Commands using head sorted by votes

Commands using head (314)

sorted by

Find top 5 big files

Find top 5 big files
This is sample output - yours may be different.
-3

find . -type f -exec ls -s {} \; | sort -n -r | head -5

opexxx · 2013-03-19 12:16:24 5
Pick a random line from a file

prints a random line
This is sample output - yours may be different.
-4

head -$(($RANDOM % $(wc -l < file.txt) +1 )) file.txt | tail -1

sharfah · 2009-07-23 12:00:49 3
Pick a random line from a file
This is sample output - yours may be different.
-4

shuf file.txt | head -n 1

lxtips · 2009-07-24 04:22:10 4
Get Futurama quotations from slashdot.org servers
This is sample output - yours may be different.
-4

echo -e "HEAD / HTTP/1.1\nHost: slashdot.org\n\n" | nc slashdot.org 80 | head -n5 | tail -1 | cut -f2 -d-

beerbrain · 2009-07-31 06:49:52 3
find out public ip address by using any host that have 'efingerd -n'

This is useful when you got a reserved IP address like 192.168.0.100 and want to find out what IP address is used to access the Internet. You have to know a server with 'efingerd -n' configured, like www.linuxbanks.cn as above. Other method to find out this information are for example access www.tell-my-ip.com and grep the output. The finger method have the advantage that it is easy to deploy a service like www.tell-my-ip.com, as you only need to get efingerd installed.
This is sample output - yours may be different.
-4

finger @www.linuxbanks.cn | grep -oE '([[:digit:]]{1,3}\.){3}[[:digit:]]{1,3}' | head -n1

zhangweiwu · 2010-05-05 14:58:55 5
Blue Matrix

Matrix Screen HPUX
This is sample output - yours may be different.
-4

while :; do integer i=0; COL=$((RANDOM%$(tput cols))); ROW=$((RANDOM%$(tput cols))); while (( i <= COL)) do tput cup $i $ROW; echo "\033[1;34m" $(cat /dev/urandom | head -1 | cut -c1-1) 2>/dev/null; i=$(expr $i + 1); done done

mfrancime · 2010-05-28 11:17:43 3
Get the IP address

Get the first IPv4 address of an interface Show Sample Output
This is sample output - yours may be different.
```
192.168.253.52
```
-4

ip a s eth0 | grep "inet " | head -n 1 | awk '{print $2}' | cut -f1 -d'/'

thelan · 2012-07-16 07:54:43 3
Print just line 4 from a textfile
This is sample output - yours may be different.
-5

tail -n +4 | head -n 1

unixmonkey10745 · 2010-07-09 12:10:03 28
Go to the Nth line of file

Silly approach, but easy to remember... Show Sample Output
This is sample output - yours may be different.
```
tcpmux		1/tcp				# TCP port service multiplexer
```
-5

head -n 13 /etc/services | tail -n 1

muonIT · 2011-09-15 19:39:49 13
To print a specific line from a file

Tail is much faster than sed, awk because it doesn't check for regular expressions. Show Sample Output
This is sample output - yours may be different.
```
$ tail -n +5 /var/log/dmesg | head -n 1
[    0.000000] KERNEL supported cpus:
```
-5

tail -n +<N> <file> | head -n 1

qweqq · 2011-09-30 08:30:30 6
Print all the lines between 10 and 20 of a file
This is sample output - yours may be different.
-6

head -n 20 <filename> | tail

jamolkhon · 2010-11-15 13:08:12 4
Speak the last 3 tweets on Mac OS

You need curl.. and a Mac of course.
This is sample output - yours may be different.
-7

curl -s -u user:password http://twitter.com/statuses/friends_timeline.rss | grep title | sed -ne 's/<\/*title>//gp' | head -n 4 | say -v Bruce

sixtus · 2009-03-20 20:14:13 5
Print just line 4 from a textfile

tail -n X | head -n 1 prints a specific line, where X is the line number
This is sample output - yours may be different.
-7

tail -n 4 | head -n 1

puddy · 2010-07-08 19:50:06 4
Install and run when a command is not found

Work only with bash and apt-file installed. When it found an unknow command, it will search for a file named "scribus" (in my example), in a folder named bin and then install the corresponding package. After installation, it will run the command. Usefull juste after reinstalling linux and missing lot of package. Show Sample Output
This is sample output - yours may be different.
```
juluan@juluan-desktop ~ 21:56:04 [130] $ scribus
Lecture des listes de paquets... Fait
Construction de l'arbre des d?pendances       
Lecture des informations d'?tat... Fait
Les paquets suppl?mentaires suivants seront install?s?: 
  blt python-tk
Paquets sugg?r?s?:
  blt-demo tix python-tk-dbg scribus-template scribus-doc
Les NOUVEAUX paquets suivants seront install?s?:
  blt python-tk scribus
0 mis ? jour, 3 nouvellement install?s, 0 ? enlever et 3 non mis ? jour.
Il est n?cessaire de prendre 11,5Mo dans les archives.
Apr?s cette op?ration, 32,2Mo d'espace disque suppl?mentaires seront utilis?s.
Souhaitez-vous continuer [O/n]??
```
-7

function command_not_found_handle(){ apt-get install $( apt-file search "$1" | grep bin | grep -w "$1" | head -n1 | cut -d ':' -f 1 ) && $* ; }

Juluan · 2011-04-06 19:58:32 8
‹ First < 11 12 13

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Detect illegal access to kernel space, potentially useful for Meltdown detection

Based on capsule8 agent examples, not rigorously tested

Matrix Style

I like the fact the Patola's version uses only ones and zeros, but I also like the sparse output of the other versions. This one combines both of those features and eliminates some unnecessary cruft. You can vary the sparseness by changing "$(($RANDOM % 5))" to another number. The number in this term "$(($RANDOM % 4))" controls how frequently the numbers are output bold.

Selecting a random file/folder of a folder

Also looks in subfolders

Convert JSON to YAML (unicode safe)

If you tried the other Python version of Convert JSON to YAML and you end up with lines that has "!!python/unicode", this version of the command is for you.

Convert spaces in file names to underscores

Convert ascii string to hex

Here's a version that uses perl. If you'd like a trailing newline: $ perl -pe 's/(.)/sprintf("\\x%x", ord($1))/eg; END {print "\n"}'

List symbols from a dynamic library (.so file)

You can get what functions at which addresses are inside a dynamic link library by this tool.

Ruby - nslookup against a list of IP`s or FQDN`s

This version uses host and no ruby.

Synchronize date and time with a server over ssh

using -u is better for standardizing date output and timezones, for servers in different timezones.

Get your external IP address ( 10 characters long )

Shortest url to a external IP-service, 10 characters.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using head

Commands using head (314) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using head (314)

sorted by