All commands

All commands (14,187)

sorted by

Optimal way of deleting huge numbers of files

Using xargs is better than: find /path/to/dir -type f -exec rm \-f {} \; as the -exec switch uses a separate process for each remove. xargs splits the streamed files into more managable subsets so less processes are required.
This is sample output - yours may be different.
12

find /path/to/dir -type f -print0 | xargs -0 rm

root · 2009-01-26 11:30:47 63
Display PHP files that directly instantiate a given class

This greps all PHP files for a given classname and displays both the file and the usage. Show Sample Output
This is sample output - yours may be different.
```
tao/tests/filter/TestUrl.php:        $this->objFilter = new filter_Url();
tao/classes/local/view/Photos.php:        $objFilter  = new filter_Url();
```
1

find . -name "*.php" -exec grep \-H "new filter_" {} \;

root · 2009-01-26 10:43:09 73
Run the last command as root

Useful when you forget to use sudo for a command. "!!" grabs the last run command.
This is sample output - yours may be different.
1219

sudo !!

root · 2009-01-26 10:26:48 262
Creates a customized search command

Creates a command alias ('cr' in the above example) that searches the contents of files matching a set of file extensions (C & C++ source-code in the above example) recursively within the current directory. Search configured to be in colour, ignore-case, show line numbers and show 4 lines of context. Put in shell initialisation file of your choice. Trivially easy to use, e.g: cr sha1_init Show Sample Output
This is sample output - yours may be different.
```
./openssl/signatures.c-600-xmlSecOpenSSLDsaSha1EvpInit(EVP_MD_CTX *ctx)
./openssl/signatures.c-601-{
./openssl/signatures.c:602:    return SHA1_Init(ctx->md_data);
./openssl/signatures.c-603-}
./openssl/signatures.c-604-
--
./openssl/signatures.c-706-    NULL,
./openssl/signatures.c-707-#else /* XMLSEC_OPENSSL_096 */
./openssl/signatures.c:708:    SHA1_Init,
./openssl/signatures.c-709-    SHA1_Update,
./openssl/signatures.c-710-    SHA1_Final,
```
0

alias cr='find . 2>/dev/null -regex '\''.*\.$c\|cpp\|pc\|h\|hpp\|cc$$'\'' | xargs grep --color=always -ni -C2'

chrisdrew · 2009-01-26 08:54:25 56
Outputs a sorted list of disk usage to a text file

Recursively searches current directory and outputs sorted list of each directory's disk usage to a text file. Show Sample Output
This is sample output - yours may be different.
```
712     .
328     ./test
176     ./lib
144     ./doc
100     ./test/data
96      ./lib/rake
64      ./doc/release_notes
```
6

du | sort -gr > file_sizes

chrisdrew · 2009-01-26 01:12:54 62
Watch how fast the files in a drive are being deleted

This can be useful when a large remove operation is taking place.
This is sample output - yours may be different.
6

watch "df | grep /path/to/drive"

root · 2009-01-25 21:16:41 674
Execute a command at a given time

This is an alternative to cron which allows a one-off task to be scheduled for a certain time.
This is sample output - yours may be different.
266

echo "ls -l" | at midnight

root · 2009-01-25 21:07:42 85
Analyse an Apache access log for the most common IP addresses

This uses awk to grab the IP address from each request and then sorts and summarises the top 10.
This is sample output - yours may be different.
22

tail -10000 access_log | awk '{print $1}' | sort | uniq -c | sort -n | tail

root · 2009-01-25 21:01:52 47
Add SVN keywords property to all PHP and Javascript files
This is sample output - yours may be different.
3

find . $ -name "*.php" -o -name "*.js" $ -exec svn propset svn:keywords Id {} \;

root · 2009-01-24 00:54:35 63
Count files beneath current directory (including subfolders)
This is sample output - yours may be different.
18

find . -type f | wc -l

root · 2009-01-23 17:19:32 74

Display the top ten running processes - sorted by memory usage

ps returns all running processes which are then sorted by the 4th field in numerical order and the top 10 are sent to STDOUT. Show Sample Output

106

ps aux | sort -nk +4 | tail

root · 2009-01-23 17:12:33 295

Checks all MySQL tables

See http://dev.mysql.com/doc/refman/5.0/en/myisamchk.html for further details. You can also repair all tables by running: myisamchk -r *.MYI
This is sample output - yours may be different.
-2

myisamchk /path/to/mysql/files/*.MYI

root · 2009-01-22 10:20:00 133
‹ First < 566 567 568

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Execute text from the OS X clipboard.

The backtick operator, in general, will execute the text inside the backticks. On OS X, the pbpaste command will put the contents of the OS X clipboard to STDOUT. So if you put backticks around pbpaste, the text from the OS X clipboard is executed. If you add the pipeline | pbcopy, the output from executing the command on the clipboard is placed back on the clipboard. Note: make sure the clipboard is text only.

Remove spaces from filenames - through a whole directory tree.

Sometimes, you don't want to just replace the spaces in the current folder, but through the whole folder tree - such as your whole music collection, perhaps. Or maybe you want to do some other renaming operation throughout a tree - this command's useful for that, too. To rename stuff through a whole directory tree, you might expect this to work: for a in `find . -name '* *'`;do mv -i "$a" ${a// /_};done No such luck. The "for" command will split its parameters on spaces unless the spaces are escaped, so given a file "foo bar", the above would not try to move the file "foo bar" to "foo_bar" but rather the file "foo" to "foo", and the file "bar" to "bar". Instead, find's -execdir and -depth arguments need to be used, to set a variable to the filename, and rename files within the directory before we rename the directory. It has to be -execdir and won't work with just -exec - that would try to rename "foo bar/baz quux" to "foo_bar/baz_quux" in one step, rather than going into "foo bar/", changing "baz quux" to "baz_quux", then stepping out and changing "foo bar/" into "foo_bar/". To rename just files, or just directories, you can put "-type f" or "-type d" after the "-depth" param. You could probably safely replace the "mv" part of the line with a "rename" command, like rename 'y/ /_/' *, but I haven't tried, since that's way less portable.

What is my ip?

Do a search-and-replace in a file after making a backup

Use md5sum to check your music and movie files. Also use diff.

This is a beginning script. You can create a file with > filename. You can also use diff to compare output run at different times to verify no change in your files. I apologize in advance if this is too simple. For some it should be a start.

mysqlcheck --defaults-file=/etc/mysql/debian.cnf --auto-repair --all-databases

preprocess code to be posted in comments on this site

Assuming that $script contains the filename of a script you'd like to post as part of a comment on this site, this will prefix each line with '$' and pipe it into the X selection. From there just put the cursor in the right place in the comments box and middle-click. Should work pretty much anywhere with xclip installed. On debian-ish systems this is installed as part of the package "xclip".

Display the inodes number of /

Find default gateway

Gentoo: Get the size of all installed packets, sorted

On a Gentoo system, this command will tell you which packets you have installed and sort them by how much space they consume. Good for finding out space-hogs when tidying up disk space.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by