Commands using awk sorted by votes

Commands using awk (1,418)

sorted by

netstat -p recoded (totaly useless..)

Ok so it's rellay useless line and I sorry for that, furthermore that's nothing optimized at all... At the beginning I didn't managed by using netstat -p to print out which process was handling that open port 4444, I realize at the end I was not root and security restrictions applied ;p It's nevertheless a (good ?) way to see how ps(tree) works, as it acts exactly the same way by reading in /proc So for a specific port, this line returns the calling command line of every thread that handle the associated socket
This is sample output - yours may be different.
-5

p=$(netstat -nate 2>/dev/null | awk '/LISTEN/ {gsub (/.*:/, "", $4); if ($4 == "4444") {print $8}}'); for i in $(ls /proc/|grep "^[1-9]"); do [[ $(ls -l /proc/$i/fd/|grep socket|sed -e 's|.*\[$.*$\]|\1|'|grep $p) ]] && cat /proc/$i/cmdline && echo; done

j0rn · 2009-04-30 12:39:48 640
Kill a daemon by name, not by PID

Just find out the daemon with $ netstat -atulpe. Then type in his name and he gets the SIGTERM.
This is sample output - yours may be different.
-5

kill_daemon() { echo "Daemon?"; read dm; kill -15 $(netstat -atulpe | grep $dm | cut -d '/' -f1 | awk '{print $9}') }; alias kd='kill_daemon

P17 · 2009-05-26 20:39:56 7
To print a specific line from a file

I don't know if it's better but works fine :)
This is sample output - yours may be different.
-5

awk '{if (NR == 3) print}' <file>

yooreck · 2009-10-19 15:58:09 5
search for and kill a process in one blow
This is sample output - yours may be different.
-5

ps aux|grep -i [p]rocessname|awk '{ print $2 }'|xargs kill

billcarroll · 2010-04-10 18:42:27 17
How many lines does the passwd file have?
This is sample output - yours may be different.
-5

awk 'END {print NR}' /etc/passwd

Leo_Gutierrez · 2011-06-23 00:33:40 3
Print only the odd lines of a file
This is sample output - yours may be different.
-6

awk '{if (NR % 2 == 1) print $0}' file.txt

twopoint718 · 2009-02-05 18:43:19 24
Check if Fail2Ban is Running

Check if Fail2Ban is running on the system and alert it with a message in the terminal Show Sample Output
This is sample output - yours may be different.
```
[INFO] Fail2Ban is not running

or:

[INFO] Fail2Ban is running and the PID is 3557
```
-6

FAIL2BAN=`ps ax | grep fail2ban | grep -v grep | awk {'print $1'}` && if [ -n "$FAIL2BAN" ]; then printf "\n[INFO] Fail2Ban is running and the PID is %s\n\n" $FAIL2BAN; else printf "\n [INFO] Fail2Ban is not running\n\n"; fi

fmdlc · 2009-02-11 04:36:49 8
kill some pids without specific pid

search_criteria = what do you want to kill pid = pid of you dont kill
This is sample output - yours may be different.
-6

kill -9 `ps aux | grep "search_criteria" | awk '{if ($2 != pid) print $2}'`

ozgurkuru · 2010-09-16 08:52:59 6
Kill any process with one command using program name

Removed unneeded grep -v by making the initial grep unable to match itself.
This is sample output - yours may be different.
-6

ps -ef | grep [j]boss | awk '{print $2}'|xargs kill -9

utoxin · 2010-09-30 15:55:41 3
get LAN ip

get the ip address on your LAN Show Sample Output
This is sample output - yours may be different.
```
192.168.1.102
```
-6

ifconfig |grep broadcast | awk '{print $2}'

fotoflo · 2012-12-05 03:57:46 4
ps -ef | grep PROCESS | grep -v grep | awk '{system "kill -9" $2}
This is sample output - yours may be different.
-6

ps -ef | grep PROCESS | grep -v grep | awk '{system "kill -9" $2}

pepin · 2015-03-21 21:25:07 11
This is a nice way to kill processes.. the example below is for firefox!!! substitute firefox for whatever the process name is...

This is a nice way to kill processes.. the example here is for firefox!!! substitute firefox for whatever the process name is... Show Sample Output
This is sample output - yours may be different.
```
kill -9 7491 
kill -9 7506 
kill -9 7434 
kill -9 7532
```
-7

ps aux | grep -i firefox | grep -v grep | awk '{print $2}' | xargs -t -i kill -9 {}

blackdude · 2009-02-19 18:50:00 11
kill all instances of an annoying or endless, thread-spawning process
This is sample output - yours may be different.
-7

ps auxwww | grep outofcontrolprocess | awk '{print $9}' | xargs kill -9

fpater · 2009-02-20 21:49:38 6
Kill all processes matching a given name

This command kills all processes with 'SomeCommand' in the process name. There are other more elegant ways to extract the process names from ps but they are hard to remember and not portable across platforms. Use this command with caution as you could accidentally kill other matching processes! xargs is particularly handy in this case because it makes it easy to feed the process IDs to kill and it also ensures that you don't try to feed too many PIDs to kill at once and overflow the command-line buffer. Note that if you are attempting to kill many thousands of runaway processes at once you should use 'kill -9'. Otherwise the system will try to bring each process into memory before killing it and you could run out of memory. Typically when you want to kill many processes at once it is because you are already in a low memory situation so if you don't 'kill -9' you will make things worse
This is sample output - yours may be different.
-7

ps axww | grep SomeCommand | awk '{ print $1 }' | xargs kill

philiph · 2009-02-28 17:48:51 11
Pretty print output of

Show Sample Output
This is sample output - yours may be different.
```
1:
root
3410
00:00:00
gpm -m /dev/input/mice -t exps2

2:
root
3424
00:00:00
crond

3:
root
3488
00:00:00
/usr/sbin/atd
```
-8

ps -ef | awk -v OFS="\n" '{ for (i=8;i<=NF;i++) line = (line ? line FS : "") $i; print NR ":", $1, $2, $7, line, ""; line = "" }'

djangofan · 2012-12-04 15:59:53 9
send Everyone on your machine some love

This works just like write or wall ... cept one thing the sender is anonymous ... if you really want to drive everyone insane replace echo \"The Matrix has you...\" with cat /dev/urandom nice one to do on April fool's day Show Sample Output
This is sample output - yours may be different.
```
The Matrix has you... (on all writable ttys)
```
-12

w | egrep -v '(load|FROM)' | awk '{print $2}' | sed 's/^/tty/' | awk '{print "echo \"The Matrix has you...\" >> /dev/" $1}' | bash

copremesis · 2009-04-29 22:04:56 10
get LAN ip

get the ip address on your LAN Show Sample Output
This is sample output - yours may be different.
```
192.168.1.102
```
-12

ifconfig |grep broadcast | awk '{print $2}'

fotoflo · 2012-12-05 03:57:51 9
for i in $(grep 'mystring' myfile1)|awk '{print $1}'); do grep $1 myfile2;done
This is sample output - yours may be different.
-14

for i in $(grep 'mystring' myfile1)|awk '{print $1}'); do grep $1 myfile2;done

msh · 2011-03-15 16:18:29 5
‹ First < 55 56 57

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Convert CSV to JSON

Replace 'csv_file.csv' with your filename.

Add all unversioned files to svn

No need for grep, let awk do the match. This will not behave properly if the filenames contains whitespace, which is awk's default field separator.

Convert CSV to JSON

Replace 'csv_file.csv' with your filename.

merge pdf using bash brace exansion

merge pdf from pg_0001.pdf until pg_0009.pdf into MyFile.pdf

print text in color red

eg: $printTextInColorRed foo bar foo bar [in red color]

set your ssd disk as a non-rotating medium

if you still get a permissions error using sudo, then nano the file: sudo nano -w /sys/block/sdb/queue/rotational and change 1 to 0 this thread: http://www.ocztechnologyforum.com/forum/showpost.php?p=369836&postcount=15 says that this will "help the block layer to optimize a few decisions"

Monitor system load and print out top offending processes

This checks the system load every second and if it's over a certain threshold (.8 in this example), it spits out the date, system loads and top 4 processes sorted by CPU. Additionally, the \a in the first echo creates an audible bell.

bulk rename files with sed, one-liner

Far from my favorite, but works in sh and with an old sed that doesn't support '-E'

find out how much space are occuipied by files smaller than 1024K (sic) - improved

The original didn't use -print0 which fails on weird file names eg with spaces. The original parsed the output of 'ls -l' which is always a bad idea.

sshfs usage

you can use this command for mounting local directory to a remost directory..

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using awk

Commands using awk (1,418) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using awk (1,418)

sorted by