All commands

All commands (14,187)

sorted by

Optimal way of deleting huge numbers of files

Using xargs is better than: find /path/to/dir -type f -exec rm \-f {} \; as the -exec switch uses a separate process for each remove. xargs splits the streamed files into more managable subsets so less processes are required.
This is sample output - yours may be different.
12

find /path/to/dir -type f -print0 | xargs -0 rm

root · 2009-01-26 11:30:47 62
Display PHP files that directly instantiate a given class

This greps all PHP files for a given classname and displays both the file and the usage. Show Sample Output
This is sample output - yours may be different.
```
tao/tests/filter/TestUrl.php:        $this->objFilter = new filter_Url();
tao/classes/local/view/Photos.php:        $objFilter  = new filter_Url();
```
1

find . -name "*.php" -exec grep \-H "new filter_" {} \;

root · 2009-01-26 10:43:09 73
Run the last command as root

Useful when you forget to use sudo for a command. "!!" grabs the last run command.
This is sample output - yours may be different.
1219

sudo !!

root · 2009-01-26 10:26:48 250
Creates a customized search command

Creates a command alias ('cr' in the above example) that searches the contents of files matching a set of file extensions (C & C++ source-code in the above example) recursively within the current directory. Search configured to be in colour, ignore-case, show line numbers and show 4 lines of context. Put in shell initialisation file of your choice. Trivially easy to use, e.g: cr sha1_init Show Sample Output
This is sample output - yours may be different.
```
./openssl/signatures.c-600-xmlSecOpenSSLDsaSha1EvpInit(EVP_MD_CTX *ctx)
./openssl/signatures.c-601-{
./openssl/signatures.c:602:    return SHA1_Init(ctx->md_data);
./openssl/signatures.c-603-}
./openssl/signatures.c-604-
--
./openssl/signatures.c-706-    NULL,
./openssl/signatures.c-707-#else /* XMLSEC_OPENSSL_096 */
./openssl/signatures.c:708:    SHA1_Init,
./openssl/signatures.c-709-    SHA1_Update,
./openssl/signatures.c-710-    SHA1_Final,
```
0

alias cr='find . 2>/dev/null -regex '\''.*\.$c\|cpp\|pc\|h\|hpp\|cc$$'\'' | xargs grep --color=always -ni -C2'

chrisdrew · 2009-01-26 08:54:25 56
Outputs a sorted list of disk usage to a text file

Recursively searches current directory and outputs sorted list of each directory's disk usage to a text file. Show Sample Output
This is sample output - yours may be different.
```
712     .
328     ./test
176     ./lib
144     ./doc
100     ./test/data
96      ./lib/rake
64      ./doc/release_notes
```
6

du | sort -gr > file_sizes

chrisdrew · 2009-01-26 01:12:54 62
Watch how fast the files in a drive are being deleted

This can be useful when a large remove operation is taking place.
This is sample output - yours may be different.
6

watch "df | grep /path/to/drive"

root · 2009-01-25 21:16:41 674
Execute a command at a given time

This is an alternative to cron which allows a one-off task to be scheduled for a certain time.
This is sample output - yours may be different.
266

echo "ls -l" | at midnight

root · 2009-01-25 21:07:42 85
Analyse an Apache access log for the most common IP addresses

This uses awk to grab the IP address from each request and then sorts and summarises the top 10.
This is sample output - yours may be different.
22

tail -10000 access_log | awk '{print $1}' | sort | uniq -c | sort -n | tail

root · 2009-01-25 21:01:52 47
Add SVN keywords property to all PHP and Javascript files
This is sample output - yours may be different.
3

find . $ -name "*.php" -o -name "*.js" $ -exec svn propset svn:keywords Id {} \;

root · 2009-01-24 00:54:35 63
Count files beneath current directory (including subfolders)
This is sample output - yours may be different.
18

find . -type f | wc -l

root · 2009-01-23 17:19:32 74

Display the top ten running processes - sorted by memory usage

ps returns all running processes which are then sorted by the 4th field in numerical order and the top 10 are sent to STDOUT. Show Sample Output

106

ps aux | sort -nk +4 | tail

root · 2009-01-23 17:12:33 294

Checks all MySQL tables

See http://dev.mysql.com/doc/refman/5.0/en/myisamchk.html for further details. You can also repair all tables by running: myisamchk -r *.MYI
This is sample output - yours may be different.
-2

myisamchk /path/to/mysql/files/*.MYI

root · 2009-01-22 10:20:00 133
‹ First < 566 567 568

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Share your terminal session real-time

One person does `mkfifo foo; script -f foo' and another can supervise real-time what is being done using `cat foo'.

Limit bandwidth usage by apt-get

Limits the usage of bandwidth by apt-get, in the example the command will use 30Kb/s ;) It should work for most apt-get actions (install, update, upgrade, dist-upgrade, etc.)

find all active IP addresses in a network

tee to a file descriptor

the tee command does fine with file names, but not so much with file descriptors, such as &2 (stderr). This uses process redirection to tee to the specified descriptor. In the sample output, it's being used to tee to stderr, which is connected with the terminal, and to wc -l, which is also outputting to the terminal. The result is the output of bash --version followed by the linecount

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Get your Firefox bookmarks

Extracts yours bookmarks out of sqlite with the format: dateAdded|url

cycle through everything sox knows how to read, playing only the first three seconds

I wasted two hours reading the sox documentation and searching on the web for the format of some obscure fscking sound sample, and then finally came up with this. This plays only the first three seconds of your unknown formatted sound file using every one of sox's built-in filetypes. If you don't get an exact match, you may get close. . I could not fit every single type in and keep it under 127 characters, so you will have to replace "..." with the full list obtainable by `$ sox --help` (or try `Show sample output`) . note: /usr/bin/play should be linked to sox on most systems.

convert markdown to PDF

This is the one-line version of this htmldoc + markdown combo to convert markdown formatted text to PDF files to distribute to your non-savvy project managers. http://scottnesbitt.net/ubuntublog/?p=114

Multi-thread any command

For instance: $ find . -type f -name '*.wav' -print0 |xargs -0 -P 3 -n 1 flac -V8 will encode all .wav files into FLAC in parallel. Explanation of xargs flags: -P [max-procs]: Max number of invocations to run at once. Set to 0 to run all at once [potentially dangerous re: excessive RAM usage]. -n [max-args]: Max number of arguments from the list to send to each invocation. -0: Stdin is a null-terminated list. I use xargs to build parallel-processing frameworks into my scripts like the one here: http://pastebin.com/1GvcifYa

Matrix Style

Same as the cool matrix style command ( http://www.commandlinefu.com/commands/view/3652/matrix-style ), except replacing the printed character with randomness. The command mentioned is much faster and thus more true to the matrix. However, mine can be optimized, but I wasted ... i mean spent enough time on it already

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by