.*/::'`; tar xzvf $foo; blah=`echo $foo | sed 's:,*/::'`; bar=`echo $blah | sed -e 's/\(.*\)\..*/\1/' -e 's/\(.*\)\..*/\1/'`; cd $bar; ls; }
    oshazard · 2010-01-17 11:25:47 3
  • This is just a little snippit to split a large file into smaller chunks (4mb in this example) and then send the chunks off to (e)mail for archival using mutt. I usually encrypt the file before splitting it using openssl: openssl des3 -salt -k <password> -in file.tgz -out file.tgz.des3 To restore, simply save attachments and rejoin them using: cat file.tgz.* > output_name.tgz and if encrypted, decrypt using: openssl des3 -d -salt -k <password> -in file.tgz.des3 -out file.tgz edit: (changed "g" to "e" for political correctness)


    -1
    split -b4m file.tgz file.tgz. ; for i in file.tgz.*; do SUBJ="Backup Archive"; MSG="Archive File Attached"; echo $MSG | mutt -a $i -s $SUBJ YourEmail@(E)mail.com
    tboulay · 2010-03-20 16:49:19 8

  • -1
    if [ -x /etc/*-release ]; then cat /etc/*-release ; else cat /etc/*-version ; fi
    hugoeustaquio · 2011-06-22 14:09:24 3
  • Transfer files with rsync over ssh on a non-standard port, showing a progress bar and resuming partial transfers.


    -1
    rsync -P -e 'ssh -p PORT' SRC DEST
    vickio · 2011-10-13 08:59:07 4
  • ‹ First  < 498 499 500 501 502 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

Create a mirror of a local folder, on a remote server
Create a exact mirror of the local folder "/root/files", on remote server 'remote_server' using SSH command (listening on port 22) (all files & folders on destination server/folder will be deleted)

make 100 directories with leading zero, 001...100, using bash3.X

parrallel execution of a command on remote hosts by ssh or rsh or ...
parrallel execution of a command on remote host by ssh or rsh or ... very useful for cluster management (software update)

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

convert hex to decimal ; decimal to hex

Alternative way to generate an XKCD #936 style 4 word password usig sed
This is what I came up to generate XKCD #936 style four-word password. Since first letter of every word is capitalized it looks a bit more readable to my eyes. Also strips single quotes. And yes - regex is a bit of a kludge, but that's the bes i could think of.

concat multiple videos into one (and add an audio track)
This is an extract from a larger script which formats the video for DVD. The videos I use have no audio track so I need to add one. Tweak as you like...

Show current working directory of a process

Renames all files in the current directory such that the new file contains no space characters.
This is a better version, as it does no command piping, uses for instead of while loops, which allows for a list of files in the current working directory to be natively processed. It also uses the -v/verbose option with mv to let you know what the command is doing. While the command does exactly the same in a better way, I would modify the sed option to replace spaces with underscores instead, or dashes. Please note that you'll receive errors with this command as it tries to rename files that don't even have spaces. This is an alternative to: http://www.commandlinefu.com/commands/view/8761/renames-all-files-in-the-current-directory-such-that-the-new-file-contains-no-space-characters.

Download Video & extract only a specific Time of it


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: