All commands

All commands (14,187)

sorted by

shell function to make gnu info act like man.

I use this alias in my bashrc. The --vi-keys option makes info use vi-like and less-like key bindings.
This is sample output - yours may be different.
4

alias info='info --vi-keys'

eightmillion · 2010-02-16 16:35:17 4
shell function to make gnu info act like man.

For those who hate navigating info pages, a shell function which will dump the contents to stdout, then page it through less, thus acting like 'man'.
This is sample output - yours may be different.
9

myinfo() { info --subnodes -o - $1 | less; }

bartonski · 2010-02-16 13:09:32 11
Transfer Entire recursive from one host to another. Only copies files that are newer or do not exist

From opposite host To copy remote to local rsync -aE -e "ssh -pPortnumber" user@hostA:directory target_dir
This is sample output - yours may be different.
1

rsync -azE -e "ssh -pPortnumber" src_dir user@hostB:dest_dir

kkk · 2010-02-16 06:30:54 3
Automagically create a /etc/hosts file based on your DHCP list (only works on Linksys WRT54G router)

Will create a sample etc host file based on your router's dhcp list. Now I know this won't work on most routers, so please don't downvote it just because it doesn't work for you. Show Sample Output
This is sample output - yours may be different.
```
192.168.1.8	Wii
192.168.1.7	laptop-dell
192.168.1.145	<none>
192.168.1.6	laptop
192.168.1.9	server
192.168.1.10	laptop-dell
192.168.1.3	TIVO
192.168.1.4	BAUER-DESKTOP
```
0

curl -s -u $username:$password http://192.168.1.1/DHCPTable.htm | grep '<td>.* </td>' | sed 's|\t<td>$.*$ </td>\r|\1|' | tr '\n' ';' | sed 's/$[^;]*$;$[^;]*$;/\2\t\1\n/g'

matthewbauer · 2010-02-16 02:27:11 3
Limit the rate of traffic to a particular address with tc.

Tc is used to configure Traffic Control in the Linux kernel. See man tc for further details. This series of commands will limit the bandwidth of the specified device to the limit you set (300kbit in the second command) to the address you specify.
This is sample output - yours may be different.
0

tc qdisc add dev <dev> root handle 1: cbq avpkt 1000 bandwidth 100mbit;tc class add dev <dev> parent 1: classid 1:1 cbq rate 300kbit allot 1500 prio 5 bounded isolated;tc filter add dev <dev> parent 1: protocol ip prio 16 u32 match ip dst <ip> flowid 1:1

din7 · 2010-02-16 01:39:09 3
Get your commandlinefu points (upvotes - downvotes)

Like command #4845, prints score, number of entries, and average score.
This is sample output - yours may be different.
2

username=bartonski;curl -s http://www.commandlinefu.com/commands/by/$username/json|perl -e 'BEGIN{$s=0;$n=0};END{print "Score: $s\nEntries: $n\nMean: ";printf "%3.2f\n",$s/$n}' -0173 -nae 'foreach $f (@F){if($f =~ /"votes":"(-*\d+)"/){$s += $1; $n++;}}'

bartonski · 2010-02-16 01:03:29 4
shows the full path of shell commands
This is sample output - yours may be different.
0

type <command>

prayer · 2010-02-15 21:47:18 5
shows the full path of shell commands
This is sample output - yours may be different.
-1

whereis command

Matuda · 2010-02-15 19:31:59 3
shows the full path of shell commands

Show Sample Output
This is sample output - yours may be different.
```
which python
/usr/bin/python
```
4

which command

snl · 2010-02-15 19:26:37 3
whois multiple domains

Outputs multiple whois from a plain text file.
This is sample output - yours may be different.
-2

for domain in `cat list_of_domains.txt`; do echo $domain; whois $domain >> output.txt; done

pathcl · 2010-02-15 17:13:45 7
scp with compression.

-C is for compression.
This is sample output - yours may be different.
9

scp -C 10.0.0.4:/tmp/backup.sql /path/to/backup.sql

OJM · 2010-02-15 12:39:46 46
Show the ndd ip settings of a solaris device

This command is jsut for the main IP settings of ndd. if you need ip6 or icmp edit the text within the egrep inclusion area. Felix001 - www.Fir3net.com Show Sample Output
This is sample output - yours may be different.
```
ip_respond_to_echo_broadcast 0
ip_respond_to_echo_multicast 0
ip_respond_to_timestamp 0
ip_send_redirects 0
ip_debug 0
ip_mrtdebug 0
ip_ire_timer_interval 60000
ip_ire_arp_interval 60000
ip_ire_redirect_interval 60000
ip_def_ttl 255
ip_forward_src_routed 0
```
0

for i in `ndd /dev/ip \? | awk '{ print $1 }' | egrep -v "ip6|status|icmp|igmp|\?"` ; do echo $i `ndd -get /dev/ip $i` ; done | grep -v \?

felix001 · 2010-02-15 12:32:33 6
Get length of current playlist in xmms2
This is sample output - yours may be different.
1

xmms2 list | sed -n -e '1i\0' -e 's/^.*($[0-9]*$:$[0-9]*$)$/\1 60*\2++/gp' -e '$a\60op' | dc | sed -e 's/^ *//' -e 's/ /:/g'

mwgamera · 2010-02-15 10:37:48 14
Get URLs matching some xmms2 search
This is sample output - yours may be different.
0

xmms2 info $(xmms2 mlib search '<query>' | sed -ne 's/^00*$[1-9][0-9]*$.*$/\1/p') | awk -F' = ' '$1~/ url$/{print$2}'

mwgamera · 2010-02-15 10:24:15 3
download and unpack tarball without leaving it sitting on your hard drive
This is sample output - yours may be different.
17

wget -qO - http://example.com/path/to/blah.tar.gz | tar xzf -

BoxingOctopus · 2010-02-15 04:00:29 11
Reverse ssh

Both hosts must be running ssh and also the outside host must have a port forwarded to port 22.
This is sample output - yours may be different.
3

#INSIDE-host# ssh -f -N -R 8888:localhost:22 user@somedomain.org # #OUTSIDE-host#ssh user@localhost -p 8888#

Abiden · 2010-02-14 21:43:44 3
GREP a PDF file.

PDF files are simultaneously wonderful and heinous. They are wonderful in being ubiquitous and mostly being cross platform. They are heinous in being very difficult to work with from the command line, search, grep, use only the text inside the PDF, or use outside of proprietary products. xpdf is a wonderful set of PDF tools. It is on many linux distros and can be installed on OS X. While primarily an open PDF viewer for X, xpdf has the tool "pdftotext" that can extract formated or unformatted text from inside a PDF that has text. This text stream can then be further processed by grep or other tool. The '-' after the file name directs output to stdout rather than to a text file the same name as the PDF. Make sure you use version 3.02 of pdftotext or later; earlier versions clipped lines. The lines extracted from a PDF without the "-layout" option are very long. More paragraphs. Use just to test that a pattern exists in the file. With "-layout" the output resembles the lines, but it is not perfect. xpdf is available open source at http://www.foolabs.com/xpdf/
This is sample output - yours may be different.
27

pdftotext [file] - | grep 'YourPattern'

drewk · 2010-02-14 21:42:35 16
Turn shell tracing and verbosity (set -xv) on/off with 1 command!

Turn shell tracing and verbosity (set -xv) on/off in any Bourne-type shell If either -x or -v is set, the function turns them both off. If neither is on, both are turned on.
This is sample output - yours may be different.
4

xv() { case $- in *[xv]*) set +xv;; *) set -xv ;; esac }

cfajohnson · 2010-02-14 20:57:29 3
Geo Temp

Check your local temperature based on geolocation. Show Sample Output
This is sample output - yours may be different.
```
30
```
0

curl -s www.google.com/ig/api?weather=$(curl -s api.hostip.info/get_html.php?ip=$(curl -s icanhazip.com) | sed -e'1d;3d' -e's/C.*: $.*$/\1/' -e's/ /%20/g' -e"s/'/%27/g") | sed 's|.*<t.*f data="$[^"]*$"/>.*|\1\n|'

o0110o · 2010-02-14 19:44:54 4
gzip over ssh

I've kept the gzip compression at a low level, but depending on the cpu power available on the source machine you may want to increase it. However, SQL compresses really well, and I found even with -1 I was able to transfer 40 MiB/s over a 100 mbps wire, which was good enough for me.
This is sample output - yours may be different.
3

ssh 10.0.0.4 "cat /tmp/backup.sql | gzip -c1" | gunzip -c > backup.sql

kennethjor · 2010-02-14 19:09:07 4
Returns the number of cores in a linux machine.

Original article in http://www.howtogeek.com/howto/ubuntu/display-number-of-processors-on-linux/ Show Sample Output
This is sample output - yours may be different.
```
2
```
2

grep -c ^processor /proc/cpuinfo

alebairos · 2010-02-14 16:28:07 24
Get minimum, current, maximum possible resolution of Xorg
This is sample output - yours may be different.
-1

xrandr -q | grep -w Screen

hemanth · 2010-02-14 15:38:49 3
Get your commandlinefu points (upvotes - downvotes)

This will calculate the your commandlinefu votes (upvotes - downvotes). Hopefully this will boost my commandlinefu points. Show Sample Output
This is sample output - yours may be different.
```
37
```
9

username=matthewbauer; curl -s http://www.commandlinefu.com/commands/by/$username/json | tr '{' '\n' | grep -Eo ',"votes":"[0-9\-]+","' | grep -Eo '[0-9\-]+' | tr '\n' '+' | sed 's/+$/\n/' | bc

matthewbauer · 2010-02-14 04:32:36 11
Turn shell tracing and verbosity (set -xv) on/off with 1 command!

Running this command turns shell tracing and shell verbose debugging on or off. Not only does it do that, it also uses your terminals builtin method of setting colors to make debugging much easier. It looks at the current shell options contained in the $- special bash variable and that lets this function set the opposite of the current value. So from the shell you could do a: setx; echo "y" | ( cat -t ) | echo "d"; setx and it will turn on debbuggin. This is an amazingly useful function that is perfect to add system-wide by adding it to /etc/profile or /etc/bashrc.. You can run it from the shell, and you can also use it in your shell scripts like my .bash_profile - http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html Show Sample Output
This is sample output - yours may be different.
```
[2:0:646][srot@host:pts/1][/opt/SOURCE/screen-4.0.3]
$ echo "ulimit `ulimit -a|sed -e 's/.*$-[a-z]$) $.*$/ \1 \2/g'|tr -d \\012`"
echo "ulimit `ulimit -a|sed -e 's/.*$-[a-z]$) $.*$/ \1 \2/g'|tr -d \\012`"
ulimit -a|sed -e 's/.*$-[a-z]$) $.*$/ \1 \2/g'|tr -d \012
>>> sed -e 's/.*$-[a-z]$) $.*$/ \1 \2/g'
>>> ulimit -a
>>> tr -d 012
>>> echo 'ulimit  -c
 -d unlimited
 -e
 -f unlimited
 -i 55648
 -l 3
 -m 37
 -n
 -p 8
 -q 89
 -r
 -s 4
 -t unlimited
 -u
 -v unlimited
 -x unlimited'
ulimit  -c
 -d unlimited
 -e
 -f unlimited
 -i 55648
 -l 3
 -m 37
 -n
 -p 8
 -q 89
 -r
 -s 4
 -t unlimited
 -u
 -v unlimited
 -x unlimited
```
1

function setx(){ sed '/[xv]/!Q2' <<< $- && { set +xv; export PS4=">>> "; } || { export PS4="`tput setaf 3`>>> `tput sgr0`"; set -xv; }; }

AskApache · 2010-02-14 01:25:44 5
Geo Weather

Weather based on your location
This is sample output - yours may be different.
-4

curl -s http://www.google.com/ig/api?weather=$(curl -s "http://api.hostip.info/get_html.php?ip=$(curl -s icanhazip.com)" | grep City | sed 's/City: $.*$/\1/' | sed 's/ /%20/g' | sed "s/'/%27/g") | sed 's|.*<temp_f data="$[^"]*$"/>.*|\1\n|'

matthewbauer · 2010-02-13 21:42:48 11
‹ First < 399 400 401 402 403 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

cpu and memory usage top 10 under Linux

The original version gives an error, here is the correct output

Check which modules your PHP is using

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

Download 10 random wallpapers from images.google.com

Convert CSV to JSON

Replace 'csv_file.csv' with your filename.

Use xdg-open to avoid hard coding browser commands

I rarely use the system menu to start applications. I use keyboard shortcuts instead. Keyboard shortcuts are convenient time savers. To configure the shortcuts I use gconf-editor or CompizConfig Settings Manager (if I have Compiz turned on). Lately I've been using Chromium as my browser. Since Chromium is under heavy development it occasionally becomes unusable and I have to switch back to Firefox. I was hard-coding the browser command in my keyboard shortcuts. This became problematic with frequent browser hopping. I now use the xdg-open command when defining my keyboard shortcuts. xdg-open opens a file or URL in the user's preferred application. In the metacity keybinging_commands I have xdg-open http://gmail.com where I used to have firefox http://gmail.com. Now when switching browsers I don't have to update each keyboard binding command I just change my default browser in Ubuntu by clicking through the menu: System / Preferences / Preferred Applications / Web Browser. xdg-open is more convenient for this browser hopper.

send a message to a windows machine in a popup

It will only work if the service NETSEND in the Windows machine is enabled.

Count lines of code across multiple file types, sorted by least amount of code to greatest

The same as the other two alternatives, but now less forking! Instead of using '\;' to mark the end of an -exec command in GNU find, you can simply use '+' and it'll run the command only once with all the files as arguments. This has two benefits over the xargs version: it's easier to read and spaces in the filesnames work automatically (no -print0). [Oh, and there's one less fork, if you care about such things. But, then again, one is equal to zero for sufficiently large values of zero.]

Sprunge.us - CLI alternative to PasteBin.com

NAME sprunge: command line pastebin: SYNOPSIS | curl -F 'sprunge=

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by