All commands

All commands (14,187)

sorted by

detect the Super I/O chip on your computer, tell you at which configuration port it is located and can dump all the register contents.
This is sample output - yours may be different.
-3

superiotool

theIndianMaiden · 2009-08-16 02:30:22 4
parses the BIOS memory and prints information about all structures (or entry points) it knows of.
This is sample output - yours may be different.
-3

biosdecode

theIndianMaiden · 2009-08-16 02:28:00 14
x86info

specific information about your intel CPUs in your system and their features
This is sample output - yours may be different.
-2

x86info

theIndianMaiden · 2009-08-16 02:19:39 3
get basic information out of your computer
This is sample output - yours may be different.
-3

lspci

theIndianMaiden · 2009-08-16 02:01:58 3
Edit Crontab
This is sample output - yours may be different.
-6

crontab -e

theIndianMaiden · 2009-08-16 01:20:42 4
Emulate perl 'print "#" x 20, "\n"'
This is sample output - yours may be different.
0

printf '%*s\n' 20 | tr ' ' '#'

twfcc · 2009-08-15 22:38:01 3
avi to ogv (Ogg Theora)

Requirements: ffmpeg2theora (http://v2v.cc/~j/ffmpeg2theora/)
This is sample output - yours may be different.
0

ffmpeg2theora input.avi

chutsu · 2009-08-15 19:58:07 3
Find the process you are looking for minus the grepped one

Get the PID of a process by name Show Sample Output
This is sample output - yours may be different.
```
4234
```
11

pgrep command_name

dstahlke · 2009-08-15 17:03:57 8
Shrink more than one blank lines to one in VIM.
This is sample output - yours may be different.
2

:%v/./,/./-j

satyavvd · 2009-08-15 15:02:20 6
formatting number with comma

it is not work with Cygwin's bash3.X. Test in Linux. use printf "%'f" number while it is floating point number Show Sample Output
This is sample output - yours may be different.
```
1,234,567
```
3

printf "%'d\n" 1234567

twfcc · 2009-08-15 14:48:56 4
An easter egg built into python to give you the Zen of Python
This is sample output - yours may be different.
13

python -c 'import this'

cofi · 2009-08-15 10:31:21 23
An easter egg built into python to give you the Zen of Python

Very very cool list of quotations and directives on pythonic programming. I love them and they are sure applicable in C++ too, and for most any programming, really.
This is sample output - yours may be different.
0

echo "import this" | python

loquitus · 2009-08-15 09:42:36 4
Extract dd-image from VirtualBox VDI container and mount it

Tested with NTFS and found on this site: http://forensicir.blogspot.com/2008/01/virtualbox-and-forensics-tools.html The first 32256 bytes is the MBR
This is sample output - yours may be different.
7

vditool COPYDD my.vdi my.dd ; sudo mount -t ntfs -o ro,noatime,noexex,loop,offset=32256 my.dd ./my_dir

Cowboy · 2009-08-14 21:33:43 9
checks if host /service is up on a host that doesn't respond to ping

the command for the impatient sysadmin: simply checks every five secs, if a host or a specific service running on it is up. ideal for hosts that are configured not to respond on pings. Show Sample Output
This is sample output - yours may be different.
```
Starting Nmap 4.76 ( http://nmap.org ) at 2009-08-14 22:14 CEST
Interesting ports on 192.168.0.1:
PORT   STATE SERVICE
80/tcp open  http
```
0

while true; do clear; nmap ${hostname} -PN -p ${hostport}; sleep 5; done

flokra · 2009-08-14 20:19:59 3
Will email user@example.com when all Rsync processes have finished.

This will email user@example.com a message with the body: "rsync done" when there are no processes of rsync running. This can be changed for other uses by changing $(pgrep rsync) to something else, and echo "rsync done" | mailx user@example.com to another command.
This is sample output - yours may be different.
0

$(while [ ! -z "$(pgrep rsync)" ]; do echo; done; echo "rsync done" | mailx user@example.com) > /dev/null &

matthewbauer · 2009-08-14 19:46:59 4
add a backup (or any other) suffix to a file

Very helpful when you've got complex filenames and needs to change just some small parts of it. Renaming a file called "i-made-a-small-typo-right-here" to "i-made-a-big-typo-right-here": mv -vi i-made-a-{small,big}-typo-right-here You could also copy multiple files, edit, remove, process, etc. Show Sample Output
This is sample output - yours may be different.
```
$ mv -vi file{,~}
`file' -> `file~'
$ 
```
1

mv -vi file{,~}

fsilveira · 2009-08-14 19:29:59 4
Have netcat listening on your ports and use telnet to test connection

This will start a netcat process listening on port 666. If you are able connect to your your server, netcat will receive the data being sent and spit it out to the screen (it may look like random garbage, so you might want to redirect it to a file).
This is sample output - yours may be different.
1

SERVER: nc -l p 666 CLIENT: telnet -l -p 666

Cowboy · 2009-08-14 17:01:57 5
make 100 directories with leading zero, 001...100, using bash3.X

no external commands, but can only do 0-99, not 1-100, so we adjust it later Show Sample Output
This is sample output - yours may be different.
```
 
```
-4

mkdir 0{0..9}{0..9};mv 000 100

sitaram · 2009-08-14 16:33:20 7
return external ip

alternative using 'host' Show Sample Output
This is sample output - yours may be different.
```
67.207.139.81
```
-1

host -t a dartsclink.com | sed 's/.*has address //'

dartsclink · 2009-08-14 16:11:18 13
Find the process you are looking for minus the grepped one

preferred way to query ps for a specific process name (not supported with all flavors of ps, but will work on just about any linux afaik) Show Sample Output
This is sample output - yours may be different.
```
ion@atomos:~$ ps -C ps
  PID TTY          TIME CMD
14524 pts/1    00:00:00 ps

ion@atomos:~$ ps -fC ps
UID        PID  PPID  C STIME TTY          TIME CMD
ion      14544 13940  0 11:23 pts/1    00:00:00 ps -fC ps
```
6

ps -C command

recursiverse · 2009-08-14 15:30:42 6
Generate a Universally Unique Identifier (UUID)

http://en.wikipedia.org/wiki/Universally_Unique_Identifier http://www.ossp.org/pkg/lib/uuid/ You'll first need to install the uuid package. Available immediately from apt in Ubuntu, Debian, or other myriad Debian variants. You could always compile it from source as well. Show Sample Output
This is sample output - yours may be different.
```
bfcca18a-8857-11de-bdc3-0024e80e2d83
```
-1

uuid

linuxrawkstar · 2009-08-14 14:02:37 7
Searches $PATH for files using grep

Best to put it in a file somewhere in your path. (I call the file spath) #!/bin/bash IFS=:; find $PATH | grep $1 Usage: $ spath php Show Sample Output
This is sample output - yours may be different.
```
$ IFS=:; find $PATH | grep php
/usr/bin/php
/usr/bin/php5
/usr/bin/phpdoc
/usr/bin/phpuc
/usr/bin/phpcs
/usr/bin/phpunit
```
1

IFS=:; find $PATH | grep pattern

camspiers · 2009-08-14 13:38:58 10
Lists the size of certain file in every 10 seconds

watch is a command especially designed for doing this job
This is sample output - yours may be different.
2

watch -n 10 'du -sk testfile'

ianux · 2009-08-14 12:35:21 3
Lists the size of certain file in every 10 seconds

This command produces the output of "du -sk testfile" in every 10 seconds. You can change the command to be whatever you want.
This is sample output - yours may be different.
-2

while true ; do du -sk testfile ; sleep 10 ; done

Solaris · 2009-08-14 11:39:52 5
make 100 directories with leading zero, 001...100, using bash3.X
This is sample output - yours may be different.
3

mkdir $(printf '%03d\n' {1..100})

twfcc · 2009-08-14 11:35:43 4
‹ First < 463 464 465 466 467 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Change Title of Terminal Window to Verbose Info useful at Login

I usually have 5 or more ssh connections to various servers, and putting this command in my .bash_profile file makes my putty window or x terminal window title change to this easily recognizable and descriptive text. Includes the username, group, server hostname, where I am connecting from (for SSH tunneling), which device pts, current server load, and how many processes are running. You can also use this for your PROMPT_COMMAND variable, which updates the window title to the current values each time you exec a command. I prefix running this in my .bash_profile with $ [[ ! -z "$SSH_TTY" ]] && which makes sure it only does this when connecting via SSH with a TTY. Here's some rougher examples from http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html $ # If set, the value is executed as a command prior to issuing each primary prompt. $ #H=$((hostname || uname -n) 2>/dev/null | sed 1q);W=$(whoami) $ #export PROMPT_COMMAND='echo -ne "\033]0;${W}@${H}:${PWD/#$HOME/~} ${SSH_TTY/\/dev\//} [`uptime|sed -e "s/.*: $[^,]*$.*/\1/" -e "s/ //g"`]\007"' $ #PROMPT_COMMAND='echo -ne "\033]0;`id -un`:`id -gn`@`hostname||uname -n 2>/dev/null|sed 1q` `command who -m|sed -e "s%^.* $pts/[0-9]*$.*($.*$)%[\1] (\2)%g"` [`uptime|sed -e "s/.*: $[^,]*$.*/\1/" -e "s/ //g"` / `command ps aux|wc -l`]\007"' $ #[[ -z "$SSH_TTY" ]] || export PROMPT_COMMAND $ #[[ -z "$SSH_TTY" ]] && [[ -f /dev/stdout ]] && SSH_TTY=/dev/stdout And here's a simple function example for setting the title: $ function set_window_title(){ echo -e "\033]0; ${1:-$USER@$HOST - $SHLVL} \007"; }

Combining text files into one file

Recursively chmod all dirs to 755 and all files to 644

Shuffle mp3 files in current folder and play them.

* grep -i leaves only mp3 files (case insentitive) * sort -R randomizes list (may use GNU 'shuf' instead). * the sed command will add double quotes around each filename (needed if odd characters are present)

list block devices

Shows all block devices in a tree with descruptions of what they are.

Check tcp-wrapping support

This function returns TRUE if the application supports tcp-wrapping or FALSE if not by reading the shared libraries used by this application.

Show URL/text in clipboard as QR code

Copy a URL (or Thai text, or whatever) and hit the keyboard shortcut for this fu to display it as a QR code. It's an "air gapped" way to send stuff to your phone [unlike google chart API etc.] as long as you watch out for cameras ;). dependencies [sudo apt-get install]: qrencode xclip xloadimage

STAT Function showing ALL info, stat options, and descriptions

This shows every bit of information that stat can get for any file, dir, fifo, etc. It's great because it also shows the format and explains it for each format option. If you just want stat help, create this handy alias 'stath' to display all format options with explanations. $ alias stath="stat --h|sed '/Th/,/NO/!d;/%/!d'" To display on 2 lines: $ ( F=/etc/screenrc N=c IFS=$'\n'; for L in $(sed 's/%Z./%Z\n/'

scp with compression.

-C is for compression.

Calculate days on which Friday the 13th occurs (inspired from the work of the user justsomeguy)

Friday is the 5th day of the week, monday is the 1st. Output may be affected by locale.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by