All commands

All commands (14,187)

sorted by

Optimal way of deleting huge numbers of files

Using xargs is better than: find /path/to/dir -type f -exec rm \-f {} \; as the -exec switch uses a separate process for each remove. xargs splits the streamed files into more managable subsets so less processes are required.
This is sample output - yours may be different.
12

find /path/to/dir -type f -print0 | xargs -0 rm

root · 2009-01-26 11:30:47 63
Display PHP files that directly instantiate a given class

This greps all PHP files for a given classname and displays both the file and the usage. Show Sample Output
This is sample output - yours may be different.
```
tao/tests/filter/TestUrl.php:        $this->objFilter = new filter_Url();
tao/classes/local/view/Photos.php:        $objFilter  = new filter_Url();
```
1

find . -name "*.php" -exec grep \-H "new filter_" {} \;

root · 2009-01-26 10:43:09 73
Run the last command as root

Useful when you forget to use sudo for a command. "!!" grabs the last run command.
This is sample output - yours may be different.
1219

sudo !!

root · 2009-01-26 10:26:48 250
Creates a customized search command

Creates a command alias ('cr' in the above example) that searches the contents of files matching a set of file extensions (C & C++ source-code in the above example) recursively within the current directory. Search configured to be in colour, ignore-case, show line numbers and show 4 lines of context. Put in shell initialisation file of your choice. Trivially easy to use, e.g: cr sha1_init Show Sample Output
This is sample output - yours may be different.
```
./openssl/signatures.c-600-xmlSecOpenSSLDsaSha1EvpInit(EVP_MD_CTX *ctx)
./openssl/signatures.c-601-{
./openssl/signatures.c:602:    return SHA1_Init(ctx->md_data);
./openssl/signatures.c-603-}
./openssl/signatures.c-604-
--
./openssl/signatures.c-706-    NULL,
./openssl/signatures.c-707-#else /* XMLSEC_OPENSSL_096 */
./openssl/signatures.c:708:    SHA1_Init,
./openssl/signatures.c-709-    SHA1_Update,
./openssl/signatures.c-710-    SHA1_Final,
```
0

alias cr='find . 2>/dev/null -regex '\''.*\.$c\|cpp\|pc\|h\|hpp\|cc$$'\'' | xargs grep --color=always -ni -C2'

chrisdrew · 2009-01-26 08:54:25 56
Outputs a sorted list of disk usage to a text file

Recursively searches current directory and outputs sorted list of each directory's disk usage to a text file. Show Sample Output
This is sample output - yours may be different.
```
712     .
328     ./test
176     ./lib
144     ./doc
100     ./test/data
96      ./lib/rake
64      ./doc/release_notes
```
6

du | sort -gr > file_sizes

chrisdrew · 2009-01-26 01:12:54 62
Watch how fast the files in a drive are being deleted

This can be useful when a large remove operation is taking place.
This is sample output - yours may be different.
6

watch "df | grep /path/to/drive"

root · 2009-01-25 21:16:41 674
Execute a command at a given time

This is an alternative to cron which allows a one-off task to be scheduled for a certain time.
This is sample output - yours may be different.
266

echo "ls -l" | at midnight

root · 2009-01-25 21:07:42 85
Analyse an Apache access log for the most common IP addresses

This uses awk to grab the IP address from each request and then sorts and summarises the top 10.
This is sample output - yours may be different.
22

tail -10000 access_log | awk '{print $1}' | sort | uniq -c | sort -n | tail

root · 2009-01-25 21:01:52 47
Add SVN keywords property to all PHP and Javascript files
This is sample output - yours may be different.
3

find . $ -name "*.php" -o -name "*.js" $ -exec svn propset svn:keywords Id {} \;

root · 2009-01-24 00:54:35 63
Count files beneath current directory (including subfolders)
This is sample output - yours may be different.
18

find . -type f | wc -l

root · 2009-01-23 17:19:32 74

Display the top ten running processes - sorted by memory usage

ps returns all running processes which are then sorted by the 4th field in numerical order and the top 10 are sent to STDOUT. Show Sample Output

106

ps aux | sort -nk +4 | tail

root · 2009-01-23 17:12:33 294

Checks all MySQL tables

See http://dev.mysql.com/doc/refman/5.0/en/myisamchk.html for further details. You can also repair all tables by running: myisamchk -r *.MYI
This is sample output - yours may be different.
-2

myisamchk /path/to/mysql/files/*.MYI

root · 2009-01-22 10:20:00 133
‹ First < 566 567 568

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Repeat a portrait eight times so it can be cut out from a 6"x4" photo and used for visa or passport photos

Yes, You could do it in the GIMP or even use Inkscape to auto-align the clones, but the command line is so much easier. NOTE: The +clone and -clone options are just to shorten the command line instead of typing the same filename eight times. It might also speed up the montage by only processing the image once, but I'm not sure. "+clone" duplicates the previous image, the following two "-clone"s duplicate the first two and then the first four images. NOTE2: The -frame option is just so that I have some lines to cut along. BUG: I haven't bothered to calculate the exact geometry (width and height) of each image since that was not critical for the visa photos I need. If it matters for you, it should be easy enough to set using the -geometry flag near the end of the command. For example, if you have your DPI set to 600, you could use "-geometry 800x1200!" to make each subimage 1⅓ x 2 inches. You may want to use ImageMagick's "-density 600" option to put a flag in the JPEG file cuing the printer that it is a 600 DPI image. BUG2: ImageMagick does not autorotate images based on the EXIF information. Since the portrait photo was taken with the camera sideways, I made the JPEG rotate using jhead like so: jhead -autorot 2007-08-25-3685.jpg

Disable sending of start/stop characters

This command disable sending of start/stop characters. It's useful when you want to use incremental reverse history search forward shortcut (Ctrl+s). To enable again, type: $ stty -ixoff

Recursively search for large files. Show size and location.

Mark packages installed with build-dep for autoremove (on Debian/Ubuntu)

Replace PACKAGE with desired package name. Found here: http://mikebeach.org/2011/04/undo-apt-get-build-dep/

Working random fact generator

extension to tali713's random fact generator. It takes the output & sends it to notify-osd. Display time is proportional to the lengh of the fact.

Convert CSV to JSON

Replace 'csv_file.csv' with your filename.

Update your OpenDNS network ip

Intended for dynamic ip OpenDNS users, this command will update your OpenDNS network IP. For getting your IP, you can use one of the many one-liners here on commandlinefu. Example: I use this in a script which is run by kppp after it has successfully connected to my ISP: --- #!/bin/bash IP="`curl -s http://checkip.dyndns.org/ | grep -o '[[:digit:].]\+'`" PW="hex-obfuscated-pw-here" if [ "$IP" == "" ] ; then echo 'Not online.' ; exit 1 else wget -q --user=topsecret --password="`echo $PW | xxd -ps -r`" 'https://updates.opendns.com/nic/update?hostname=myhostname&myip='"$IP" -O - /etc/init.d/ntp-client restart & fi --- PS: DynDNS should use a similar method, if you know the URL, please post a comment. (Something with members.dyndns.org, if I recall correctly)

Rename files in batch

Periodic Log Deletion

deletes logs not modified in over [#] days - modify to compress or move, as needed

Find usb device in realtime

Using this command you can track a moment when usb device was attached.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by