Commands using ssh sorted by votes

Commands using ssh (347)

sorted by

send a file or directory via ssh compressing with lzma for low trafic
This is sample output - yours may be different.
2

tar -cf - ./file | lzma -c | ssh user@sshserver $(cd /tmp; tar --lzma -xf -)

glaudiston · 2010-08-13 21:52:17 4
Copy from host 1 to host 2 through your host
This is sample output - yours may be different.
2

ssh root@host1 ?cd /somedir/tocopy/ && tar -cf ? .? | ssh root@host2 ?cd /samedir/tocopyto/ && tar -xf -?

Matejunkie · 2010-11-27 00:15:57 4
remove hostname from known_hosts
This is sample output - yours may be different.
2

ssh-keygen -R hostname

harleywastaken · 2011-02-01 18:26:11 7
HTTP GET request on wireshark remotly
This is sample output - yours may be different.
2

ssh USER@HOST "sudo tshark -i eth0 -f 'tcp port 80 and tcp[((tcp[12:1] & 0xf0) >> 2):4] = 0x47455420' -w -" | wireshark -k -i -

bitbasher · 2011-06-16 10:36:32 4
Remove invalid key from the known_hosts file for the IP address of a host

Quick shortcut if you know the hostname and want to save yourself one step for looking up the IP address separately.
This is sample output - yours may be different.
2

ssh-keygen -R $(dig +short host.domain.tld)

atoponce · 2012-01-19 15:08:50 3
Live stream a remote desktop over ssh using only ffmpeg

Play with the framerate option '-r' to scale back bandwidth usage. The '-s' option is the captured screan area, not the rescaled size. If you want to rescale add a second '-s' option after '-i :0'. Rescaling smaller will also decrease bandwidth.
This is sample output - yours may be different.
2

ssh user@host "ffmpeg -f x11grab -r 5 -s 1280x720 -i :0 -f avi -" | ffplay - &>/dev/null

buhrietoe · 2012-05-01 06:26:49 5
Copy ssh keys to user@host to enable password-less ssh logins.

Alternative for machines without ssh-copy-id
This is sample output - yours may be different.
2

cat ~/.ssh/id_rsa.pub | ssh user@host 'cat >> ~/.ssh/authorized_keys'

eneko · 2012-12-08 17:00:47 15
Oneliner to run commands on multiple servers

Oneliner to run commands on multiple servers over ssh. - First parameter "$1" is the command you want to execute remotely. ( It can be multiple commands e.g. "hostname;uptime") - Second parameter "${@:2}" represents the remote host/s you want to run the command/s on. Show Sample Output
This is sample output - yours may be different.
```
$ sxh "hostname;uptime" Host1 Host2
Host1
 11:25am  up 7 days,  4:42,  0 users,  load average: 0.09, 0.08, 0.05
Host2
 11:25am  up 7 days,  4:34,  1 user,  load average: 0.00, 0.00, 0.01
```
2

sxh () { for i in "${@:2}"; do ssh "$i" "$1"; done ; }

zlemini · 2013-04-12 11:34:02 8
Get and read log from remote host (works with log on pipe, too)
This is sample output - yours may be different.
2

ssh remoteUser@remoteHost "tail -f /var/log/scs/remoteLogName" | tee localLogName

scanepa · 2013-09-29 20:32:51 7
Automatically tunnel all ports of running docker instances in boot2docker

It requires https://jqplay.org/, that comes with brew: brew install jq Show Sample Output
This is sample output - yours may be different.
```
none :)
```
2

docker ps -q | xargs -n 1 docker inspect | jq '.[0].NetworkSettings.Ports +{} | map(select(. != null)[0].HostPort) | map("-L $.):localhost:\(.)") ' | sed -n 's/.*"\(.*$".*/\1/p' |xargs boot2docker ssh -N

keymon · 2014-07-27 23:30:31 4
oneliner to transfer a directory using ssh and tar

this will tar/send/untrar a whole directory.
This is sample output - yours may be different.
2

tar cvzf - dir | ssh my_server 'tar xzf -'

snaguber · 2014-07-31 18:14:16 9
Backup VPS disk to another host
This is sample output - yours may be different.
2

ssh root@vps.example -p22 "cat /dev/sda1 | gzip -1 - " > vps.sda1.img.gz

tianyu · 2019-04-21 05:25:00 36
Rsync using SSH and outputing results to a text file

--delete will delete copies on remote to match local if deleted on local --stats will output the results -z zip -a archive -A preserve ACL -x don't cross filesystem boundaries -h human readable -e specify the remote shell to use
This is sample output - yours may be different.
2

rsync --delete --stats -zaAxh -e ssh /local_directory/ username@IP_of_remote:/Remote_Directory/ > /Text_file_Directory/backuplog.txt

chicagonpg · 2019-09-10 21:00:29 92
SSH to a machine's internet address if it is not present on your local network

Ping machine once, waiting 1 second for response until failing. Upon fail, ssh globally, otherwise ssh locally.
This is sample output - yours may be different.
1

ping localip -c 1 -W 1 &> /dev/null && ssh localip || ssh globalip

trey · 2009-02-05 10:40:26 524
Validate openssh key & print checksum
This is sample output - yours may be different.
1

ssh-keygen -l -f [pubkey] | awk '{print $2}' | tr -ds ':' '' | egrep -ie "[a-f0-9]{32}"

wwest4 · 2009-02-05 17:42:30 16
Adhoc tar backup

Creates a quick backup with tar to a remote host over ssh.
This is sample output - yours may be different.
1

tar -cvzf - /source/path | ssh <targethostname> -l <username> dd of=/destination/path/backupfile.tgz

smm · 2009-02-06 15:52:09 12
run command on a group of nodes in parallel
This is sample output - yours may be different.
1

echo -n m{1..5}.cluster.net | xargs -d' ' -n1 -P5 -I{} ssh {} 'uptime'

jianingy · 2009-02-08 12:34:04 15
tunnel vnc port

Foward vnc securely from exampleserver.com Show Sample Output
This is sample output - yours may be different.
```
user@exampleserver.com's password:
```
1

ssh -L 5900:localhost:5900 user@exampleserver.com

Jackie · 2009-02-13 04:53:27 9
Connect to remote machine with other enconding charset
This is sample output - yours may be different.
1

LC_ALL=fr_FR luit ssh root@remote_machine_ip

irraz · 2009-03-03 22:42:37 5
Copy files and directories from a remote machine to the local machine

This command will copy files and directories from a remote machine to the local one. Ensure you are in the local directory you want to populate with the remote files before running the command. To copy a directory and it's contents, you could: ssh user@host "(cd /path/to/a/directory ; tar cvf - ./targetdir)" | tar xvf - This is especially useful on *nix'es that don't have 'scp' installed by default.
This is sample output - yours may be different.
1

ssh user@host "(cd /path/to/remote/top/dir ; tar cvf - ./*)" | tar xvf -

dopeman · 2009-03-31 13:08:45 9
Backup with SSH in a archive

PRIVATEKEY - Of course the full path to the private key \n HOST - The host where to get the backup \n SOURCE - The directory you wish to backup \n DESTINATION - The destination for the backup on your local machine
This is sample output - yours may be different.
1

ssh -i $PRIVATEKEY $HOST -C 'cd $SOURCE; tar -cz --numeric-owner .' | tee $DESTINATION/backup.tgz | tar -tz

GeckoDH · 2009-05-18 20:36:45 4
clone a hard drive to a remote directory via ssh tunnel, and compressing the image
This is sample output - yours may be different.
1

# dd if=/dev/sda | gzip -c | ssh user@ip 'dd of=/mnt/backups/sda.dd'

coolman · 2009-07-06 19:05:55 7
Pull up remote desktop for other than gnome/kde eg fluxbox

If the remote doesn't export its desktop (eg fluxbox, blackbox etc) then you need to run a x11vnc server there and a vncviewer at the local end. This command does the lot for you - it assumes that you can 'ssh' to the box without a password and that x11vnc is installed at the remote end.
This is sample output - yours may be different.
1

rdp() { ssh $1 sh -c 'PATH=$PATH:/usr/local/bin; x11vnc -q -rfbauth ~/.vnc/passwd -display :0' & sleep 4; vncviewer $1:0 & }

bhepple · 2009-11-25 07:21:02 3
test moduli file generated for openssh

this command test the moduli file generated by the command ssh-keygen -G /tmp/moduli-2048.candidates -b 2048 . The test can be long depend of your cpu power , around 5 minutes to 30 minutes
This is sample output - yours may be different.
1

ssh-keygen -T moduli-2048 -f /tmp/moduli-2048.candidates

eastwind · 2010-01-29 19:35:21 3
Skip banner on ssh login prompt

This allows you to skip the banner (usually /etc/issue.net) on ssh connections. Useful to avoid banners outputted to your mail by rsync cronjobs.
This is sample output - yours may be different.
1

ssh -q user@server

KoRoVaMiLK · 2010-03-24 12:02:55 4
‹ First < 5 6 7 8 9 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

create shortcut keys in bash

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

delete duplicate lines from a file and keep the order of the other lines

i wanted to delete all duplicate lines from .bash_history and keep the order of the other lines. the command cat's the file and adds line numbers, then sorts by the second column. afterwards uniq omits repeated lines, but skips the first field (the line number). then it sorts by the line numbers and at the end cuts the numbers off.

a function to find the fastest DNS server

http://public-dns.info gives a list of online dns servers. you need to change the country in url (br in this url) with your country code. this command need some time to ping all IP in list.

Create user add lines from partial passwd file

Handy if you are installing a new server or recovering an old one and you have a passwd file with the accounts you want to add to the server. If you edit the file so that only the accounts that you want to add are left this line will spit out the correct useradd lines. The uid, gecos and shell will be preserved.

Get a range of SVN revisions from svn diff and tar gz them

Handy when you need to create a list of files to be updated when subversion is not available on the remote host. You can take this tar file, and upload and extract it where you need it. Replace M and N with the revisions specific to yours. Make sure you do this from an updated (svn up) working directory.

Create a listing of all possible permissions and their octal representation.

archlinux: check which repository packages have updates available

Shows which packages from the official repositories (not aur) have updates available. For most accurate output, the mirrors and package lists should be up to date.

Steve Reich - Piano Phase; interpreter: Bourne-Again Shell.

The Piano Phase piece, by Steve Reich is a minimalist composition which is played on two pianos played at slightly different tempos, a task that's very difficult to accomplish by human players. The auditive effects produced by the cell displacement produce beautiful patterns. See https://en.wikipedia.org/wiki/Piano_Phase . My rendered version: https://ydor.org/SteveReich/piano_phase.mp3 Requires sox to be installed on the system. There are multiple videos on youtube showing different approaches and experiences to this interpretation. There is also a synthesized version. Even if Bash can behave as a powerful pianist, a simple threaded version leaves full room to several time glitches and even negative displacements, the same issues that human pianists experience when playing the piece. The older the computer, the better the chaos added to the result due to the CPU load. Apparently that's the reason Steve Reich composes pieces such as this. Without further ado, please give a warm welcome to the Bash minimalist player on synthesized two-threaded pianos. Please turn off your cellphones.

Upload a video to youtube

Google just released a new commend line tool offering all sorts of new services from the commend line. One of them is uploading a youtube video but there are plenty more google services to interact with. Download it here: http://code.google.com/p/googlecl/ Manual: http://code.google.com/p/googlecl/wiki/Manual

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using ssh

Commands using ssh (347) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using ssh (347)

sorted by