All commands

All commands (14,187)

sorted by

Optimal way of deleting huge numbers of files

Using xargs is better than: find /path/to/dir -type f -exec rm \-f {} \; as the -exec switch uses a separate process for each remove. xargs splits the streamed files into more managable subsets so less processes are required.
This is sample output - yours may be different.
12

find /path/to/dir -type f -print0 | xargs -0 rm

root · 2009-01-26 11:30:47 62
Display PHP files that directly instantiate a given class

This greps all PHP files for a given classname and displays both the file and the usage. Show Sample Output
This is sample output - yours may be different.
```
tao/tests/filter/TestUrl.php:        $this->objFilter = new filter_Url();
tao/classes/local/view/Photos.php:        $objFilter  = new filter_Url();
```
1

find . -name "*.php" -exec grep \-H "new filter_" {} \;

root · 2009-01-26 10:43:09 73
Run the last command as root

Useful when you forget to use sudo for a command. "!!" grabs the last run command.
This is sample output - yours may be different.
1219

sudo !!

root · 2009-01-26 10:26:48 250
Creates a customized search command

Creates a command alias ('cr' in the above example) that searches the contents of files matching a set of file extensions (C & C++ source-code in the above example) recursively within the current directory. Search configured to be in colour, ignore-case, show line numbers and show 4 lines of context. Put in shell initialisation file of your choice. Trivially easy to use, e.g: cr sha1_init Show Sample Output
This is sample output - yours may be different.
```
./openssl/signatures.c-600-xmlSecOpenSSLDsaSha1EvpInit(EVP_MD_CTX *ctx)
./openssl/signatures.c-601-{
./openssl/signatures.c:602:    return SHA1_Init(ctx->md_data);
./openssl/signatures.c-603-}
./openssl/signatures.c-604-
--
./openssl/signatures.c-706-    NULL,
./openssl/signatures.c-707-#else /* XMLSEC_OPENSSL_096 */
./openssl/signatures.c:708:    SHA1_Init,
./openssl/signatures.c-709-    SHA1_Update,
./openssl/signatures.c-710-    SHA1_Final,
```
0

alias cr='find . 2>/dev/null -regex '\''.*\.$c\|cpp\|pc\|h\|hpp\|cc$$'\'' | xargs grep --color=always -ni -C2'

chrisdrew · 2009-01-26 08:54:25 56
Outputs a sorted list of disk usage to a text file

Recursively searches current directory and outputs sorted list of each directory's disk usage to a text file. Show Sample Output
This is sample output - yours may be different.
```
712     .
328     ./test
176     ./lib
144     ./doc
100     ./test/data
96      ./lib/rake
64      ./doc/release_notes
```
6

du | sort -gr > file_sizes

chrisdrew · 2009-01-26 01:12:54 62
Watch how fast the files in a drive are being deleted

This can be useful when a large remove operation is taking place.
This is sample output - yours may be different.
6

watch "df | grep /path/to/drive"

root · 2009-01-25 21:16:41 674
Execute a command at a given time

This is an alternative to cron which allows a one-off task to be scheduled for a certain time.
This is sample output - yours may be different.
266

echo "ls -l" | at midnight

root · 2009-01-25 21:07:42 85
Analyse an Apache access log for the most common IP addresses

This uses awk to grab the IP address from each request and then sorts and summarises the top 10.
This is sample output - yours may be different.
22

tail -10000 access_log | awk '{print $1}' | sort | uniq -c | sort -n | tail

root · 2009-01-25 21:01:52 47
Add SVN keywords property to all PHP and Javascript files
This is sample output - yours may be different.
3

find . $ -name "*.php" -o -name "*.js" $ -exec svn propset svn:keywords Id {} \;

root · 2009-01-24 00:54:35 63
Count files beneath current directory (including subfolders)
This is sample output - yours may be different.
18

find . -type f | wc -l

root · 2009-01-23 17:19:32 74

Display the top ten running processes - sorted by memory usage

ps returns all running processes which are then sorted by the 4th field in numerical order and the top 10 are sent to STDOUT. Show Sample Output

106

ps aux | sort -nk +4 | tail

root · 2009-01-23 17:12:33 294

Checks all MySQL tables

See http://dev.mysql.com/doc/refman/5.0/en/myisamchk.html for further details. You can also repair all tables by running: myisamchk -r *.MYI
This is sample output - yours may be different.
-2

myisamchk /path/to/mysql/files/*.MYI

root · 2009-01-22 10:20:00 133
‹ First < 566 567 568

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Print all the lines between 10 and 20 of a file

Similarly, if you want to print from 10 to the end of line you can use: sed -n '10,$p' filename This is especially useful if you are dealing with a large file. Sometimes you just want to extract a sample without opening the entire file. Credit goes to wbx & robert at the comments section of http://www.commandlinefu.com/commands/view/348/get-line1000-from-text.#comment

Create and replay macros in vim

You can record, then replay a series of keystrokes in vim. In command mode 'q', then a letter [a-zA-Z] starts macro recording mode. Enter a series of vim commands. When done, enter command mode again, and press 'q' to stop recording. To replay, enter command mode, then press @{letter}

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Use xdg-open to avoid hard coding browser commands

I rarely use the system menu to start applications. I use keyboard shortcuts instead. Keyboard shortcuts are convenient time savers. To configure the shortcuts I use gconf-editor or CompizConfig Settings Manager (if I have Compiz turned on). Lately I've been using Chromium as my browser. Since Chromium is under heavy development it occasionally becomes unusable and I have to switch back to Firefox. I was hard-coding the browser command in my keyboard shortcuts. This became problematic with frequent browser hopping. I now use the xdg-open command when defining my keyboard shortcuts. xdg-open opens a file or URL in the user's preferred application. In the metacity keybinging_commands I have xdg-open http://gmail.com where I used to have firefox http://gmail.com. Now when switching browsers I don't have to update each keyboard binding command I just change my default browser in Ubuntu by clicking through the menu: System / Preferences / Preferred Applications / Web Browser. xdg-open is more convenient for this browser hopper.

set history file length

set how many commands to keep in history Default is 500 Saved in /home/$USER/.bash_history Add this to /home/$USER/.bashrc HISTFILESIZE=1000000000 HISTSIZE=1000000

list all opened ports on host

convert wmv into xvid avi format

Installing True-Type fonts

First you have to create a directory in your system, where the fonts will be stored, and copy them. $ sudo mkdir /usr/share/fonts/miscttf; sudo cp *.ttf /usr/share/fonts/miscttf After recharge cache with the command

Recover tmp flash videos (deleted immediately by the browser plugin)

Newer versions of the flashplayer browser plugin delete the tmp flash video immediately after opening a filehandle to prevent the user from "exporting" the video by simply copying the /tmp/FlashXYZ file. This command searches such deleted flash videos and creates symbolic links to the opened filehandle with the same name as the deleted file. This allows you to play your flash-videos (from e.g. youtube) with e.g. mplayer or copy the buffered video if you want to keep it.

Calculate days on which Friday the 13th occurs (inspired from the work of the user justsomeguy)

Friday is the 5th day of the week, monday is the 1st. Output may be affected by locale.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by