All commands

All commands (14,187)

sorted by

Optimal way of deleting huge numbers of files

Using xargs is better than: find /path/to/dir -type f -exec rm \-f {} \; as the -exec switch uses a separate process for each remove. xargs splits the streamed files into more managable subsets so less processes are required.
This is sample output - yours may be different.
12

find /path/to/dir -type f -print0 | xargs -0 rm

root · 2009-01-26 11:30:47 63
Display PHP files that directly instantiate a given class

This greps all PHP files for a given classname and displays both the file and the usage. Show Sample Output
This is sample output - yours may be different.
```
tao/tests/filter/TestUrl.php:        $this->objFilter = new filter_Url();
tao/classes/local/view/Photos.php:        $objFilter  = new filter_Url();
```
1

find . -name "*.php" -exec grep \-H "new filter_" {} \;

root · 2009-01-26 10:43:09 73
Run the last command as root

Useful when you forget to use sudo for a command. "!!" grabs the last run command.
This is sample output - yours may be different.
1219

sudo !!

root · 2009-01-26 10:26:48 262
Creates a customized search command

Creates a command alias ('cr' in the above example) that searches the contents of files matching a set of file extensions (C & C++ source-code in the above example) recursively within the current directory. Search configured to be in colour, ignore-case, show line numbers and show 4 lines of context. Put in shell initialisation file of your choice. Trivially easy to use, e.g: cr sha1_init Show Sample Output
This is sample output - yours may be different.
```
./openssl/signatures.c-600-xmlSecOpenSSLDsaSha1EvpInit(EVP_MD_CTX *ctx)
./openssl/signatures.c-601-{
./openssl/signatures.c:602:    return SHA1_Init(ctx->md_data);
./openssl/signatures.c-603-}
./openssl/signatures.c-604-
--
./openssl/signatures.c-706-    NULL,
./openssl/signatures.c-707-#else /* XMLSEC_OPENSSL_096 */
./openssl/signatures.c:708:    SHA1_Init,
./openssl/signatures.c-709-    SHA1_Update,
./openssl/signatures.c-710-    SHA1_Final,
```
0

alias cr='find . 2>/dev/null -regex '\''.*\.$c\|cpp\|pc\|h\|hpp\|cc$$'\'' | xargs grep --color=always -ni -C2'

chrisdrew · 2009-01-26 08:54:25 56
Outputs a sorted list of disk usage to a text file

Recursively searches current directory and outputs sorted list of each directory's disk usage to a text file. Show Sample Output
This is sample output - yours may be different.
```
712     .
328     ./test
176     ./lib
144     ./doc
100     ./test/data
96      ./lib/rake
64      ./doc/release_notes
```
6

du | sort -gr > file_sizes

chrisdrew · 2009-01-26 01:12:54 62
Watch how fast the files in a drive are being deleted

This can be useful when a large remove operation is taking place.
This is sample output - yours may be different.
6

watch "df | grep /path/to/drive"

root · 2009-01-25 21:16:41 674
Execute a command at a given time

This is an alternative to cron which allows a one-off task to be scheduled for a certain time.
This is sample output - yours may be different.
266

echo "ls -l" | at midnight

root · 2009-01-25 21:07:42 85
Analyse an Apache access log for the most common IP addresses

This uses awk to grab the IP address from each request and then sorts and summarises the top 10.
This is sample output - yours may be different.
22

tail -10000 access_log | awk '{print $1}' | sort | uniq -c | sort -n | tail

root · 2009-01-25 21:01:52 47
Add SVN keywords property to all PHP and Javascript files
This is sample output - yours may be different.
3

find . $ -name "*.php" -o -name "*.js" $ -exec svn propset svn:keywords Id {} \;

root · 2009-01-24 00:54:35 63
Count files beneath current directory (including subfolders)
This is sample output - yours may be different.
18

find . -type f | wc -l

root · 2009-01-23 17:19:32 74

Display the top ten running processes - sorted by memory usage

ps returns all running processes which are then sorted by the 4th field in numerical order and the top 10 are sent to STDOUT. Show Sample Output

106

ps aux | sort -nk +4 | tail

root · 2009-01-23 17:12:33 295

Checks all MySQL tables

See http://dev.mysql.com/doc/refman/5.0/en/myisamchk.html for further details. You can also repair all tables by running: myisamchk -r *.MYI
This is sample output - yours may be different.
-2

myisamchk /path/to/mysql/files/*.MYI

root · 2009-01-22 10:20:00 133
‹ First < 566 567 568

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

See system users

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Convert mkv to SVCD/DivX

ffmpeg supports mkv

Countdown Clock

The biggest advantage over atoponce's nifty original is not killing the scrollback. Written assuming bash, but shouldn't be terribly difficult to port to other shells. S should be multiple spaces, but I can't get commandlinefu to save/show them properly, any help?

Recursively remove directory with many files quickly

rsync'ing an empty directory over a directory to be deleted recursively is much faster than using rm -rf, for various reasons. Relevant only for directories with really a lot of files.

Unlock VMs in Proxmox

Unlock your VMS to avoid problems after some failed tasks ended.

Alias TAIL for automatic smart output

Run the alias command, then issue $ps aux | tail and resize your terminal window (putty/console/hyperterm/xterm/etc) then issue the same command and you'll understand. $ ${LINES:-`tput lines 2>/dev/null||echo -n 12`} Insructs the shell that if LINES is not set or null to use the output from `tput lines` ( ncurses based terminal access ) to get the number of lines in your terminal. But furthermore, in case that doesn't work either, it will default to using the default of 80. The default for TAIL is to output the last 10 lines, this alias changes the default to output the last x lines instead, where x is the number of lines currently displayed on your terminal - 7. The -7 is there so that the top line displayed is the command you ran that used TAIL, ie the prompt. Depending on whether your PS1 and/or PROMPT_COMMAND output more than 1 line (mine is 3) you will want to increase from -2. So with my prompt being the following, I need -7, or - 5 if I only want to display the commandline at the top. ( http://www.askapache.com/linux/bash-power-prompt.html ) 275MB/748MB [7995:7993 - 0:186] 06:26:49 Thu Apr 08 [askapache@n1-backbone5:/dev/pts/0 +1] ~ $ In most shells the LINES variable is created automatically at login and updated when the terminal is resized (28 linux, 23/20 others for SIGWINCH) to contain the number of vertical lines that can fit in your terminal window. Because the alias doesn't hard-code the current LINES but relys on the $LINES variable, this is a dynamic alias that will always work on a tty device.

Probably, most frequent use of diff

This form is used in patches, svn, git etc. And I've created an alias for it: alias diff='diff -Naur --strip-trailing-cr' The latter option is especially useful, when somebody in team works in Windows; could be also used in commands like $ svn diff --diff-cmd 'diff --strip-trailing-cr'...

Every Nth line position # (SED)

sed extract every nth line. Generic is: $ sed -n 'STARTPOSITION,${p;n;*LINE}' foo where n;*LINE = how many lines. thus p;n;n; is "for every 3 lines" and p;n;n;n;n; is "for every 5 lines"

list block devices

Shows all block devices in a tree with descruptions of what they are.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by