Commands using du (244)

  • Sort disk usage from directories

    Sort disk usage from directories in the current directory Show Sample Output


    2
    du --max-depth=1 -h . | sort -h
    x3mboy · 2022-08-23 14:58:57 480
  • Display total Kb/Mb/Gb of a folder and each file


    1
    du -hc *
    eluis · 2009-02-05 17:04:21 18
  • List all files/folders in working directory with their total size in Megabytes


    1
    du --max-depth=1 -m
    bseaver · 2009-02-16 15:48:12 246
  • Get the size of all the directories in current directory


    1
    sudo du -sh $(ls -d */) 2> /dev/null
    Code_Bleu · 2009-08-07 19:00:09 4
  • Ultimate current directory usage command

    A little bit smaller, faster and should handle files with special characters in the name.


    1
    find . -maxdepth 1 ! -name '.' -execdir du -0 -s {} + | sort -znr | gawk 'BEGIN{ORS=RS="\0";} {sub($1 "\t", ""); print $0;}' | xargs -0 du -hs
    ashawley · 2009-09-11 16:07:39 7
  • Monitor a file's size


    1
    watch -n 60 du /var/log/messages
    rbossy · 2009-10-27 14:53:41 3
  • List the biggest accessible files/dirs in current directory, sorted


    1
    du -ms * 2>/dev/null |sort -nr|head
    yooreck · 2009-11-23 16:06:40 3
  • find large files

    simple find -> xargs sort of thing that I get a lot of use out of. Helps find huge files and gives an example of how to use xargs to deal with them. Tested on OSX snow leopard (10.6). Enjoy. Show Sample Output


    1
    find . -type f -size +1100000k |xargs -I% du -sh %
    4fthawaiian · 2010-01-31 22:04:07 8
  • tar directory and compress it with showing progress and Disk IO limits

    tar directory and compress it with showing progress and Disk IO limits. Pipe Viewer can be used to view the progress of the task, Besides, he can limit the disk IO, especially useful for running Servers. Show Sample Output


    1
    tar pcf - home | pv -s $(du -sb home | awk '{print $1}') --rate-limit 500k | gzip > /mnt/c/home.tar.gz
    Sail · 2010-04-02 15:29:03 6
  • calculate the total size of files in specified directory (in Megabytes)


    1
    du -sm $dirname
    unixmonkey10174 · 2010-06-04 10:00:16 8
  • list folders containing less than 2 MB of data

    This command will search all subfolders of the current directory and list the names of the folders which contain less than 2 MB of data. I use it to clean up my mp3 archive and to delete the found folders pipe the output to a textfile & run: while read -r line; do rm -Rv "$line"; done < textfile


    1
    find . -type d -exec du -sk '{}' \; | awk '{ if ($1 <2000) print $0 }' | sed 's/^[0-9]*.//'
    mtron · 2010-06-16 09:37:56 3
  • continuously check size of files or directories

    very handy if you copy or download a/some file(s) and want to know how big it is at the moment


    1
    while true; do du -s <file_or_directory>; sleep <time_interval>; done
    potatoface · 2010-08-24 19:55:13 3
  • Display the size of all your home's directories

    Display the size (human reading) of all the directories in your home path (~). Show Sample Output


    1
    du -sh ~/*
    unixmonkey13748 · 2010-11-05 10:20:16 6
  • FInd the 10 biggest files taking up disk space

    Often you need to find the files that are taking up the most disk space in order to free up space asap. This script can be run on the enitre filesystem as root or on a home directory to find the largest files. Show Sample Output


    1
    find / -type f 2>/dev/null | xargs du 2>/dev/null | sort -n | tail -n 10 | cut -f 2 | xargs -n 1 du -h
    mxc · 2010-11-09 13:45:11 6
  • find all file larger than 500M

    Greater than 500M and sorted by size.


    1
    find . -type f -size +500M -exec du {} \; | sort -n
    PhillipNordwall · 2010-11-09 18:15:44 3
  • FInd the 10 biggest files taking up disk space


    1
    find / -type f -size +100M -exec du {} \; | sort -n | tail -10 | cut -f 2
    PhillipNordwall · 2010-11-09 18:34:49 3
  • FInd the 10 biggest files taking up disk space

    This combines the above two command into one. Note that you can leave off the last two commands and simply run the command as "find /home/ -type f -exec du {} \; 2>/dev/null | sort -n | tail -n 10" The last two commands above just convert the output into human readable format.


    1
    find /home/ -type f -exec du {} \; 2>/dev/null | sort -n | tail -n 10 | xargs -n 1 du -h 2>/dev/null
    mxc · 2010-11-10 07:24:17 3
  • List 10 largest directories in current directory

    du -m option to not go across mounts (you usually want to run that command to find what to destroy in that partition) -a option to also list . files -k to display in kilobytes sort -n to sort in numerical order, biggest files last tail -10 to only display biggest 10


    1
    du . -mak|sort -n|tail -10
    georgesdev · 2010-12-03 19:28:55 2
  • Find the biggest files

    Show the top 10 file size


    1
    find -type f | xargs -I{} du -sk "{}" | sort -rn | head
    glaudiston · 2011-01-04 11:10:02 3
  • simple du command to give size of next level of subfolder in MB

    If you're only using -m or -k, you will need to remember they are either in Megabyte or kilobyte forms. So by using -B, it gives you the unit of the size measurement, which helps you from reading the result faster. You can try with -B K as well. Show Sample Output


    1
    du --max-depth=1 -B M |sort -rn
    unixmonkey20397 · 2011-04-12 15:01:12 7
  • Get the size of all the directories in current directory (Sorted Human Readable)

    as per eightmillion's comment. Simply economical :)


    1
    du -h | sort -hr
    mooselimb · 2011-11-06 23:15:36 3
  • Show total size of each subdirectory, broken down by KB,MB,GB,TB


    1
    du --max-depth=1 | sort -nr | awk ' BEGIN { split("KB,MB,GB,TB", Units, ","); } { u = 1; while ($1 >= 1024) { $1 = $1 / 1024; u += 1 } $1 = sprintf("%.1f %s", $1, Units[u]); print $0; } '
    threv · 2011-12-08 17:43:09 4
  • One line Perl Script to determine the largest file sizes on a Linux Server

    This one line Perl script will display the smallest to the largest files sizes in all directories on a server. Show Sample Output


    1
    du -k | sort -n | perl -ne 'if ( /^(\d+)\s+(.*$)/){$l=log($1+.1);$m=int($l/log(1024)); printf ("%6.1f\t%s\t%25s %s\n",($1/(2**(10*$m))),(("K","M","G","T","P")[$m]),"*"x (1.5*$l),$2);}' | more
    Q_Element · 2012-02-07 15:49:19 10
  • Recursively find top 20 largest files (> 1MB) sort human readable format

    from my bashrc ;)


    1
    find . -mount -type f -printf "%k %p\n" | sort -rg | cut -d \ -f 2- | xargs -I {} du -sh {} | less
    bashrc · 2012-03-30 07:37:52 3
  • du and sort to find the biggest directories in defined filesystem

    This command give a human readable result without messing up the sorting.


    1
    for i in G M K; do du -hx /var/ | grep [0-9]$i | sort -nr -k 1; done | less
    jlaunay · 2012-06-26 22:57:17 6
  • ‹ First  < 2 3 4 5 6 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Clean up display when the bash prompt is displayed
This will cause bash to fix a garbled terminal before the prompt is printed. For example, if you cat a file with nonprintable character sequences, the terminal sometimes ends up in a mode where it only prints line drawing characters. This sequence will return the terminal to the standard character set after every command.

list block devices
Shows all block devices in a tree with descruptions of what they are.

find only current directory (universal)
you must be in the directory to analyse report all files and links in the currect directory, not recursively. this find command ahs been tested on hp-ux/linux/aix/solaris.

Quickly add a new user to all groups the default user is in
This is a standard procedure for me, whenever I set up a new Raspberry Pi system. Because the default user is "pi", I quickly replace it with my own (e.g. "kostis"), but I have to substitute that user to all of pi's groups first, before deleting the default account. xargs helps a lot with that in a single line, while avoiding boring "for" loops. For everything trickier, there's always "parallel" :)

Don't like the cut command? Tired of typing awk '{print $xxx}', try this

Using mplayer to play the audio only but suppress the video
Sometimes you only want to linsten the audio while output the video will be a waste of CPU resource and an annoying window. With option -vo null, you will enjoy the audio!

Remove all HTML tags from a file
A shorter version of command #3014, using awk instead of sed. Useful when scraping websites with a script.

Create a mirror of a local folder, on a remote server
Create a exact mirror of the local folder "/root/files", on remote server 'remote_server' using SSH command (listening on port 22) (all files & folders on destination server/folder will be deleted)

Find installed network devices
Find installed network devices.

which program is this port belongs to ?
Sometimes you need to use a port that is already opened by some program , and you don't know who to "kill" for it to release - so, now you do !

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: