All commands

All commands (14,187)

sorted by

Optimal way of deleting huge numbers of files

Using xargs is better than: find /path/to/dir -type f -exec rm \-f {} \; as the -exec switch uses a separate process for each remove. xargs splits the streamed files into more managable subsets so less processes are required.
This is sample output - yours may be different.
12

find /path/to/dir -type f -print0 | xargs -0 rm

root · 2009-01-26 11:30:47 63
Display PHP files that directly instantiate a given class

This greps all PHP files for a given classname and displays both the file and the usage. Show Sample Output
This is sample output - yours may be different.
```
tao/tests/filter/TestUrl.php:        $this->objFilter = new filter_Url();
tao/classes/local/view/Photos.php:        $objFilter  = new filter_Url();
```
1

find . -name "*.php" -exec grep \-H "new filter_" {} \;

root · 2009-01-26 10:43:09 73
Run the last command as root

Useful when you forget to use sudo for a command. "!!" grabs the last run command.
This is sample output - yours may be different.
1219

sudo !!

root · 2009-01-26 10:26:48 263
Creates a customized search command

Creates a command alias ('cr' in the above example) that searches the contents of files matching a set of file extensions (C & C++ source-code in the above example) recursively within the current directory. Search configured to be in colour, ignore-case, show line numbers and show 4 lines of context. Put in shell initialisation file of your choice. Trivially easy to use, e.g: cr sha1_init Show Sample Output
This is sample output - yours may be different.
```
./openssl/signatures.c-600-xmlSecOpenSSLDsaSha1EvpInit(EVP_MD_CTX *ctx)
./openssl/signatures.c-601-{
./openssl/signatures.c:602:    return SHA1_Init(ctx->md_data);
./openssl/signatures.c-603-}
./openssl/signatures.c-604-
--
./openssl/signatures.c-706-    NULL,
./openssl/signatures.c-707-#else /* XMLSEC_OPENSSL_096 */
./openssl/signatures.c:708:    SHA1_Init,
./openssl/signatures.c-709-    SHA1_Update,
./openssl/signatures.c-710-    SHA1_Final,
```
0

alias cr='find . 2>/dev/null -regex '\''.*\.$c\|cpp\|pc\|h\|hpp\|cc$$'\'' | xargs grep --color=always -ni -C2'

chrisdrew · 2009-01-26 08:54:25 56
Outputs a sorted list of disk usage to a text file

Recursively searches current directory and outputs sorted list of each directory's disk usage to a text file. Show Sample Output
This is sample output - yours may be different.
```
712     .
328     ./test
176     ./lib
144     ./doc
100     ./test/data
96      ./lib/rake
64      ./doc/release_notes
```
6

du | sort -gr > file_sizes

chrisdrew · 2009-01-26 01:12:54 62
Watch how fast the files in a drive are being deleted

This can be useful when a large remove operation is taking place.
This is sample output - yours may be different.
6

watch "df | grep /path/to/drive"

root · 2009-01-25 21:16:41 674
Execute a command at a given time

This is an alternative to cron which allows a one-off task to be scheduled for a certain time.
This is sample output - yours may be different.
266

echo "ls -l" | at midnight

root · 2009-01-25 21:07:42 86
Analyse an Apache access log for the most common IP addresses

This uses awk to grab the IP address from each request and then sorts and summarises the top 10.
This is sample output - yours may be different.
22

tail -10000 access_log | awk '{print $1}' | sort | uniq -c | sort -n | tail

root · 2009-01-25 21:01:52 47
Add SVN keywords property to all PHP and Javascript files
This is sample output - yours may be different.
3

find . $ -name "*.php" -o -name "*.js" $ -exec svn propset svn:keywords Id {} \;

root · 2009-01-24 00:54:35 63
Count files beneath current directory (including subfolders)
This is sample output - yours may be different.
18

find . -type f | wc -l

root · 2009-01-23 17:19:32 74

Display the top ten running processes - sorted by memory usage

ps returns all running processes which are then sorted by the 4th field in numerical order and the top 10 are sent to STDOUT. Show Sample Output

106

ps aux | sort -nk +4 | tail

root · 2009-01-23 17:12:33 295

Checks all MySQL tables

See http://dev.mysql.com/doc/refman/5.0/en/myisamchk.html for further details. You can also repair all tables by running: myisamchk -r *.MYI
This is sample output - yours may be different.
-2

myisamchk /path/to/mysql/files/*.MYI

root · 2009-01-22 10:20:00 133
‹ First < 566 567 568

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

recursive search and replace old with new string, inside files

If you can install rpl it's simpler to use and faster than combinations of find, grep and sed. See man rpl for various options. time on above operation: real 0m0.862s, user 0m0.548s, sys 0m0.180s using find + sed: real 0m3.546s, user 0m1.752s, sys 0m1.580s

Share a terminal screen with others

If you enable multiuser, then you can permit others to share your screen session. The following conditions apply: 1. screen must be suid root; 2. "multiuser on" must be configured in ~/.screenrc; 3. control the others user(s) access with "aclchg": # ----- from ~/.screenrc-users ----- aclchg someuser +rx "#?" #enable r/o access to "someuser" aclchg someuser -x "#,at,aclchg,acladd,acldel,quit" # don't allow these aclchg otheruser +rwx "#?" # enable r/w access to "otheruser" aclchg otheruser -x "#,at,aclchg,acladd,acldel,quit" # don't allow them to use these commands # ----- After doing this (once), you start your session with: $ screen Then, the other user can join your terminal session(s) with youruserid: $ screen -r youruserid/ Note: the trailing "/" is required. Multiple users can share the same screen simultaneously, each with independent access controlled precisely with "aclchg" in the ~/.screenrc file. I use the following setup: # ~/.screenrc-base # default screenrc on any host source $HOME/.screenrc-base source $HOME/.screenrc-$HOST source $HOME/.screenrc-users # ----- Then, the base configurations are in ~/.screenrc-base; the host-specific configurations are in ~/.screenrc-$HOST, and the user configurations are in ~/.screenrc-users. The host-specific .screenrc file might contain some host-specific screen commands; e.g.: # ~/.screen-myhost # ----- screen -t 'anywhere' /bin/tcsh screen -t 'anywhere1' /bin/tcsh # ---- The .screenrc-base contains: # ~/.screenrc-base ## I find typing ^a (Control-a) awkward. So I set the escape key to CTRL-j instead of a. escape ^Jj termcapinfo xterm* ti@:te@: autodetach on zombie kr verbose on multiuser on

Copy 3 files from 3 different servers and adds server name tag to file copied

Run a command as root, with a delay

$ sleep 1h ; sudo command or $ sudo sleep 1h ; sudo command won't work, because by the time the delay is up, sudo will want your password again.

List all packages by installed size (Bytes) on rpm distros

My random music player

This is my favorite music player I use in my beloved Linux systems,server or desktop Enjoy :-)

Short and elegant way to backup a single file before you change it.

Remember to backup everything before changing it so you can restore all to normal.

Count lines of source code excluding blank lines and comments

Much more accurate than other methods mentioned here straight out of the box.

Find the location of the currently loaded php.ini file

a function to find the fastest DNS server

http://public-dns.info gives a list of online dns servers. you need to change the country in url (br in this url) with your country code. this command need some time to ping all IP in list.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by