All commands

All commands (14,187)

sorted by

Optimal way of deleting huge numbers of files

Using xargs is better than: find /path/to/dir -type f -exec rm \-f {} \; as the -exec switch uses a separate process for each remove. xargs splits the streamed files into more managable subsets so less processes are required.
This is sample output - yours may be different.
12

find /path/to/dir -type f -print0 | xargs -0 rm

root · 2009-01-26 11:30:47 63
Display PHP files that directly instantiate a given class

This greps all PHP files for a given classname and displays both the file and the usage. Show Sample Output
This is sample output - yours may be different.
```
tao/tests/filter/TestUrl.php:        $this->objFilter = new filter_Url();
tao/classes/local/view/Photos.php:        $objFilter  = new filter_Url();
```
1

find . -name "*.php" -exec grep \-H "new filter_" {} \;

root · 2009-01-26 10:43:09 73
Run the last command as root

Useful when you forget to use sudo for a command. "!!" grabs the last run command.
This is sample output - yours may be different.
1219

sudo !!

root · 2009-01-26 10:26:48 262
Creates a customized search command

Creates a command alias ('cr' in the above example) that searches the contents of files matching a set of file extensions (C & C++ source-code in the above example) recursively within the current directory. Search configured to be in colour, ignore-case, show line numbers and show 4 lines of context. Put in shell initialisation file of your choice. Trivially easy to use, e.g: cr sha1_init Show Sample Output
This is sample output - yours may be different.
```
./openssl/signatures.c-600-xmlSecOpenSSLDsaSha1EvpInit(EVP_MD_CTX *ctx)
./openssl/signatures.c-601-{
./openssl/signatures.c:602:    return SHA1_Init(ctx->md_data);
./openssl/signatures.c-603-}
./openssl/signatures.c-604-
--
./openssl/signatures.c-706-    NULL,
./openssl/signatures.c-707-#else /* XMLSEC_OPENSSL_096 */
./openssl/signatures.c:708:    SHA1_Init,
./openssl/signatures.c-709-    SHA1_Update,
./openssl/signatures.c-710-    SHA1_Final,
```
0

alias cr='find . 2>/dev/null -regex '\''.*\.$c\|cpp\|pc\|h\|hpp\|cc$$'\'' | xargs grep --color=always -ni -C2'

chrisdrew · 2009-01-26 08:54:25 56
Outputs a sorted list of disk usage to a text file

Recursively searches current directory and outputs sorted list of each directory's disk usage to a text file. Show Sample Output
This is sample output - yours may be different.
```
712     .
328     ./test
176     ./lib
144     ./doc
100     ./test/data
96      ./lib/rake
64      ./doc/release_notes
```
6

du | sort -gr > file_sizes

chrisdrew · 2009-01-26 01:12:54 62
Watch how fast the files in a drive are being deleted

This can be useful when a large remove operation is taking place.
This is sample output - yours may be different.
6

watch "df | grep /path/to/drive"

root · 2009-01-25 21:16:41 674
Execute a command at a given time

This is an alternative to cron which allows a one-off task to be scheduled for a certain time.
This is sample output - yours may be different.
266

echo "ls -l" | at midnight

root · 2009-01-25 21:07:42 85
Analyse an Apache access log for the most common IP addresses

This uses awk to grab the IP address from each request and then sorts and summarises the top 10.
This is sample output - yours may be different.
22

tail -10000 access_log | awk '{print $1}' | sort | uniq -c | sort -n | tail

root · 2009-01-25 21:01:52 47
Add SVN keywords property to all PHP and Javascript files
This is sample output - yours may be different.
3

find . $ -name "*.php" -o -name "*.js" $ -exec svn propset svn:keywords Id {} \;

root · 2009-01-24 00:54:35 63
Count files beneath current directory (including subfolders)
This is sample output - yours may be different.
18

find . -type f | wc -l

root · 2009-01-23 17:19:32 74

Display the top ten running processes - sorted by memory usage

ps returns all running processes which are then sorted by the 4th field in numerical order and the top 10 are sent to STDOUT. Show Sample Output

106

ps aux | sort -nk +4 | tail

root · 2009-01-23 17:12:33 295

Checks all MySQL tables

See http://dev.mysql.com/doc/refman/5.0/en/myisamchk.html for further details. You can also repair all tables by running: myisamchk -r *.MYI
This is sample output - yours may be different.
-2

myisamchk /path/to/mysql/files/*.MYI

root · 2009-01-22 10:20:00 133
‹ First < 566 567 568

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Destroy all disks on system simultaneously

This command will use the fdisk utility to find all block devices on your system, and overwrite them with data from the /dev/urandom non-blocking random number generator. CAUTION: This will irrevocably erase EVERY SINGLE physical block storage device visible to the fdisk utility, including plugged USB devices, RAID sets, LVM, etc.

comment current line(put # at the beginning)

List the Sizes of Folders and Directories

I wanted an easy way to list out the sizes of directories and all of the contents of those directories recursively.

print contents of file from line 1 until we match regex

Start printing the contents of filename to stdout, until a matching line to regex is found, then stop.

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

mp3 streaming

Get a list of ssh servers on the local subnet

--open -sV is not needed if you are only looking for hosts with 22 open

Sorted list of established destination connections

no need grep. its redundant when awk is present.

Which fonts are installed?

See all fonts installed in your system

Change Title of Terminal Window to Verbose Info useful at Login

I usually have 5 or more ssh connections to various servers, and putting this command in my .bash_profile file makes my putty window or x terminal window title change to this easily recognizable and descriptive text. Includes the username, group, server hostname, where I am connecting from (for SSH tunneling), which device pts, current server load, and how many processes are running. You can also use this for your PROMPT_COMMAND variable, which updates the window title to the current values each time you exec a command. I prefix running this in my .bash_profile with $ [[ ! -z "$SSH_TTY" ]] && which makes sure it only does this when connecting via SSH with a TTY. Here's some rougher examples from http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html $ # If set, the value is executed as a command prior to issuing each primary prompt. $ #H=$((hostname || uname -n) 2>/dev/null | sed 1q);W=$(whoami) $ #export PROMPT_COMMAND='echo -ne "\033]0;${W}@${H}:${PWD/#$HOME/~} ${SSH_TTY/\/dev\//} [`uptime|sed -e "s/.*: $[^,]*$.*/\1/" -e "s/ //g"`]\007"' $ #PROMPT_COMMAND='echo -ne "\033]0;`id -un`:`id -gn`@`hostname||uname -n 2>/dev/null|sed 1q` `command who -m|sed -e "s%^.* $pts/[0-9]*$.*($.*$)%[\1] (\2)%g"` [`uptime|sed -e "s/.*: $[^,]*$.*/\1/" -e "s/ //g"` / `command ps aux|wc -l`]\007"' $ #[[ -z "$SSH_TTY" ]] || export PROMPT_COMMAND $ #[[ -z "$SSH_TTY" ]] && [[ -f /dev/stdout ]] && SSH_TTY=/dev/stdout And here's a simple function example for setting the title: $ function set_window_title(){ echo -e "\033]0; ${1:-$USER@$HOST - $SHLVL} \007"; }

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by