Commands using cd sorted by votes

Commands using cd (215)

sorted by

Install NMAP 5.0 ,Short and sweet command to do it

Just copy and paste the code in your terminal. Note : sudo apt-get for debian versions , change as per your requirement . Source : www.h3manth.com
This is sample output - yours may be different.
-6

sudo wget -c "http://nmap.org/dist/nmap-5.00.tar.bz2" && bzip2 -cd nmap-5.00.tar.bz2 | tar xvf - && cd nmap-5.00 && ./configure && make && sudo make install

hemanth · 2009-07-26 11:36:53 7
cd(), do a ls (or whatever you can imagine) after a cd, func to long please refer to description

some people on the net already use a cd(), but most of them break 'cd -' functionality, that is "go back where you have been previosly", or 'cd' which is "go back home". This cd() copes with that. Also when given a file name, go to the directory where this file is in. cd() { if [[ -n ${*} ]] then if [[ s${*}e == s-e ]] then builtin cd - elif [[ ! -d ${*} ]] then builtin cd "${*%/*}" else builtin cd "${*}" fi else builtin cd ~ fi ls -la }
This is sample output - yours may be different.
-6

cd(), do a ls (or whatever you can imagine) after a cd, func to long please refer to description

Xk2c · 2015-01-01 20:50:19 9
Go to the created directory after using mkdir
This is sample output - yours may be different.
-7

mkdir() { /bin/mkdir $@ && eval cd "\$$#"; }

fnando · 2009-03-30 17:24:21 12
Create a directory and cd into it

Create a directory called "dirname" and navigate into it.
This is sample output - yours may be different.
-7

Dir=dirname; mkdir $Dir && cd $Dir

saibbot · 2011-04-06 14:53:57 6
Flip from one directory to another

if you cd into a directory then cd into another directory somewhere else then you run the cd - command you will go to the previous directory you was in!! To go back to the other directory just run it again. So if you are working in 2 different directories then this is the perfect command for you.
This is sample output - yours may be different.
-7

cd -

techie · 2013-05-07 14:50:18 6
apache , how to avoid bugs and start directly the server

This command is designed in order to avoid this error : /etc/init.d/apache2 force-reload * Reloading web server config apache2 httpd not running, trying to start (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs [fail] Show Sample Output
This is sample output - yours may be different.
```
* Starting web server apache2                                           [ OK ] 
```
-9

cd /etc/init.d && sudo ./apache2 start

nco · 2010-04-17 16:01:18 3
cd
This is sample output - yours may be different.
-9

cd -

another · 2010-11-03 12:17:57 4
cd into the latest directory
This is sample output - yours may be different.
-9

cd -

unixmonkey14106 · 2011-06-24 23:10:10 3
Just take me to home directory

Just type 2 characters and enter, you will be back. Show Sample Output
This is sample output - yours may be different.
```
[YAK@myserv]$ pwd
/path/to/directory
[YAK@myserv]$ cd
[YAK@myserv]$ pwd
/home/YAK
```
-10

cd

YAK · 2009-02-06 02:37:17 19
annoy your sysadmin colleague

Somehow, i prefer forcing to rm interactively to accidently rm'ing everything...
This is sample output - yours may be different.
-10

cd / && touch ./\-i

joedhon · 2012-04-05 20:55:37 3
Duplicate a directory tree using tar and pipes

the f is for file and - stdout, This way little shorter. I Like copy-directory function It does the job but looks like SH**, and this doesn't understand folders with whitespaces and can only handle full path, but otherwise fine, function copy-directory () { ; FrDir="$(echo $1 | sed 's:/: :g' | awk '/ / {print $NF}')" ; SiZe="$(du -sb $1 | awk '{print $1}')" ; (cd $1 ; cd .. ; tar c $FrDir/ )|pv -s $SiZe|(cd $2 ; tar x ) ; } Show Sample Output
This is sample output - yours may be different.
```
copy-directory /media/cdrom /mnt/backup/
 104MB 0:00:06 [7.43MB/s] [============>                                                      ]  9% ETA 0:00:58
```
-11

(cd /source/dir ; tar cv .)|(cd /dest/dir ; tar xv)

marssi · 2009-07-19 10:31:13 12
Hide files and folders on GNOME Desktop.
This is sample output - yours may be different.
-12

cd ~/Desktop && for FILES in $(ls); do mv $FILES .${FILES}; done

kjell81d · 2010-10-05 15:16:30 6
go to home directory
This is sample output - yours may be different.
-25

cd

veganstraightedg · 2009-03-23 03:12:40 10
cd
This is sample output - yours may be different.
-25

cd

wdan02 · 2010-08-06 05:33:19 32
Get back to the root directory of a Windows drive (like c:\)

Useful to quickly get back to the Windows root directory of the current drive from a sub-directory within that drive. Works also without space between 'cd' and backslash: 'cd\' or 'cd \' have the same effect Show Sample Output
This is sample output - yours may be different.
```
C:\Users\...\ALongPath>cd \
C:\>
```
-35

cd \

VonC · 2009-02-14 21:53:51 128
‹ First < 7 8 9

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Easily decode unix-time (funtion)

A shell function using perl to easily convert Unix-time to text. Put in in your ~/.bashrc or equivalent. Tested on Linux / Solaris Bourne, bash and zsh. using perl 5.6 and higher. (Does not require GNU date like some other commands)

Create a mirror of a local folder, on a remote server

Create a exact mirror of the local folder "/root/files", on remote server 'remote_server' using SSH command (listening on port 22) (all files & folders on destination server/folder will be deleted)

Compress files in a directory

Get a range of SVN revisions from svn diff and tar gz them

Handy when you need to create a list of files to be updated when subversion is not available on the remote host. You can take this tar file, and upload and extract it where you need it. Replace M and N with the revisions specific to yours. Make sure you do this from an updated (svn up) working directory.

Find the package that installed a command

Find ASCII files and extract IP addresses

Probably, most frequent use of diff

This form is used in patches, svn, git etc. And I've created an alias for it: alias diff='diff -Naur --strip-trailing-cr' The latter option is especially useful, when somebody in team works in Windows; could be also used in commands like $ svn diff --diff-cmd 'diff --strip-trailing-cr'...

Capture FTP Credentials and Commands

Print github url for the current url

Works for repos cloned via ssh or https.

ettercap..

There weren't any one liners for ettercap on this site... tisk tisk :-) (of course you'll have to plugin your own values for the variables..)

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using cd

Commands using cd (215) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using cd (215)

sorted by