Commands using sudo (537)

  • Installs lamp on Ubuntu


    0
    sudo apt-get install lamp-server^ phpmyadmin
    imericurnot · 2012-11-15 01:08:00 10
  • Ettercap MITM


    0
    sudo ettercap -T -Q -M arp -i wlan0 // //
    jorgemendoza · 2012-11-20 23:42:53 14
  • Extract all archives from current folder, each archive in its own folder.

    Magic line will extract almost all possible archives from current folder in its own folders. Don't forget to change USER name in sudo command. sed is used to create names for folders from archive names w/o extension. You can test sed expression, used in this command: arg='war.lan.net' ; x=$(echo $arg|sed 's/\(.*\)\..*/\1/') ; echo $x If some archives can't be extracted, install packages: apt-get install p7zip-full p7zip-rar Hope this will save a lot of your time. Enjoy.


    0
    for ARG in * ; do sudo -u USER 7z x -o"$(echo $ARG|sed 's/\(.*\)\..*/\1/')" "$ARG" ; done
    n158 · 2012-12-31 19:47:24 7
  • Locate command for MAC OSX

    MAC OSX doesn't come with a locate command, This will do the same thing as the locate command on a typical Linux OS. Simply add it to your ~/.bash_profile


    0
    alias locate='if [ $((`date +%s`-`eval $(stat -s /var/db/locate.database); echo $st_mtime`)) -gt 3600 ]; then echo "locate: db is too old!">/dev/stderr; sudo /usr/libexec/locate.updatedb; fi; locate -i'
    jhyland87 · 2013-01-21 17:45:50 4
  • Create a package list for offline download


    0
    sudo apt-get <apt-get command and options> --print-uris -qq | sed -n "s/'\([^ ]\+\)' \([^ ]\+\) \([^ ]\+\) MD5Sum:\([^ ]\+\)/wget -c \1/p" > dowload_deb_list.txt
    totti · 2013-02-09 09:36:53 4
  • macports update


    0
    sudo port selfupdate ; echo '---------' ; sudo port upgrade outdated
    roozbeh · 2013-03-21 04:07:54 4
  • Rename your Raspberry Pi

    Your computer's name is raspberrypi and you want to rename it to pita1. This command will change both the hostname and the name used for netwrk communications.


    0
    sudo sed -i 's/raspberrypi/pita1/' /etc/hosts /etc/hostname; sudo reboot
    egeoffray · 2013-04-16 07:27:41 6
  • Installation Ksuperkey by one command in Kubuntu.

    Install Ksuperkey one command in Kubuntu. You must manually add ksuperkey to autostart in System Settings KDE.


    0
    sudo apt-get install git gcc make libx11-dev libxtst-dev pkg-config -y && git clone https://github.com/hanschen/ksuperkey.git && cd ksuperkey && make && sudo mv ksuperkey /usr/bin/ksuperkey && cd ~ && rm -rf ksuperkey
    FadeMind · 2013-04-17 07:12:46 6
  • Run skype using your GTK theme

    Replace default command in skype.desktop file.


    0
    sudo sed -i 's/Exec=skype %U/Exec=skype --disable-cleanlooks -style GTK %U/' /usr/share/applications/skype.desktop
    FadeMind · 2013-04-17 08:43:00 6
  • Information about RAM HW.

    Advanced information about RAM.


    0
    sudo dmidecode --type 17
    FadeMind · 2013-04-18 20:13:07 4
  • Wait the set time and then Power off

    wait a hour and 10 seconds to shutdown Show Sample Output


    0
    sudo shutdown -h <hour:minute>
    devlucas · 2013-04-19 18:54:38 26
  • Shutdown ubuntu


    0
    sudo shutdown -h now
    permanaj · 2013-04-23 02:34:48 5
  • Clear linux cache


    0
    sudo su; sync; echo 3 > /proc/sys/vm/drop_caches
    ab_simas · 2013-04-23 14:07:15 4
  • Create user


    0
    sudo useradd -U -m -s /bin/bash new_user
    monmo · 2013-04-29 06:32:49 7
  • Command used to sync arch ro manjaro mirrors

    Show Sample Output


    0
    sudo pacman-mirrors -g
    unixmonkey57489 · 2013-05-16 13:55:39 7
  • To install guest additions in arch or manjaro linux, run the following command:

    Here you have to choose the correct kernel number, for example linux38.


    0
    sudo pacman -S virtualbox-guest-utils
    unixmonkey57489 · 2013-05-16 14:39:38 14
  • View all file descriptors owned by a process

    Inner "ps...grep..." command searches for a process matching the specified . "lsof -p lists all file descriptors owned by . Includes open files, sockets, devices, etc... Show Sample Output


    0
    sudo lsof -p `sudo ps aux | grep -i neo4j | grep -v grep | awk '{ print $2 }'`
    andycunn · 2013-06-02 10:15:30 7
  • Show counts of messages in exim mail queue, grouped by recipient

    Counts of messages by recipient, with frozen messages excluded. Show Sample Output


    0
    sudo /usr/sbin/exim -bp | sed -n '/\*\*\* frozen \*\*\*/,+1!p' | awk '{print $1}' | tr -d [:blank:] | grep @ | sort | uniq -c | sort -n
    blueskin · 2013-06-04 10:49:14 8
  • List partition superblocks


    0
    sudo dumpe2fs /dev/sda1 | grep superblock
    rugina · 2013-06-25 08:48:49 182
  • Macports update and clean all packages


    0
    sudo port selfupdate && sudo port upgrade outdated && sudo port clean --all installed && sudo port -f uninstall inactive
    noah · 2013-06-26 01:12:33 10
  • Getting OpenPGP keys for Launchpad PPAs on Debian based systems from behind a firewall

    If you are an unlucky soul behind a corporate firewall you will likely find that downloading gpg keys is blocked. This is because the hkp protocol uses port 11371 by default to transfer the key. By adding "hkp://" to the beginning of the hostname and ":80" to the end you are asking gpg to try using port 80 to connect (less likely to be blocked by a firewall). This relies on the remote server answering to requests over port 80. Show Sample Output


    0
    sudo apt-key adv --keyserver hkp://keys.gnupg.net:80 --recv-keys [key to get here]
    phattmatt · 2013-07-23 08:29:40 7
  • make pretty the netstat output for listening services

    bit of a contrived example and playing to my OCD but nice for quick scripted output of listening ports which is sorted by port, ip address and protocol. Show Sample Output


    0
    sudo netstat -plntu --inet | sort -t: -k2,2n | sort --stable -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n | sort -s -t" " -k1,1
    thechile · 2013-08-13 09:21:26 8
  • Backup /etc directory

    Back up /etc directory with a name based on the current date and the hostname of the machine, then chown the file for the current user for use.


    0
    sudo tar -zcvf $(hostname)-etc-back-`date +%d`-`date +%m`-`date +%y`.tar.gz /etc && sudo chown $USER:$USER $(hostname)-etc-back*
    thanosme · 2013-08-18 12:49:11 19
  • Adding user to printer, after installing hp-lip (Debian)


    0
    sudo adduser [username] lp && sudo adduser [username] lpadmin && sudo hp-setup -i
    Romero · 2013-08-25 14:21:25 10
  • Install build dependencies for a given package

    Install all build dependencies for a given package Show Sample Output


    0
    sudo apt-get build-dep rhythmbox
    darlanalves · 2013-10-07 23:13:19 6
  • ‹ First  < 12 13 14 15 16 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Find the package that installed a command

Count the number of deleted files
It does not work without the verbose mode (-v is important)

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Find out current working directory of a process

See how many more processes are allowed, awesome!
There is a limit to how many processes you can run at the same time for each user, especially with web hosts. If the maximum # of processes for your user is 200, then the following sets OPTIMUM_P to 100. $ OPTIMUM_P=$(( (`ulimit -u` - `find /proc -maxdepth 1 \( -user $USER -o -group $GROUPNAME \) -type d|wc -l`) / 2 )) This is very useful in scripts because this is such a fast low-resource-intensive (compared to ps, who, lsof, etc) way to determine how many processes are currently running for whichever user. The number of currently running processes is subtracted from the high limit setup for the account (see limits.conf, pam, initscript). An easy to understand example- this searches the current directory for shell scripts, and runs up to 100 'file' commands at the same time, greatly speeding up the command. $ find . -type f | xargs -P $OPTIMUM_P -iFNAME file FNAME | sed -n '/shell script text/p' I am using it in my http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html especially for the xargs command. Xargs has a -P option that lets you specify how many processes to run at the same time. For instance if you have 1000 urls in a text file and wanted to download all of them fast with curl, you could download 100 at a time (check ps output on a separate [pt]ty for proof) like this: $ cat url-list.txt | xargs -I '{}' -P $OPTIMUM_P curl -O '{}' I like to do things as fast as possible on my servers. I have several types of servers and hosting environments, some with very restrictive jail shells with 20processes limit, some with 200, some with 8000, so for the jailed shells my xargs -P10 would kill my shell or dump core. Using the above I can set the -P value dynamically, so xargs always works, like this. $ cat url-list.txt | xargs -I '{}' -P $OPTIMUM_P curl -O '{}' If you were building a process-killer (very common for cheap hosting) this would also be handy. Note that if you are only allowed 20 or so processes, you should just use -P1 with xargs.

Count the total number of files in each immediate subdirectory
counts the total (recursive) number of files in the immediate (depth 1) subdirectories as well as the current one and displays them sorted. Fixed, as per ashawley's comment

for too many arguments by *
$ grep ERROR *.log -bash: /bin/grep: Argument list too long $ echo *.log | xargs grep ERROR /dev/null 20090119.00011.log:DANGEROUS ERROR

create ext4 filesystem with big count of inodes
XX is your device partition number like /dev/sdc1 . to see how many inodes your partition have type: $ df --inodes (or df -i) Default formatting with ext4 would create small inode count for the new partition if you need big count of inodes is the fstype news the correct one. in debian you can see which fstype exists as template in: $ vim /etc/mke2fs.conf if you format default ext for a partition size with 1TB you would get 1 Million inodes (not enough for backupStorages) but if you format with fstype news you would get hunderd of millions of inodes for the partition. you have tune $/etc/sysctl.conf also with following sysconfig parameters $ fs.file-max = XXX $ fs.nr_open = XXX where XXX is the count of max inodes for whole system

A signal trap that logs when your script was killed and what other processes were running at that time
trap is the bash builtin that allows you to execute commands when the current script receives a particular signal. Uses $0 for the script name, $$ for the script PID, tee to output to STDOUT as well as a log file and ps to log other running processes.

take a look to command before action
add |sh when you agree the list, I often use that method to prevent typos in dangerous or long operations

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: