Commands using head sorted by votes

Commands using head (314)

sorted by

Find top 5 big files

Find top 5 big files
This is sample output - yours may be different.
-3

find . -type f -exec ls -s {} \; | sort -n -r | head -5

opexxx · 2013-03-19 12:16:24 5
Pick a random line from a file

prints a random line
This is sample output - yours may be different.
-4

head -$(($RANDOM % $(wc -l < file.txt) +1 )) file.txt | tail -1

sharfah · 2009-07-23 12:00:49 3
Pick a random line from a file
This is sample output - yours may be different.
-4

shuf file.txt | head -n 1

lxtips · 2009-07-24 04:22:10 4
Get Futurama quotations from slashdot.org servers
This is sample output - yours may be different.
-4

echo -e "HEAD / HTTP/1.1\nHost: slashdot.org\n\n" | nc slashdot.org 80 | head -n5 | tail -1 | cut -f2 -d-

beerbrain · 2009-07-31 06:49:52 3
find out public ip address by using any host that have 'efingerd -n'

This is useful when you got a reserved IP address like 192.168.0.100 and want to find out what IP address is used to access the Internet. You have to know a server with 'efingerd -n' configured, like www.linuxbanks.cn as above. Other method to find out this information are for example access www.tell-my-ip.com and grep the output. The finger method have the advantage that it is easy to deploy a service like www.tell-my-ip.com, as you only need to get efingerd installed.
This is sample output - yours may be different.
-4

finger @www.linuxbanks.cn | grep -oE '([[:digit:]]{1,3}\.){3}[[:digit:]]{1,3}' | head -n1

zhangweiwu · 2010-05-05 14:58:55 5
Blue Matrix

Matrix Screen HPUX
This is sample output - yours may be different.
-4

while :; do integer i=0; COL=$((RANDOM%$(tput cols))); ROW=$((RANDOM%$(tput cols))); while (( i <= COL)) do tput cup $i $ROW; echo "\033[1;34m" $(cat /dev/urandom | head -1 | cut -c1-1) 2>/dev/null; i=$(expr $i + 1); done done

mfrancime · 2010-05-28 11:17:43 3
Get the IP address

Get the first IPv4 address of an interface Show Sample Output
This is sample output - yours may be different.
```
192.168.253.52
```
-4

ip a s eth0 | grep "inet " | head -n 1 | awk '{print $2}' | cut -f1 -d'/'

thelan · 2012-07-16 07:54:43 3
Print just line 4 from a textfile
This is sample output - yours may be different.
-5

tail -n +4 | head -n 1

unixmonkey10745 · 2010-07-09 12:10:03 27
Go to the Nth line of file

Silly approach, but easy to remember... Show Sample Output
This is sample output - yours may be different.
```
tcpmux		1/tcp				# TCP port service multiplexer
```
-5

head -n 13 /etc/services | tail -n 1

muonIT · 2011-09-15 19:39:49 13
To print a specific line from a file

Tail is much faster than sed, awk because it doesn't check for regular expressions. Show Sample Output
This is sample output - yours may be different.
```
$ tail -n +5 /var/log/dmesg | head -n 1
[    0.000000] KERNEL supported cpus:
```
-5

tail -n +<N> <file> | head -n 1

qweqq · 2011-09-30 08:30:30 6
Print all the lines between 10 and 20 of a file
This is sample output - yours may be different.
-6

head -n 20 <filename> | tail

jamolkhon · 2010-11-15 13:08:12 4
Speak the last 3 tweets on Mac OS

You need curl.. and a Mac of course.
This is sample output - yours may be different.
-7

curl -s -u user:password http://twitter.com/statuses/friends_timeline.rss | grep title | sed -ne 's/<\/*title>//gp' | head -n 4 | say -v Bruce

sixtus · 2009-03-20 20:14:13 5
Print just line 4 from a textfile

tail -n X | head -n 1 prints a specific line, where X is the line number
This is sample output - yours may be different.
-7

tail -n 4 | head -n 1

puddy · 2010-07-08 19:50:06 3
Install and run when a command is not found

Work only with bash and apt-file installed. When it found an unknow command, it will search for a file named "scribus" (in my example), in a folder named bin and then install the corresponding package. After installation, it will run the command. Usefull juste after reinstalling linux and missing lot of package. Show Sample Output
This is sample output - yours may be different.
```
juluan@juluan-desktop ~ 21:56:04 [130] $ scribus
Lecture des listes de paquets... Fait
Construction de l'arbre des d?pendances       
Lecture des informations d'?tat... Fait
Les paquets suppl?mentaires suivants seront install?s?: 
  blt python-tk
Paquets sugg?r?s?:
  blt-demo tix python-tk-dbg scribus-template scribus-doc
Les NOUVEAUX paquets suivants seront install?s?:
  blt python-tk scribus
0 mis ? jour, 3 nouvellement install?s, 0 ? enlever et 3 non mis ? jour.
Il est n?cessaire de prendre 11,5Mo dans les archives.
Apr?s cette op?ration, 32,2Mo d'espace disque suppl?mentaires seront utilis?s.
Souhaitez-vous continuer [O/n]??
```
-7

function command_not_found_handle(){ apt-get install $( apt-file search "$1" | grep bin | grep -w "$1" | head -n1 | cut -d ':' -f 1 ) && $* ; }

Juluan · 2011-04-06 19:58:32 8
‹ First < 11 12 13

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Determine if photos have been rotated to portrait orientation instead of normal landscape orientation

Most people take photos in landscape orientation (wider than it is tall). Sometimes though you turn the camera sideways to capture a narrow/tall subject. Assuming you then manually rotate those picture files 90 degrees for proper viewing on screen or photo frame, you now have a mix of orientations in your photos directory. This command will print out the names of all the photos in the current directory whose vertical resolution is larger than its horizontal resolution (i.e. portrait orientation). You can then take that list of files and deal with them however you need to, like re-rotating back to landscape for consistent printing with all the others. This command requires the "identify" command from the ImageMagick command-line image manipulation suite. Sample output from identify: $ identify PICT2821.JPG PICT2821.JPG JPEG 1536x2048 1536x2048+0+0 8-bit DirectClass 688KB 0.016u 0:00.006

Quick find function

A function that allows you to perform a case-insensitive search in the current directory, and directories in the current directory (but no further), for files containing the first argument anywhere in their names.

list files recursively by size

List files older than one year, exluding those in the .snapshot directory

Useful when you want to cron a daily deletion task in order to keep files not older than one year. The command excludes .snapshot directory to prevent backup deletion. One can append -delete to this command to delete the files : $ find /path/to/directory -not $ -name .snapshot -prune $ -type f -mtime +365 -delete

Vectorize xkcd strips

Uses ImageMagick and potrace to vectorize the input image, with parameters optimized for xkcd-like pictures.

finds the c files with lines containing 'mcs', in the folders under the current folder

Copy a file using dd and watch its progress

This is a more accurate way to watch the progress of a dd process. The $DDPID=$! is needed so that you don't get the PID of the sleep. The sleep 1 is needed because in my testing at least, if you run kill -USR1 against dd too quickly, it will kill it off instead of display the status. So you need to wait a second, probably so that it can configure itself to trap the USR1 signal.

Create an animated gif from a Youtube video

requires "youtube-dl" -- sure you can do this with wget and some more obscurity but why waste your time when this great tool is available? the guts consist of mplayer converting a video to a gif -- study this command and read the man page for more information $ mplayer video.flv -ss 00:23 -endpos 6 -vo gif89a:fps=5:output=output.gif -vf scale=400:300 -nosound generates a 6 second gif starting at 23 seconds of play time at 5 fps and a scale of 400x300 start time (-ss)/end time (-endpos) formats: 00:00:00.000 end time should be relative to start time, not absolute. i.e. -endpos 5 == seconds after 0:42 = 0:47 end point play with fps and scale for lower gif sizes the subshell is a solution for the -b flag on youtube-dl which downloads the best quality video, sometimes, which can be various video formats $(ls ${url##*=}*| tail -n1)

Stop long commands wrapping around and over-writing itself in the Bash shell

add the command either in /etc/profile or ~/.bash_profile so that this is available to your shell.

List the binaries installed by a Debian package

GNU grep's perl-compatible regular expression(PCRE).

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using head

Commands using head (314) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using head (314)

sorted by