Commands using ssh sorted by votes

Commands using ssh (347)

sorted by

send a file or directory via ssh compressing with lzma for low trafic
This is sample output - yours may be different.
2

tar -cf - ./file | lzma -c | ssh user@sshserver $(cd /tmp; tar --lzma -xf -)

glaudiston · 2010-08-13 21:52:17 4
Copy from host 1 to host 2 through your host
This is sample output - yours may be different.
2

ssh root@host1 ?cd /somedir/tocopy/ && tar -cf ? .? | ssh root@host2 ?cd /samedir/tocopyto/ && tar -xf -?

Matejunkie · 2010-11-27 00:15:57 4
remove hostname from known_hosts
This is sample output - yours may be different.
2

ssh-keygen -R hostname

harleywastaken · 2011-02-01 18:26:11 7
HTTP GET request on wireshark remotly
This is sample output - yours may be different.
2

ssh USER@HOST "sudo tshark -i eth0 -f 'tcp port 80 and tcp[((tcp[12:1] & 0xf0) >> 2):4] = 0x47455420' -w -" | wireshark -k -i -

bitbasher · 2011-06-16 10:36:32 4
Remove invalid key from the known_hosts file for the IP address of a host

Quick shortcut if you know the hostname and want to save yourself one step for looking up the IP address separately.
This is sample output - yours may be different.
2

ssh-keygen -R $(dig +short host.domain.tld)

atoponce · 2012-01-19 15:08:50 3
Live stream a remote desktop over ssh using only ffmpeg

Play with the framerate option '-r' to scale back bandwidth usage. The '-s' option is the captured screan area, not the rescaled size. If you want to rescale add a second '-s' option after '-i :0'. Rescaling smaller will also decrease bandwidth.
This is sample output - yours may be different.
2

ssh user@host "ffmpeg -f x11grab -r 5 -s 1280x720 -i :0 -f avi -" | ffplay - &>/dev/null

buhrietoe · 2012-05-01 06:26:49 5
Copy ssh keys to user@host to enable password-less ssh logins.

Alternative for machines without ssh-copy-id
This is sample output - yours may be different.
2

cat ~/.ssh/id_rsa.pub | ssh user@host 'cat >> ~/.ssh/authorized_keys'

eneko · 2012-12-08 17:00:47 15
Oneliner to run commands on multiple servers

Oneliner to run commands on multiple servers over ssh. - First parameter "$1" is the command you want to execute remotely. ( It can be multiple commands e.g. "hostname;uptime") - Second parameter "${@:2}" represents the remote host/s you want to run the command/s on. Show Sample Output
This is sample output - yours may be different.
```
$ sxh "hostname;uptime" Host1 Host2
Host1
 11:25am  up 7 days,  4:42,  0 users,  load average: 0.09, 0.08, 0.05
Host2
 11:25am  up 7 days,  4:34,  1 user,  load average: 0.00, 0.00, 0.01
```
2

sxh () { for i in "${@:2}"; do ssh "$i" "$1"; done ; }

zlemini · 2013-04-12 11:34:02 8
Get and read log from remote host (works with log on pipe, too)
This is sample output - yours may be different.
2

ssh remoteUser@remoteHost "tail -f /var/log/scs/remoteLogName" | tee localLogName

scanepa · 2013-09-29 20:32:51 7
Automatically tunnel all ports of running docker instances in boot2docker

It requires https://jqplay.org/, that comes with brew: brew install jq Show Sample Output
This is sample output - yours may be different.
```
none :)
```
2

docker ps -q | xargs -n 1 docker inspect | jq '.[0].NetworkSettings.Ports +{} | map(select(. != null)[0].HostPort) | map("-L $.):localhost:\(.)") ' | sed -n 's/.*"\(.*$".*/\1/p' |xargs boot2docker ssh -N

keymon · 2014-07-27 23:30:31 4
oneliner to transfer a directory using ssh and tar

this will tar/send/untrar a whole directory.
This is sample output - yours may be different.
2

tar cvzf - dir | ssh my_server 'tar xzf -'

snaguber · 2014-07-31 18:14:16 9
Backup VPS disk to another host
This is sample output - yours may be different.
2

ssh root@vps.example -p22 "cat /dev/sda1 | gzip -1 - " > vps.sda1.img.gz

tianyu · 2019-04-21 05:25:00 36
Rsync using SSH and outputing results to a text file

--delete will delete copies on remote to match local if deleted on local --stats will output the results -z zip -a archive -A preserve ACL -x don't cross filesystem boundaries -h human readable -e specify the remote shell to use
This is sample output - yours may be different.
2

rsync --delete --stats -zaAxh -e ssh /local_directory/ username@IP_of_remote:/Remote_Directory/ > /Text_file_Directory/backuplog.txt

chicagonpg · 2019-09-10 21:00:29 90
SSH to a machine's internet address if it is not present on your local network

Ping machine once, waiting 1 second for response until failing. Upon fail, ssh globally, otherwise ssh locally.
This is sample output - yours may be different.
1

ping localip -c 1 -W 1 &> /dev/null && ssh localip || ssh globalip

trey · 2009-02-05 10:40:26 524
Validate openssh key & print checksum
This is sample output - yours may be different.
1

ssh-keygen -l -f [pubkey] | awk '{print $2}' | tr -ds ':' '' | egrep -ie "[a-f0-9]{32}"

wwest4 · 2009-02-05 17:42:30 16
Adhoc tar backup

Creates a quick backup with tar to a remote host over ssh.
This is sample output - yours may be different.
1

tar -cvzf - /source/path | ssh <targethostname> -l <username> dd of=/destination/path/backupfile.tgz

smm · 2009-02-06 15:52:09 12
run command on a group of nodes in parallel
This is sample output - yours may be different.
1

echo -n m{1..5}.cluster.net | xargs -d' ' -n1 -P5 -I{} ssh {} 'uptime'

jianingy · 2009-02-08 12:34:04 15
tunnel vnc port

Foward vnc securely from exampleserver.com Show Sample Output
This is sample output - yours may be different.
```
user@exampleserver.com's password:
```
1

ssh -L 5900:localhost:5900 user@exampleserver.com

Jackie · 2009-02-13 04:53:27 9
Connect to remote machine with other enconding charset
This is sample output - yours may be different.
1

LC_ALL=fr_FR luit ssh root@remote_machine_ip

irraz · 2009-03-03 22:42:37 5
Copy files and directories from a remote machine to the local machine

This command will copy files and directories from a remote machine to the local one. Ensure you are in the local directory you want to populate with the remote files before running the command. To copy a directory and it's contents, you could: ssh user@host "(cd /path/to/a/directory ; tar cvf - ./targetdir)" | tar xvf - This is especially useful on *nix'es that don't have 'scp' installed by default.
This is sample output - yours may be different.
1

ssh user@host "(cd /path/to/remote/top/dir ; tar cvf - ./*)" | tar xvf -

dopeman · 2009-03-31 13:08:45 9
Backup with SSH in a archive

PRIVATEKEY - Of course the full path to the private key \n HOST - The host where to get the backup \n SOURCE - The directory you wish to backup \n DESTINATION - The destination for the backup on your local machine
This is sample output - yours may be different.
1

ssh -i $PRIVATEKEY $HOST -C 'cd $SOURCE; tar -cz --numeric-owner .' | tee $DESTINATION/backup.tgz | tar -tz

GeckoDH · 2009-05-18 20:36:45 4
clone a hard drive to a remote directory via ssh tunnel, and compressing the image
This is sample output - yours may be different.
1

# dd if=/dev/sda | gzip -c | ssh user@ip 'dd of=/mnt/backups/sda.dd'

coolman · 2009-07-06 19:05:55 7
Pull up remote desktop for other than gnome/kde eg fluxbox

If the remote doesn't export its desktop (eg fluxbox, blackbox etc) then you need to run a x11vnc server there and a vncviewer at the local end. This command does the lot for you - it assumes that you can 'ssh' to the box without a password and that x11vnc is installed at the remote end.
This is sample output - yours may be different.
1

rdp() { ssh $1 sh -c 'PATH=$PATH:/usr/local/bin; x11vnc -q -rfbauth ~/.vnc/passwd -display :0' & sleep 4; vncviewer $1:0 & }

bhepple · 2009-11-25 07:21:02 3
test moduli file generated for openssh

this command test the moduli file generated by the command ssh-keygen -G /tmp/moduli-2048.candidates -b 2048 . The test can be long depend of your cpu power , around 5 minutes to 30 minutes
This is sample output - yours may be different.
1

ssh-keygen -T moduli-2048 -f /tmp/moduli-2048.candidates

eastwind · 2010-01-29 19:35:21 3
Skip banner on ssh login prompt

This allows you to skip the banner (usually /etc/issue.net) on ssh connections. Useful to avoid banners outputted to your mail by rsync cronjobs.
This is sample output - yours may be different.
1

ssh -q user@server

KoRoVaMiLK · 2010-03-24 12:02:55 4
‹ First < 5 6 7 8 9 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Put uppercase letters in curly brackets in a BibTeX database

It is often recommended to enclose capital letters in a BibTeX file in braces, so the letters will not be transformed to lower case, when imported from LaTeX. This is an attempt to apply this rule to a BibTeX database file. DO NOT USE sed '...' input.bib > input.bib as it will empty the file! How it works: $ /^\s*[^@%]/ Apply the search-and-replace rule to lines that start (^) with zero or more white spaces (\s*), followed by any character ([...]) that is *NOT* a "@" or a "%" (^@%). $ s===g Search (s) for some stuff and replace by other stuff. Do that globally (g) for all matches in each processed line. $ $[A-Z][A-Z]*$$[^}A-Z]\|},$$ Matches at least one uppercase letter ([A-Z][A-Z]*) followed by a character that is EITHER not "}" and not a capital letter ([^}A-Z]) OR (|) it actually IS a "}", which is followed by "," at the end of the line ($). Putting regular expressions in escaped parentheses ($ and $, respectively) allows to dereference the matched string later. $ {\1}\2 Replace the matched string by "{", followed by part 1 of the matched string (\1), followed by "}", followed by the second part of the matched string (\2). I tried this with GNU sed, only, version 4.2.1.

Capture screen and mic input using FFmpeg and ALSA

Yet another x11grab using ffmpeg. I also added mic input to the capturing video stream using alsa. Yet I need to find out how to capture audio which is currently playing.

Add forgotten changes to the last git commit

It's pretty common to forgot to commit a files, be it a modification, or a brand new file. If you did forget something, git add the files you want, and then git commit --amend. It will essentially redo the last commit, with the changes you just added. It seeds the commit message with the last commit message by default. You probably shouldn't do this if you've already pushed the commit.

Spoof your wireless MAC address on OS X to 00:e2:e3:e4:e5:e6

If you want to check that the spoof worked, type the same command as earlier: $ifconfig en1 | grep ether Now you will see: $ether 00:e2:e3:e4:e5:e6 For the wired ethernet port: $sudo ifconfig en0 ether 00:e2:e3:e4:e5:e6

Simplest way to get size (in bytes) of a file

batch convert Nikon RAW (nef) images to JPG

converts RAW files from a Nikon DSLR to jpg for easy viewing etc. requires ufraw package

Recursive Line Count

find files beginning with filename* that do not include "string"

Inverse grep, to find files without the string

concatenate compressed and uncompressed logs

I use zgrep because it also parses non gzip files. With ls -tr, we parse logs in time order. Greping the empty string just concatenates all logs, but you can also grep an IP, an URL...

Show total size of each subdirectory, broken down by KB,MB,GB,TB

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using ssh

Commands using ssh (347) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using ssh (347)

sorted by