tacacs+ Auth to (Cisco ACS) from Foundry (Brocade) RX and MLX BigIron L3 (routers & switches)

aaa authentication login default local tacacs+
You need all those commands, in the sample output. I had some of this, but had to play, add remove, type random stuff like a monkey to finally get this working (clearly those IP's are fake to protect the guilty, and so is the key).
Sample Output
aaa authentication login default local tacacs+
aaa authentication login privilege-mode
tacacs-server host 192.765.437.123
tacacs-server host 192.764.954.321
tacacs-server key 1 <some Key G>

-3
By: rootgeek
2010-03-26 02:58:03

These Might Interest You

  • The sample output, is the command with a ?, to show you all the stuff you can look at. Show Sample Output


    -4
    dm ?
    rootgeek · 2010-03-26 02:42:21 0
  • Use this command to view information regarding RSTP (802.1W). Show Sample Output


    -4
    show 802-1w
    rootgeek · 2010-03-28 17:54:03 0
  • Okay, Jimmy, the command 'optical-monitor' is needed within the global config. for this command to work (and if supported by your licsense: yada yada, blah, blah). But, like its mad PHAT Kid, you dig? Basically, a Foundry/Brocade switch is reading the Laser light levels just like those Fiber test kits from Owl that cost 4k. I know, I also find it hard to contain myeself ;-) No really..... Show Sample Output


    -3
    show optic <slot #>
    rootgeek · 2010-03-26 03:07:22 0

  • -4
    sh default values
    rootgeek · 2010-03-26 02:36:57 0

What do you think?

Any thoughts on this command? Does it work on your machine? Can you do the same thing with only 14 characters?

You must be signed in to comment.

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands



Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: