Commands using sudo sorted by votes

Commands using sudo (537)

sorted by

Show live HTTP requests being made on OS X

Replace "en1" with your network interface (on OS X, usually en0, en1, eth0, etc..) Show Sample Output
This is sample output - yours may be different.
```
GET /services/rest/news/new/?stamp=1238809183049 HTTP/1.1
Host: www.qbn.com
GET / HTTP/1.1
Host: news.bbc.co.uk
GET /services/rest/news/new/?stamp=1238809185049 HTTP/1.1
Host: www.qbn.com
```
-2

sudo tcpdump -i en1 -n -s 0 -w - | grep -a -o -E "Host\: .*|GET \/.*"

peterc · 2009-04-04 01:41:48 8
Shred an complete disk, by overwritting its content 10 times

Shred can be used to shred a given partition or an complete disk. This should insure that not data is left on your disk
This is sample output - yours may be different.
-2

sudo shred -zn10 /dev/sda

dcabanis · 2009-04-30 13:02:43 8
Get ethX mac addresses

Show Sample Output
This is sample output - yours may be different.
```
00:1e:68:1a:88:69
```
-2

sudo ifconfig -a | grep eth | grep HW | cut -d' ' -f11

rubenmoran · 2009-11-04 19:24:35 3
umount all nfs mounts on machine
This is sample output - yours may be different.
-2

mount | awk '/:/ { print $3 } ' | xargs sudo umount

uid0 · 2009-11-05 17:19:11 3
Mount a Windows share on the local network (Ubuntu)

Mount a Windows share. Usually the IP is needed for the $ip_or_host option. Getting hostnames working on a local network never seems to work.
This is sample output - yours may be different.
-2

sudo mount -t cifs //$ip_or_host/$sharename /mnt

sb · 2009-11-23 14:24:02 3
Mount a Windows share on the local network (Ubuntu) with user rights and use a specific samba user

mounts a samba share on a remote machine using a credentials file that can be in a file tht is not accessable by other users the file will look like: username="username" password="password" best option i belive
This is sample output - yours may be different.
-2

sudo mount -t cifs -o credentials=/path/to/credenials //hostname/sharename /mount/point

magma_camel · 2009-11-23 23:55:20 3
Open file with sudo when there is no write-permission

this avoids several VIM warnings, which I seem too stupid to disable: warning, readonly! and: file and buffer have changed, reload?!
This is sample output - yours may be different.
-2

if test -w $1; then vim $1; else sudo vim $1; fi

srepmub · 2010-08-14 13:28:32 4
Bulk install

I used this to mass install a lot of perl stuff. Threw it together because I was feeling *especially* lazy. The 'perl' and the 'module' can be replaced with whatever you like.
This is sample output - yours may be different.
-2

apt-cache search perl | grep module | awk '{print $1;}' | xargs sudo apt-get install -y

captwheeto · 2010-11-26 14:00:39 3
Changing Hostname on Mac OS X
This is sample output - yours may be different.
-2

sudo scutil --set HostName MY_NEW_HOSTNAME

ohe · 2011-03-15 21:45:14 3
shutdown pc in a 4 hours

Benefit is that it doesn't make you keep the terminal open.
This is sample output - yours may be different.
-2

echo "shutdown -h now" | sudo at now + 4 hours

depesz · 2011-05-02 15:29:48 3
Fix grub2 boot failure using live cd

From live CD mount(open) the Ubuntu installed drive. Copy the location (press Ctrl+l, Ctrl+c ) eg: /media/ubuntuuuu Open terminal (Apllication->accessories->terminal) Type this: sudo grub-install --root-directory=/media/ubuntuuuu /dev/sda (replace /media/ubuntuuuu with what u got (ie paste)) Will show success message. Now reboot
This is sample output - yours may be different.
-2

sudo grub-install --root-directory=/media/ubuntu /dev/sda

totti · 2011-09-27 17:51:56 3
don't auto run gdm

run `sudo update-rc.d gdm defaults` to get it back
This is sample output - yours may be different.
-2

sudo update-rc.d -f gdm remove

kev · 2011-12-16 10:12:21 3
open ports with iptables

This command will open tcp port 3000 in your machine
This is sample output - yours may be different.
-2

sudo iptables -I INPUT -p tcp --dport 3000 -j ACCEPT

Dhinesh · 2011-12-16 10:39:13 30
I am using a desktop?
This is sample output - yours may be different.
-2

sudo hal-get-property --udi /org/freedesktop/Hal/devices/computer --key 'system.formfactor'

0disse0 · 2012-02-06 19:44:44 3
Add a custom package repository to apt sources.list

For instance, to add mongodb 10gen package echo "deb http://downloads-distro.mongodb.org/repo/ubuntu-upstart dist 10gen" | sudo tee -a /etc/apt/sources.list Show Sample Output
This is sample output - yours may be different.
```
[some repository]
```
-2

echo "[some repository]" | sudo tee -a /etc/apt/sources.list

jjperezaguinaga · 2012-04-21 17:54:08 5
find files owned by root and make them your own again

be careful where you execute this from do a 'sudo ls' beforehand to prime sudo to not ask for your password
This is sample output - yours may be different.
-2

find . -user root | xargs sudo chown me:me

riansanderson · 2012-04-24 18:29:13 6
Check if TCP port 25 is open
This is sample output - yours may be different.
-2

sudo lsof -iTCP:25

netaxiz · 2013-11-20 08:26:37 9
List ReverseSSH ports

gets network ports only ones for the sshd service only logged in a specific user (changed for public posting) only in a specific localhost:port range not IPv6 Only the part of the response after the ":" character Only the part of the response before the 1st space Output is just the rssh port
This is sample output - yours may be different.
-2

sudo lsof -i -n | grep sshd | grep sshuser | grep :[PORT-RANGE] | grep -v IPv6 | awk -F\: '{print $2}' | grep -v http | awk -F" " '{print $1}'

das_shark · 2015-04-09 15:41:11 24
how to Disable a guest user from the login panel Xubuntu

This command will disable a guest user logon, this user don't have password to login in the system. Show Sample Output
This is sample output - yours may be different.
```
sh -c 'printf "[SeatDefaults]\nallow-guest=false\n" >/usr/share/lightdm/lightdm.conf.d/50-no-guest.conf'
sh -c 'printf "[SeatDefaults]\nallow-guest=false\n" >/usr/share/lightdm/lightdm.conf.d/50-guest-wrapper.conf'
```
-2

sudo sh -c 'printf "[SeatDefaults]\nallow-guest=false\n" >/usr/share/lightdm/lightdm.conf.d/50-no-guest.conf'; sudo sh -c 'printf "[SeatDefaults]\nallow-guest=false\n" >/usr/share/lightdm/lightdm.conf.d/50-guest-wrapper.conf'

andregyn62 · 2015-08-31 18:12:21 12
hardcode dnsserver, no more rewriting of etc/resolv.conf

runs in background rewriting /etc/resolv.conf periodically dns
This is sample output - yours may be different.
-2

while sudo sed -i -e 's/^$nameserver$.*$/\1 $dns/' /etc/resolv.conf; do sleep 15; done &

dav23r · 2018-05-14 16:03:08 160
restart Bluetooth from terminal
This is sample output - yours may be different.
-2

$ sudo systemctl restart bluetooth

jadnb · 2019-09-23 19:18:56 116
QEMU From Fedora Livecd + Device CD + Device Disk + UEFI + 800x600 forced

Entire command: sudo qemu-system-x86_64 -enable-kvm -cpu host -M q35 -m 2G -smp 4 --bios /usr/share/edk2/ovmf/OVMF_CODE.fd -drive id=cdrom,file=/dev/sr1,if=none,media=cdrom,format=raw,readonly=on -drive id=disk,file=/dev/md126,if=none,format=raw -device virtio-blk-pci,drive=cdrom -device virtio-blk-pci,drive=disk -device VGA,vgamem_mb=64,xres=800,yres=600
This is sample output - yours may be different.
-2

sudo qemu-system-x86_64 ...

pqatsi · 2022-09-02 20:07:02 502
Enable Hibernate in OS X
This is sample output - yours may be different.
-3

sudo pmset -a hibernatemode 1

therod · 2009-04-28 19:53:57 5
Save iptables firewall info

Stores the currently active iptables rules to a file that will be applied upon reboot
This is sample output - yours may be different.
-3

sudo iptables-save > /etc/iptables.up.rules

kamiller · 2009-08-19 14:55:05 4
Mount an external FAT32 USB HDD
This is sample output - yours may be different.
-3

sudo mount -t vfat /dev/sdb1 /mnt/sdb1

steffoz · 2009-10-25 19:56:06 4
‹ First < 18 19 20 21 22 >

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

vim's pastetoggle: when you press f9 'paste' is on , press f9 again and 'paste' is off, and so forth (works in insert-mode and command-mode)

Rename files in batch

convert single digit to double digits

each number in a file name gets expanded to the number of digets provided as arg_1 of the arguments in rjust_file_nums. Put the funciton in the .bashrc file. Be sure to $ source ~/.bashrc so that the function will be accessible from bash.

Convert ascii string to hex

Here's a version that uses perl. If you'd like a trailing newline: $ perl -pe 's/(.)/sprintf("\\x%x", ord($1))/eg; END {print "\n"}'

Find name of package which installed a given shell command

Some command names are very different from the name of the package that installed them. Sometimes, you may want to find out the name of the package that provided a command on a system, so that you can install it on another system.

Advanced python tracing

Trace python statement execution and syscalls invoked during that simultaneously

Size (in bytes) of all RPM packages installed

This command will output the size of all RPM packages and string them together into one enormous addition command which will be calculated by the echo $(( ))

Simple Video Surveillance by email

This takes a picture (with the web cam) every 5 minutes, and send the picture to your e-mail. Some systems support mail -a "References: " so that all video surveillance emails are grouped in a single email thread. To keep your inbox clean, it is still possible to filter and move to trash video surveillance emails (and restore these emails only if you really get robbed!) For instance with Gmail, emails sent to me+trash@gmail.com can be filtered with "Matches: DeliveredTo:me+trash@gmail.com"

Recursively grep thorugh directory for string in file.

Print line numbers also, so you don't have to search through the files once its open for the string you already grepped for.

Get your public ip

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using sudo

Commands using sudo (537) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using sudo (537)

sorted by