Commands tagged Debian (100)

  • Check tcp-wrapping support

    This function returns TRUE if the application supports tcp-wrapping or FALSE if not by reading the shared libraries used by this application. Show Sample Output


    1
    supportsWrap(){ ldd `which ${1}` | grep "libwrap" &>/dev/null && return 0 || return 1; }
    cicatriz · 2010-12-01 15:22:29 15
  • Check if a package is installed. If it is, the version number will be shown.

    If the first two letters are "ii", then the package is installed. You can also use wildcards. For example, . dpkg -l openoffice* . Note that dpkg will usually not report packages which are available but uninstalled. If you want to see both which versions are installed and which versions are available, use this command instead: . apt-cache policy python Show Sample Output


    1
    dpkg -l python
    hackerb9 · 2011-01-05 06:15:13 5
  • apt-get upgrade with bandwidth limit

    Trickle is here: http://monkey.org/~marius/pages/?page=trickle Trickle is a simple bandwidth limiter


    1
    trickle sudo apt-get update -y
    mrman · 2011-02-15 02:05:37 3
  • locating packages held back, such as with "aptitude hold <package>"

    locating packages held back, such as with "aptitude hold "


    1
    aptitude search ~ahold
    pykler · 2012-04-29 15:02:32 4
  • List your largest installed packages (on Debian/Ubuntu)

    The other commands were good, but they included packages that were installed and then removed. This command only shows packages that are currently installed, sorts smallest to largest, and formats the sizes to be human readable. Show Sample Output


    1
    dpkg-query --show --showformat='${Package;-50}\t${Installed-Size}\n' `aptitude --display-format '%p' search '?installed!?automatic'` | sort -k 2 -n | grep -v deinstall | awk '{printf "%.3f MB \t %s\n", $2/(1024), $1}'
    EvilDennisR · 2013-07-26 23:18:20 13
  • print the name of each package APT knows [matching a prefix]

    In this case, linux- is the prefix; simply running apt-cache pkgnames would list every package APT knows about. The default APT config assumes -g, --generate; to use the cache as/is, you could similarly run: apt-cache --no-generate pkgnames [prefix] Adding --all-names, like so: apt-cache --no-generate --all-names pkgnames [prefix] would print all the packages APT knows about, using the cache as/is, including virtual packages and missing dependencies. This command was shamelessly stolen from the apt-cache(8) man-page. Show Sample Output


    1
    apt-cache pkgnames linux-
    benjabean1 · 2014-12-14 06:48:57 8
  • Marks all manually installed deb packages as automatically installed.

    An alternative without aptitude.


    1
    apt-mark showmanual|xargs sudo apt-mark markauto
    DellDor · 2015-08-10 02:35:22 12
  • Remove specific versions of old kernels (Ubuntu/Debian)

    If, for example, you want to remove all kernels and headers but the last three versions, you can't use one of that magic all-in-one "remove old stuff" commands. With this simple but elegant command you can remove a range of versions, or a list of versions with e.g. {14,16,20}. Show Sample Output


    1
    apt purge linux*{14..18}*
    ppq · 2016-04-20 07:44:55 11
  • Find name of package which installed a given shell command

    Some command names are very different from the name of the package that installed them. Sometimes, you may want to find out the name of the package that provided a command on a system, so that you can install it on another system. Show Sample Output


    1
    dpkg -S "$(readlink -e $(which w))" | cut -d ':' -f 1
    Fox · 2016-05-18 09:41:29 11
  • get a rough estimate about how much disk space is used by all the currently installed debian packages

    The vaule is expressed in megabytes Show Sample Output


    1
    echo $[ ($(dpkg-query -s $(dpkg --get-selections | grep -oP '^.*(?=\binstall)') | grep -oP '(?<=Installed-Size: )\d+' | tr '\n' '+' | sed 's/+$//')) / 1024 ]
    acavagni · 2019-06-02 16:35:34 55
  • find packages installed from e.g. sid which are newer than those available from e.g. testing when sid is no longer present as a source repo

    This is useful if you add sid, install some packages, then remove sid and want to work out which packages you installed from sid that should be removed (e.g. before an upgrade to the new stable). Alternatively you can think of this as "find installed packages that can no longer be installed."


    1
    aptitude search -F '%p %v %V %O' '?narrow(?not(?archive("^[^n][^o].*$")),?version(CURRENT))' | while IFS=' ' read -r pkg ver candidate origin; do if [[ $ver == "$candidate" ]] && [[ $origin == '(installed locally)' ]]; then echo "$pkg"; fi; done
    sorpigal · 2021-12-26 15:57:15 306
  • find files in $PATH that were not installed through dpkg

    OS: Debian based (or those that use dpkg) Equivalent to doing a dpkg -S on each file in $PATH, but way faster. May report files generated though postinstall scripts and such. For example . It will report /usr/bin/vim .. which is not not a file installed directly by dpkg, but a link generated by alternatives hooks


    0
    echo -e "${PATH//://\n}" >/tmp/allpath; grep -Fh -f /tmp/allpath /var/lib/dpkg/info/*.list|grep -vxh -f /tmp/allpath >/tmp/installedinpath ; find ${PATH//:/ } |grep -Fxv -f /tmp/installedinpath
    kamathln · 2009-09-09 05:33:14 4
  • List your largest installed packages (on Debian/Ubuntu)

    List packages and their disk usage in decreasing order. This uses the "Installed-Size" from the package metadata. It may differ from the actual used space, because e.g. data files (think of databases) or log files may take additional space. Show Sample Output


    0
    perl -ne '$pkg=$1 if m/^Package: (.*)/; print "$1\t$pkg\n" if m/^Installed-Size: (.*)/;' < /var/lib/dpkg/status | sort -rn | less
    hfs · 2009-10-19 12:55:59 7
  • Show a Package Version on Debian based distribution


    0
    dpkg-query -W -f='${Version}' package-name
    ohe · 2010-06-02 14:39:08 3
  • Show a Package Version on Debian based distribution

    Supports regex pattern and very flexible output parameters and search options. Show Sample Output


    0
    aptitude -F '%p %v#' search <pattern>
    unixmonkey10157 · 2010-06-03 15:37:27 3
  • A better 'apt-cache' using Xapian to rank results

    A replacement for 'apt-cache' that uses a Xapian to produce ranked results. Available in 'apt-xapian-index' 0.27 and higher. Show Sample Output


    0
    axi-cache search <searchterm>
    tarkasteve · 2010-07-05 00:16:03 3
  • Purge configuration files of removed packages on debian based systems

    Lists all packages in "rc" state and purge them one at a time.


    0
    dpkg -l | grep ^rc | cut -d' ' -f3 | xargs dpkg -P
    cyrusza · 2010-11-22 12:53:31 6
  • Save the debconf configuration of an installed package


    0
    debconf-copydb configdb copydb --pattern=<PACKAGE> --config="Name: copydb" --config="Driver: File" --config="Filename: ~/copydebconf.dat"
    ohe · 2011-08-29 14:00:42 3
  • Import a debconf configuration (from a copydebconf.dat file)


    0
    debconf-copydb copydb configdb --config="Name: copydb" --config ="Driver: File" --config="Filename: ~/copydebconf.dat"
    ohe · 2011-08-29 14:01:31 3
  • Remove all unused kernels with apt-get

    since awk was already there one can use it instead of the 2 greps. might not be faster, but fast enough


    0
    apt-get remove $(dpkg -l | awk "/^ii linux-(image|headers)/ && ! /`uname -r`/ {print \$2}")
    _john · 2011-10-09 13:58:47 4
  • Install 4 new package files

    after kernel build with make deb-pkg, I like to install the 4 newest packages that exist in the directory. Beware: might be fewer for you....


    0
    sudo dpkg -i `ls -tr *.deb | tail -n4`
    _john · 2011-10-09 14:20:11 3
  • Generate a list of installed packages on Debian-based systems

    This will print the name of every installed package on a Debian system.


    0
    aptitude search ~i -F %p
    dbbolton · 2011-10-15 00:31:10 8
  • Seach for packages on Debian using regex.

    # Search for an available package on Debian systems using a regex so it only matches packages starting with 'tin'.


    0
    aptitude search ^tin
    defiantredpill · 2011-10-20 17:51:36 3
  • Marks all manually installed deb packages as automatically installed.

    Marks all manually installed deb packages as automatically installed. Usefull to combine with apt-get install <all manually packages that we want> to have a clean installed debian-based system.


    0
    aptitude -F "%p" search \!~M~i~T | xargs apt-mark markauto
    gspadari · 2012-03-09 13:44:00 7
  • change default Web browser

    also use: update-alternatives --config gnome-www-browser


    0
    update-alternatives --config x-www-browser
    gwd · 2012-07-08 20:27:42 4
  •  < 1 2 3 4 > 

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Short one line while loop that outputs parameterized content from one file to another
The above is an example of grabbing only the first column. You can define the start and end points specifically by chacater position using the following command: $ while read l; do echo ${l:10:40}; done < three-column-list.txt > column-c10-c40.txt Of course, it doesn't have to be a column, or extraction, it can be replacement $ while read l; do echo ${l/foo/bar}; done < list-with-foo.txt > list-with-bar.txt Read more about parameter expansion here: http://wiki.bash-hackers.org/syntax/pe Think of this as an alternative to awk or sed for file operations

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

show git logging
shows some logging for the git repo.

Search commandlinefu from the command line
There's probably a more efficient way to do this rather than the relatively long perl program, but perl is my hammer, so text processing looks like a nail. This is of course a lot to type all at once. You can make it better by putting this somewhere: $ clf () { (curl -d "q=$@" http://www.commandlinefu.com/search/autocomplete 2>/dev/null) | egrep 'autocomplete|votes|destination' | perl -pi -e 's/$/\n\n/g;s/^ +|\([0-9]+ votes,//g;s/^\//http:\/\/commandlinefu.com\//g'; } Then, to look up any command, you can do this: $ clf diff This is similar to http://www.colivre.coop.br/Aurium/CLFUSearch except that it's just one line, so more in the spirit of CLF, in my opinion.

Set laptop display brightness
Run as root. Path may vary depending on laptop model and video card (this was tested on an Acer laptop with ATI HD3200 video). $ cat /proc/acpi/video/VGA/LCD/brightness to discover the possible values for your display.

Mysql extended status
Useful when checking MySQL status.

save man-page as pdf

check open ports without netstat or lsof

Advanced python tracing
Trace python statement execution and syscalls invoked during that simultaneously

edit, view or execute last modified file with a single key-press
Copy this function to command line, press 'Enter' 'f'' 'Enter' to execute (sentence on the left written only for newbies). Hint 'e|x|v|1..9' in front of displayed last modified file name means: "Press 'e' for edit,'x' for execute,'v' for view or a digit-key '1..9' to touch one file from the recent files list to be last modified" and suggested (hidden files are listed too, else remove 'a' from 'ls -tarp' statement if not intended). If you find this function useful you can then rename it if needed and append or include into your ~/.bashrc config script. With the command $ . ~/.bashrc the function then can be made immediately available. In the body of the function modifications can be made, i.e. replaced joe editor command or added new option into case statement, for example 'o) exo-open $h;;' command for opening file with default application - or something else (here could not be added since the function would exceed 255 chars). To cancel execution of function started is no need to press Ctrl-C - if the mind changed and want to leave simple Enter-press is enough. Once defined, this function can with $ typeset -f f command be displayed in easy readable form

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: