All commands

All commands (14,187)

sorted by

Optimal way of deleting huge numbers of files

Using xargs is better than: find /path/to/dir -type f -exec rm \-f {} \; as the -exec switch uses a separate process for each remove. xargs splits the streamed files into more managable subsets so less processes are required.
This is sample output - yours may be different.
12

find /path/to/dir -type f -print0 | xargs -0 rm

root · 2009-01-26 11:30:47 62
Display PHP files that directly instantiate a given class

This greps all PHP files for a given classname and displays both the file and the usage. Show Sample Output
This is sample output - yours may be different.
```
tao/tests/filter/TestUrl.php:        $this->objFilter = new filter_Url();
tao/classes/local/view/Photos.php:        $objFilter  = new filter_Url();
```
1

find . -name "*.php" -exec grep \-H "new filter_" {} \;

root · 2009-01-26 10:43:09 73
Run the last command as root

Useful when you forget to use sudo for a command. "!!" grabs the last run command.
This is sample output - yours may be different.
1219

sudo !!

root · 2009-01-26 10:26:48 250
Creates a customized search command

Creates a command alias ('cr' in the above example) that searches the contents of files matching a set of file extensions (C & C++ source-code in the above example) recursively within the current directory. Search configured to be in colour, ignore-case, show line numbers and show 4 lines of context. Put in shell initialisation file of your choice. Trivially easy to use, e.g: cr sha1_init Show Sample Output
This is sample output - yours may be different.
```
./openssl/signatures.c-600-xmlSecOpenSSLDsaSha1EvpInit(EVP_MD_CTX *ctx)
./openssl/signatures.c-601-{
./openssl/signatures.c:602:    return SHA1_Init(ctx->md_data);
./openssl/signatures.c-603-}
./openssl/signatures.c-604-
--
./openssl/signatures.c-706-    NULL,
./openssl/signatures.c-707-#else /* XMLSEC_OPENSSL_096 */
./openssl/signatures.c:708:    SHA1_Init,
./openssl/signatures.c-709-    SHA1_Update,
./openssl/signatures.c-710-    SHA1_Final,
```
0

alias cr='find . 2>/dev/null -regex '\''.*\.$c\|cpp\|pc\|h\|hpp\|cc$$'\'' | xargs grep --color=always -ni -C2'

chrisdrew · 2009-01-26 08:54:25 56
Outputs a sorted list of disk usage to a text file

Recursively searches current directory and outputs sorted list of each directory's disk usage to a text file. Show Sample Output
This is sample output - yours may be different.
```
712     .
328     ./test
176     ./lib
144     ./doc
100     ./test/data
96      ./lib/rake
64      ./doc/release_notes
```
6

du | sort -gr > file_sizes

chrisdrew · 2009-01-26 01:12:54 62
Watch how fast the files in a drive are being deleted

This can be useful when a large remove operation is taking place.
This is sample output - yours may be different.
6

watch "df | grep /path/to/drive"

root · 2009-01-25 21:16:41 674
Execute a command at a given time

This is an alternative to cron which allows a one-off task to be scheduled for a certain time.
This is sample output - yours may be different.
266

echo "ls -l" | at midnight

root · 2009-01-25 21:07:42 85
Analyse an Apache access log for the most common IP addresses

This uses awk to grab the IP address from each request and then sorts and summarises the top 10.
This is sample output - yours may be different.
22

tail -10000 access_log | awk '{print $1}' | sort | uniq -c | sort -n | tail

root · 2009-01-25 21:01:52 47
Add SVN keywords property to all PHP and Javascript files
This is sample output - yours may be different.
3

find . $ -name "*.php" -o -name "*.js" $ -exec svn propset svn:keywords Id {} \;

root · 2009-01-24 00:54:35 63
Count files beneath current directory (including subfolders)
This is sample output - yours may be different.
18

find . -type f | wc -l

root · 2009-01-23 17:19:32 74

Display the top ten running processes - sorted by memory usage

ps returns all running processes which are then sorted by the 4th field in numerical order and the top 10 are sent to STDOUT. Show Sample Output

106

ps aux | sort -nk +4 | tail

root · 2009-01-23 17:12:33 294

Checks all MySQL tables

See http://dev.mysql.com/doc/refman/5.0/en/myisamchk.html for further details. You can also repair all tables by running: myisamchk -r *.MYI
This is sample output - yours may be different.
-2

myisamchk /path/to/mysql/files/*.MYI

root · 2009-01-22 10:20:00 133
‹ First < 566 567 568

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Weather on the Command line

Get your weather from a weather station just blocks from your home. Go to http://www.wunderground.com/wundermap/ and find a weather station near you. Click on a temperature bubble for that area. When the window pops up, click on hypertext link with the station ID, then on the bottom right of the page, click on the Current Conditions XML. Thats your link! Good luck!

Verify/edit bash history command before executing it

Bash history commands are those that begin with the character ! (eg. the most popular 'sudo !!' Explained here => http://www.commandlinefu.com/commands/view/13). By default bash immediately executes the history command. Setting this shell option will make bash first allow you to verify/edit an history command before executing it. To set this option permanently, put this command in ~/.profile or ~/.bashrc file. To unset this option issue following command. $shopt -u histverify

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Kill all processes that listen to ports begin with 50 (50, 50x, 50xxx,...)

Run netstat as root (via sudo) to get the ID of the process listening on the desired socket. Use awk to 1) match the entry that is the listening socket, 2) matching the exact port (bounded by leading colon and end of column), 3) remove the trailing slash and process name from the last column, and finally 4) use the system(…) command to call kill to terminate the process. Two direct commands, netstat & awk, and one forked call to kill. This does kill the specific port instead of any port that starts with 50. I consider this to be safer.

a find and replace within text-based files, to locate and rewrite text en mass.

syntax follows regular command line expression. example: let's say you have a directory (with subdirs) that has say 4000 .php files. All of these files were made via script, but uh-oh, there was a typo! if the typo is "let's go jome!" but you meant it to say "let's go home!" find . -name "*.php" | xargs perl -pi -e "s/let\'s\ go\ jome\!/let\'s\ go\ home\!/g" all better :) multiline: find . -name "*.php" | xargs perl -p0777i -e 's/knownline1\nknownline2/replaced/m' indescriminate line replace: find ./ -name '*.php' | xargs perl -pi -e 's/\".*$\"/\new\ line\ content/g'

find .txt files inside a directory and replace every occurrance of a word inside them via sed

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Get a shell with a not available account

check open ports without netstat or lsof

Print a list of all hardlinks in the working directory, recursively

libpurple likes to hardlink files repeatedly. To ignore libpurple, use sed: | sed '/\.\/\.purple/d'

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by