All commands

All commands (14,187)

sorted by

Optimal way of deleting huge numbers of files

Using xargs is better than: find /path/to/dir -type f -exec rm \-f {} \; as the -exec switch uses a separate process for each remove. xargs splits the streamed files into more managable subsets so less processes are required.
This is sample output - yours may be different.
12

find /path/to/dir -type f -print0 | xargs -0 rm

root · 2009-01-26 11:30:47 63
Display PHP files that directly instantiate a given class

This greps all PHP files for a given classname and displays both the file and the usage. Show Sample Output
This is sample output - yours may be different.
```
tao/tests/filter/TestUrl.php:        $this->objFilter = new filter_Url();
tao/classes/local/view/Photos.php:        $objFilter  = new filter_Url();
```
1

find . -name "*.php" -exec grep \-H "new filter_" {} \;

root · 2009-01-26 10:43:09 73
Run the last command as root

Useful when you forget to use sudo for a command. "!!" grabs the last run command.
This is sample output - yours may be different.
1219

sudo !!

root · 2009-01-26 10:26:48 262
Creates a customized search command

Creates a command alias ('cr' in the above example) that searches the contents of files matching a set of file extensions (C & C++ source-code in the above example) recursively within the current directory. Search configured to be in colour, ignore-case, show line numbers and show 4 lines of context. Put in shell initialisation file of your choice. Trivially easy to use, e.g: cr sha1_init Show Sample Output
This is sample output - yours may be different.
```
./openssl/signatures.c-600-xmlSecOpenSSLDsaSha1EvpInit(EVP_MD_CTX *ctx)
./openssl/signatures.c-601-{
./openssl/signatures.c:602:    return SHA1_Init(ctx->md_data);
./openssl/signatures.c-603-}
./openssl/signatures.c-604-
--
./openssl/signatures.c-706-    NULL,
./openssl/signatures.c-707-#else /* XMLSEC_OPENSSL_096 */
./openssl/signatures.c:708:    SHA1_Init,
./openssl/signatures.c-709-    SHA1_Update,
./openssl/signatures.c-710-    SHA1_Final,
```
0

alias cr='find . 2>/dev/null -regex '\''.*\.$c\|cpp\|pc\|h\|hpp\|cc$$'\'' | xargs grep --color=always -ni -C2'

chrisdrew · 2009-01-26 08:54:25 56
Outputs a sorted list of disk usage to a text file

Recursively searches current directory and outputs sorted list of each directory's disk usage to a text file. Show Sample Output
This is sample output - yours may be different.
```
712     .
328     ./test
176     ./lib
144     ./doc
100     ./test/data
96      ./lib/rake
64      ./doc/release_notes
```
6

du | sort -gr > file_sizes

chrisdrew · 2009-01-26 01:12:54 62
Watch how fast the files in a drive are being deleted

This can be useful when a large remove operation is taking place.
This is sample output - yours may be different.
6

watch "df | grep /path/to/drive"

root · 2009-01-25 21:16:41 674
Execute a command at a given time

This is an alternative to cron which allows a one-off task to be scheduled for a certain time.
This is sample output - yours may be different.
266

echo "ls -l" | at midnight

root · 2009-01-25 21:07:42 85
Analyse an Apache access log for the most common IP addresses

This uses awk to grab the IP address from each request and then sorts and summarises the top 10.
This is sample output - yours may be different.
22

tail -10000 access_log | awk '{print $1}' | sort | uniq -c | sort -n | tail

root · 2009-01-25 21:01:52 47
Add SVN keywords property to all PHP and Javascript files
This is sample output - yours may be different.
3

find . $ -name "*.php" -o -name "*.js" $ -exec svn propset svn:keywords Id {} \;

root · 2009-01-24 00:54:35 63
Count files beneath current directory (including subfolders)
This is sample output - yours may be different.
18

find . -type f | wc -l

root · 2009-01-23 17:19:32 74

Display the top ten running processes - sorted by memory usage

ps returns all running processes which are then sorted by the 4th field in numerical order and the top 10 are sent to STDOUT. Show Sample Output

106

ps aux | sort -nk +4 | tail

root · 2009-01-23 17:12:33 295

Checks all MySQL tables

See http://dev.mysql.com/doc/refman/5.0/en/myisamchk.html for further details. You can also repair all tables by running: myisamchk -r *.MYI
This is sample output - yours may be different.
-2

myisamchk /path/to/mysql/files/*.MYI

root · 2009-01-22 10:20:00 133
‹ First < 566 567 568

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Slow Down Command Output

( Or $ ls -lat|lolcat -a if you like it in technicolor - apt install lolcat if needed )

Format partition with ext4 but without a journal

For slow flash memory (cheap thumb drive), ext4 is the fastest stable file system for all use cases with no relevant exception: http://www.linuxplanet.com/linuxplanet/tutorials/7208/1 Since we can usually dispense with the benefits of a journal for this type of storage, this is a way to achieve the least awful I/O-speed. Disabling the journal for an existing ext4 partition can be achieved using $ tune2fs -O ^has_journal /dev/sdXN Note that it is often recommended to format removable flash media with ext2, due to the lack of a journal. ext4 has many advantages over ext2 even without the journal, with much better speed as one of the consequences. So the only usecase for ext2 would be compatibility with very old software.

Compare prices in euro of the HTC Desire on all the european websites of Expansys.

You think Expansys in all these countries will sell the HTC Desire for the same price? Well, you'll be surprised. Most of them will be sold at 499.99 EUR but the cheapest can be found in Germany and the most expensive, in Belgium.

Randomize lines in a file

Works in sort (GNU coreutils) 7.4, don't know when it was implemented but sometime the last 6 years.

list block devices

Shows all block devices in a tree with descruptions of what they are.

Compute the average number of KB per file for each dir

Shorter version using --tag

Remove all unused kernels with apt-get

A little aptitude magic. Note: this will remove images AND headers. If you just want to remove images: aptitude remove ?and(~i~nlinux-im ?not(~n`uname -r`)) I used this in zsh without any problems. I'm not sure how other shells will interpret some of the special characters used in the aptitude search terms. Use -s to simulate.

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Make ls output better visible on dark terminals in bash

Sometimes you have a situation where you cannot properly see the ls output when you are using a terminal w/a dark background. Usually bash has ls aliased to use colors, and you can easily get ls to use the default foreground color via simply unaliasing the command.

Show drive names next to their full serial number (and disk info)

As of this writing, this requires a fairly recent version of util-linux, but is much simpler than the previous alternatives. Basically, lsblk gives a nice, human readable interface to all the blkid stuff. (Of course, I wouldn't recommend this if you're going to be parsing the output.) This command takes all the fun out of the previous nifty pipelines, but I felt I ought to at least mention it as an alternative since it is the most practical.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by